Opens in a new tab

Home » Integrated Circuits ICs, Sensors » INA186A1IDCKR

INA186A1IDCKR

Zero-drift bidirectional current-sense amplifier, 25 V/V gain, 1.7V-5.5V supply, -0.2V to 40V CM range, SC70-6, offset +-50uV max

12450

Effective Inventory

Image for reference only

Manufacturer Part:

INA186A1IDCKR

Package:

SC70-6 (DCK, 2.00 x 1.25 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

INA186A1IDCKR — Bidirectional Zero-Drift Current-Sense Amplifier

1. Component Overview

The INA186A1IDCKR is a high-precision, bidirectional, zero-drift current-sense amplifier (also known as a current shunt monitor) manufactured by Texas Instruments. It is designed to sense the voltage drop across a shunt resistor and provide a scaled output voltage proportional to the current flowing through the load, independent of the common-mode bus voltage.

The “A1” variant features a fixed gain of 25 V/V. The device operates from a single supply of 1.7V to 5.5V and can handle common-mode voltages from –0.2V to +40V. Its ultra-low input bias current of 500 pA (typical) enables accurate microamp-level current measurements using larger sense resistors. The zero-drift architecture delivers an offset voltage of only ±50 µV (max), extending the measurable dynamic range significantly.

Housed in a compact 6-pin SC70 (DCK) package, the INA186A1IDCKR is ideal for space-constrained applications in consumer electronics, industrial systems, and IoT devices.

2. Key Specifications

Parameter Value
Manufacturer Texas Instruments
Part Number INA186A1IDCKR
Component Type Current-Sense Amplifier (Zero-Drift)
Amplifier Type Current Sense
Fixed Gain 25 V/V
Common-Mode Voltage Range –0.2V to +40V
Supply Voltage (VS) 1.7V to 5.5V
Quiescent Current (IQ) 48 µA (typ), 90 µA (max)
Input Bias Current (IIB) 500 pA (typ)
Input Offset Voltage (VOS) ±5 µV (typ), ±50 µV (max)
Offset Voltage Drift 0.5 µV/°C (max)
Gain Error ±1% (max)
Gain Drift 10 ppm/°C (max)
Common-Mode Rejection Ratio (CMRR) 120 dB (min), ~150 dB (typ)
Gain Bandwidth Product 45 kHz
Slew Rate 0.3 V/µs
Output Type Rail-to-Rail
Current Sensing Direction Bidirectional
Package SC70-6 (DCK)
Mounting Type Surface Mount (SMT)
Operating Temperature –40°C to +125°C
ESD Rating (HBM) ±3,000 V
ESD Rating (CDM) ±1,000 V
Packing Tape & Reel (3,000 units/reel)
RoHS Compliant Yes

3. Pin Configuration & Package

Package: 6-Pin SC70 (DCK) — 2.00 mm × 1.25 mm

Pin No. Pin Name Function
1 REF Reference Pin — sets output zero-point for bidirectional sensing; connect to GND for unidirectional mode
2 GND Ground Reference
3 IN+ Non-Inverting Input (connect to high-side of shunt)
4 VS Supply Voltage (1.7V – 5.5V)
5 IN– Inverting Input (connect to low-side of shunt)
6 OUT Amplifier Output (rail-to-rail)

Note: The SC70 package does not include a dedicated ENABLE pin. The DCK and DDF packages support the REF pin for bidirectional operation.

4. Features & Functional Description

  • Zero-Drift Architecture: Chopper-stabilized design continuously corrects offset voltage, achieving ±5 µV typical offset. This enables precision measurement of very small voltage drops across low-value shunt resistors.
  • Ultra-Low Input Bias Current: 500 pA typical input bias current allows the use of higher-value sense resistors for microamp-level current measurement without significant measurement error.
  • Capacitively Coupled Input Stage: DC common-mode voltages are inherently blocked from downstream amplifier circuits, resulting in exceptionally high common-mode rejection (120 dB minimum, ~150 dB typical).
  • Ultra-Low Power Consumption: Only 48 µA quiescent current makes the INA186 ideal for battery-powered and energy-harvesting applications.
  • Bidirectional Current Sensing: The REF pin allows the output to be centered at a reference voltage, enabling measurement of current flowing in both directions through the shunt.
  • Wide Common-Mode Range: –0.2V to +40V common-mode range covers most bus voltages in consumer, industrial, and automotive systems.
  • Rail-to-Rail Output: Output swings to within 40 mV of the positive rail and 1 mV of ground, maximizing dynamic range especially at low supply voltages (e.g., 1.8V).
  • Five Gain Options Available: INA186A1 (25 V/V), A2 (50 V/V), A3 (100 V/V), A4 (200 V/V), A5 (500 V/V).

5. Typical Applications

  • Battery Monitoring: Charge/discharge current measurement in smartphones, laptops, and portable electronics.
  • Overcurrent Protection: Precise threshold detection for system protection in power supplies and motor drivers.
  • Power Management: Load current monitoring and power budgeting in servers, BBU (baseband units), and networking equipment.
  • Motor Control Feedback: Closed-loop current sensing in BLDC and stepper motor drive systems.
  • IoT Energy Meters: Ultra-low power consumption suits battery-operated smart meters and wireless sensors.
  • Solar Charge Controllers: Precise current measurement for MPPT optimization.
  • USB Type-C Power Delivery: Current monitoring for PD negotiation and overcurrent protection.

