Opens in a new tab

IR2110PBF

500V half-bridge gate driver, 2A peak, bootstrap, PDIP-14

6700

Effective Inventory

Image for reference only

Manufacturer Part:

IR2110PBF

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IR2110PBF is a high and low side gate driver from Infineon (IR) with 500V offset voltage, 2A output current, and independent channel control in a 14-pin PDIP package for IGBT and MOSFET half-bridge driving.

Key Specifications

Channels 2 (high side + low side)
Offset Voltage (VS) 500V max (floating high side)
Output Current (peak) 2A source, 2A sink
Supply Voltage (VCC) 10V to 20V
Logic Supply (VDD) 5V to 20V
Bootstrap Voltage (VB) 500V max floating
Switching Frequency Up to 500kHz
Rise/Fall Time 25ns/20ns typical (1000pF load)
Input Logic CMOS/LSTTL compatible
Shutdown Function SD pin disables both outputs
Operating Temperature -40°C to +125°C
Package PDIP-14 (through-hole)

Features

  • 500V high-side floating channel offset voltage
  • 2A peak output current for fast IGBT/MOSFET switching
  • Bootstrap operation eliminates need for isolated supply
  • Independent high-side and low-side input control
  • CMOS and LSTTL compatible logic inputs with pull-down
  • Shutdown pin for fault protection override
  • Cross-conduction prevention logic
  • Matched propagation delays for both channels

Applications

  • Motor drive inverters and servo amplifiers
  • Switching power supplies and half-bridge converters
  • Induction heating and welding equipment
  • Battery chargers and UPS systems
  • Class-D audio amplifiers
Product Introduction: IR2110PBF Product Introduction

The IR2110PBF is a high- and low-side gate driver IC from Infineon Technologies designed for driving IGBTs and power MOSFETs in half-bridge configurations. The high-side channel can operate at offset voltages up to 500V, enabling direct driving of the upper switch in a half-bridge without an isolated power supply. The bootstrap circuit generates the floating high-side supply from the VCC rail using an external diode and capacitor. Each channel can deliver 2A peak source/sink current, ensuring fast switching of large gate capacitances. Independent HIN and LIN inputs allow flexible PWM control, while the SD pin provides a global shutdown function for fault protection. Matched propagation delays between channels simplify dead-time management.

Working Principle: IR2110PBF Working Principle

The IR2110PBF uses a level-shifting circuit to translate the ground-referenced logic input (HIN) to the floating high-side output (HO) referenced to the VS node, which swings between ground and up to 500V. The level shifter uses high-voltage DMOS transistors that can withstand the 500V offset. When HIN goes high, a short pulse triggers the level shifter, which sets the high-side latch, turning on the HO output driver. When HIN goes low, another pulse resets the latch, turning off HO. The bootstrap circuit (external diode and capacitor) charges the VB capacitor to VCC when VS is near ground (low-side switch on). When the high-side switch turns on, VS rises, and the VB capacitor floats with it, maintaining the gate drive supply above VS. The under-voltage lockout (UVLO) on both the VCC and VB rails prevents operation when the supply is insufficient for full gate drive, protecting against partial turn-on and excessive power dissipation in the power switches. The SD pin overrides both channels simultaneously for emergency shutdown.

Pin Description: IR2110PBF Pin Definition and Functions
Pin Name Type Description
1 VCC Power Logic and low-side supply (10-20V)
2 COM Power Low-side return (ground)
3 LO Output Low-side gate driver output
4 NC — No connect
5 VS Power High-side floating supply return
6 VB Power High-side floating supply (bootstrap)
7 HO Output High-side gate driver output
8 NC — No connect
9 VDD Power Logic supply (5-20V)
10 HIN Input High-side logic input (active high)
11 SD Input Shutdown input (active high, both channels)
12 LIN Input Low-side logic input (active high)
13 VSS Power Logic ground
14 NC — No connect
Application Scenarios: In which products and applications is IR2110PBF used
  • Motor Drives: 500V offset drives upper IGBT in 3-phase inverter bridges for AC motor control
  • Half-Bridge Converters: Bootstrap operation eliminates isolated supply; 2A peak drives large MOSFET gates at high frequency
  • Induction Heating: High offset voltage and fast 25ns rise time suit resonant converters at hundreds of kHz
  • UPS Systems: SD pin provides immediate shutdown for overcurrent protection; matched delays simplify control
  • Class-D Audio: Up to 500kHz switching with low propagation delay enables high-fidelity PWM amplification
Alternative Models: What chips are recommended as replacements for IR2110PBF
Model Manufacturer Key Difference Package Specs
IR2110S Infineon SOIC-16 surface-mount version – –
IR2113PBF Infineon 600V offset, higher voltage version – –
IR2214PBF Infineon 1200V, 3-phase, IGBT driver – –
UCC27714DR TI 600V, 4A peak, SOIC-14 – –
FAN7390N onsemi/Fairchild 600V, 4A, DIP-14 – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1