Opens in a new tab

Home » Integrated Circuits ICs, Sensors » INMP621ACEZ-R7

INMP621ACEZ-R7

MEMS microphone, 133dB SPL AOP, PDM, InvenSense

10509

Effective Inventory

Image for reference only

Manufacturer Part:

INMP621ACEZ-R7

Package:

LGA (4 x 3 x 1 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The INMP621ACEZ-R7 from InvenSense (TDK) is a wide dynamic range MEMS microphone with PDM digital output, achieving 133 dB SPL acoustic overload point and 65 dBA SNR. In a 4 x 3 x 1 mm LGA package, it delivers studio-quality audio capture for voice recognition, conferencing, and high-SPL recording applications.

Key Specifications

Type MEMS Microphone (bottom port)
Directivity Omnidirectional
Acoustic Overload Point 133 dB SPL (THD=10%)
SNR 65 dBA
Sensitivity -46 dBFS @ 94 dB SPL
Frequency Response 45 Hz – >20 kHz
Output PDM digital (single bit)
Supply Voltage 1.62 – 3.63 V
Current 1.2 mA (typical)
Package LGA (4 x 3 x 1 mm)
Operating Temperature -40 to +85 deg C

Features

  • 133 dB SPL acoustic overload for high-SPL environments
  • 65 dBA SNR for low-noise audio capture
  • PDM digital output eliminates external ADC requirement
  • Ultra-compact 4 x 3 x 1 mm bottom-port LGA package
  • 45 Hz to >20 kHz wideband frequency response
  • 1.2 mA low operating current
  • Stereo capability via L/R select pin

Applications

  • Voice recognition and smart speaker arrays
  • Video conferencing and telepresence audio
  • High-SPL music recording and live events
  • Automotive hands-free communication
  • Industrial acoustic monitoring and machine diagnostics
Product Introduction: INMP621ACEZ-R7 Product Introduction

The INMP621ACEZ-R7 from InvenSense (TDK) is a wide dynamic range MEMS microphone with PDM digital output in a 4 x 3 x 1 mm LGA package. With 133 dB SPL acoustic overload point and 65 dBA SNR, it captures audio from whisper-quiet to extreme SPL environments without clipping. The fourth-order sigma-delta modulator outputs a 1-bit PDM signal, eliminating the need for an external ADC. The 1.2 mA operating current and 45 Hz to >20 kHz frequency response suit battery-powered voice recognition, conferencing, and high-fidelity recording applications. Note: This product is EOL; InvenSense recommends T5838 as the replacement for new designs.

Working Principle: INMP621ACEZ-R7 Working Principle

The INMP621 uses a capacitive MEMS transducer where a thin polysilicon diaphragm is suspended above a perforated backplate, forming a variable capacitor. Sound pressure deflects the diaphragm, changing the capacitance. A CMOS ASIC integrates a charge amplifier, anti-aliasing filter, and fourth-order sigma-delta modulator on the same die as the MEMS structure. The modulator converts the analog capacitance change into a 1-bit PDM (Pulse Density Modulation) stream at the clock frequency (typically 2.4-4.8 MHz). The host codec or DSP decimates the PDM stream to produce a multi-bit PCM audio signal. The L/R select pin enables two INMP621 devices to share a single data line, with left and right channels time-multiplexed on alternate clock edges for stereo capture.

Pin Description: INMP621ACEZ-R7 Pin Definition and Functions
Pin Name Type Function
1 SCK Input PDM clock input from host codec/DSP
2 L/R SELECT Input Left/Right channel select (GND=Right, VDD=Left)
3 DOUT Output PDM data output to host
4 VDD Power Power supply 1.62-3.63V (0.1uF decoupling required)
5 GND Ground Ground reference
Application Scenarios: In which products and applications is INMP621ACEZ-R7 used
  • Voice recognition and smart speaker arrays
  • Video conferencing and telepresence audio
  • High-SPL music recording and live events
  • Automotive hands-free communication
  • Industrial acoustic monitoring and machine diagnostics
Alternative Models: What chips are recommended as replacements for INMP621ACEZ-R7
Manufacturer Part Number Package Notes
InvenSense INMP441 LGA Lower cost, 120dB SPL AOP alternative
InvenSense T5838 LGA Recommended replacement for new designs
TDK ICS-43434 LGA 32-bit I2S output alternative
Knowles SPH0645LM4H LGA 65dB SNR I2S alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1