6. Equivalent & Alternative Parts

Part Number Manufacturer Description Key Differences
INA186A2IDCKR Texas Instruments Same device, 50 V/V gain Double the gain of A1 variant
INA186A3IDCKR Texas Instruments Same device, 100 V/V gain Higher gain for smaller shunt measurements
INA180A1 Texas Instruments Similar zero-drift current sense amp Different gain options, different package options
INA228 Texas Instruments Digital (I²C) current/power monitor Digital output vs. analog; integrated ADC
MAX4080F Analog Devices / Maxim High-side current sense amplifier Single supply, fixed gain, unidirectional
ACS37800 Allegro MicroSystems Isolated current sensor Galvanic isolation, higher current range
INA185A1 Texas Instruments Bidirectional current sense amplifier Lower CMRR, lower cost, different bandwidth

7. Design Recommendations

  • Select a shunt resistor value that produces an input differential voltage within the amplifier’s linear range. For 25 V/V gain and a 3.3V supply, maximum sense voltage is approximately 130 mV.
  • Place the INA186 as close as possible to the shunt resistor to minimize PCB trace resistance errors and noise pickup.
  • Use a 0.1 µF bypass capacitor on the VS pin near the IC for stable operation and noise filtering.
  • For bidirectional sensing, buffer the REF pin voltage with a low-impedance source to avoid CMRR degradation. A simple resistor divider without buffering is not recommended.
  • Add series protection resistors (≤ 1 kΩ) on IN+ and IN– inputs if the application is subject to voltage transients exceeding the absolute maximum ratings.
  • For transient protection, use Zener diodes or transzorbs (not standard TVS) to clamp fast voltage spikes, as specified in the TI application notes.
  • The SC70-6 package supports both high-side and low-side current sensing configurations. For low-side sensing, ensure the common-mode voltage stays within the specified –0.2V to +40V range.
Product Introduction: INA186A1IDCKR Product Introduction

The INA186A1IDCKR is a high-precision bidirectional zero-drift current-sense amplifier from Texas Instruments. The A1 variant features a fixed gain of 25 V/V. Its chopper-stabilized architecture continuously corrects offset voltage, achieving only +-5uV typical offset and 0.5uV/C drift, enabling precision measurement of very small voltage drops across low-value shunt resistors.

The device operates from a single 1.7V to 5.5V supply with only 48uA quiescent current, making it ideal for battery-powered applications. The ultra-low 500pA input bias current enables accurate microamp-level measurements. Common-mode voltage range of -0.2V to +40V covers most bus voltages in consumer, industrial, and IoT systems. The rail-to-rail output maximizes dynamic range at low supply voltages.

Working Principle: INA186A1IDCKR Working Principle

The INA186 senses the differential voltage across a shunt resistor and amplifies it by a fixed gain of 25 V/V. The output voltage equals Vout = (Vshunt x 25) + Vref, where Vref is set by the REF pin.

Zero-Drift Architecture: A chopper-stabilized front end continuously measures and cancels the input offset voltage through an auto-correction loop. This eliminates DC offset drift over temperature and time, achieving 0.5uV/C offset drift.

Capacitively Coupled Input Stage: DC common-mode voltage is inherently blocked from the downstream amplifier, resulting in exceptional CMRR of 120dB minimum (150dB typical).

Bidirectional Sensing: The REF pin allows centering the output at a reference voltage, enabling current measurement in both directions through the shunt. For unidirectional operation, connect REF to GND.

Output: Rail-to-rail output swings to within 40mV of positive rail and 1mV of ground.

Pin Description: INA186A1IDCKR Pin Definition and Functions
Pin Name Function
1 REF Reference Pin – sets output zero-point for bidirectional sensing
2 GND Ground Reference
3 IN+ Non-Inverting Input (connect to high-side of shunt)
4 VS Supply Voltage (1.7V to 5.5V)
5 IN- Inverting Input (connect to low-side of shunt)
6 OUT Amplifier Output (rail-to-rail)
Application Scenarios: In which products and applications is INA186A1IDCKR used
  • Battery Monitoring: Charge/discharge current measurement in smartphones, laptops, and portable electronics with bidirectional sensing capability.
  • Power Management: Load current monitoring and power budgeting in servers, BBU, and networking equipment.
  • IoT Energy Meters: Ultra-low 48uA power consumption suits battery-operated smart meters and wireless sensors.
  • Overcurrent Protection: Precise threshold detection with +-50uV max offset for system protection in power supplies.
  • USB Type-C Power Delivery: Current monitoring for PD negotiation and overcurrent protection.
Alternative Models: What chips are recommended as replacements for INA186A1IDCKR
Model Manufacturer Key Difference Package Specs
INA186A2IDCKR Texas Instruments Same device, 50 V/V gain Double the gain – –
INA186A3IDCKR Texas Instruments Same device, 100 V/V gain Higher gain for smaller shunts – –
INA180A1 Texas Instruments Similar zero-drift current sense amp Different gain/package options – –
INA228 Texas Instruments Digital I2C current/power monitor Digital output with integrated ADC – –
MAX4080F Analog Devices High-side current sense amplifier Unidirectional, fixed gain – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1