Opens in a new tab

IR2181STRPBF

600V half-bridge gate driver, 2A peak, independent inputs, DIP-8, bootstrap, UVLO

5643

Effective Inventory

Image for reference only

Manufacturer Part:

IR2181STRPBF

Package:

DIP-8 (9.80 x 6.50 x 3.90 mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IR2181STRPBF from Infineon (formerly International Rectifier) is a 600V half-bridge gate driver with independent high and low side outputs in a DIP-8 package. With 2A peak output current and 600V level shifting, it drives MOSFETs/IGBTs in half-bridge power converters.

Key Specifications

High-Side Voltage 600 V (max offset)
Output Current +/-2 A peak (source and sink)
Input Logic CMOS compatible, independent HIN/LIN
Propagation Delay 180 ns (typical)
Rise/Fall Time 70 ns / 35 ns (typical, 1000pF load)
Supply Voltage 10 V to 20 V
Operating Temperature -40C to +125C

Features

  • 600V high-side floating supply for half-bridge driving
  • Independent HIN and LIN logic inputs for flexible control
  • 2A peak gate drive current for medium-power MOSFETs/IGBTs
  • Bootstrap operation with integrated bootstrap diode
  • Under-voltage lockout on both high and low side
  • Matched propagation delay for symmetrical switching

Applications

  • Half-bridge DC-DC converters and motor drives
  • Switch-mode power supply bridge converters
  • Induction heating and welding equipment
  • Lamp ballast and HID lighting drivers
Product Introduction: IR2181STRPBF Product Introduction

The IR2181STRPBF from Infineon (formerly International Rectifier) is a 600V half-bridge gate driver IC in a DIP-8 through-hole package. The device provides independent high-side (HO) and low-side (LO) gate drive outputs, each capable of sourcing and sinking 2A peak current. The high-side output floats up to 600V above the COM (ground) reference, enabling direct gate drive of the high-side N-channel MOSFET or IGBT in a half-bridge configuration. The bootstrap power supply technique uses an external bootstrap capacitor charged through the integrated bootstrap diode during the low-side on-time, eliminating the need for an isolated power supply. The independent HIN and LIN logic inputs allow non-overlapping control or complementary PWM drive from the MCU. Both high-side and low-side drivers include under-voltage lockout (UVLO) that disables the output when the supply voltage is insufficient, preventing incomplete gate enhancement. The 180ns matched propagation delay and 70ns/35ns typical rise/fall times support switching frequencies up to several hundred kHz.

Working Principle: IR2181STRPBF Working Principle

The IR2181STRPBF uses level-shifting and bootstrap techniques for half-bridge gate drive. (1) Low-Side Driver: The LIN input controls the LO output through a CMOS buffer stage. When LIN is high, LO drives the low-side MOSFET gate to VCC. When LIN is low, LO pulls the gate to COM. UVLO disables LO if VCC drops below ~8.6V. (2) High-Side Driver: The HIN input is level-shifted from the logic ground reference to the floating VS reference using a pulse-triggered level-shift circuit. When HIN goes high, a set pulse is sent through the level-shift to the high-side latch, turning on HO. When HIN goes low, a reset pulse turns off HO. (3) Bootstrap: The VB pin provides the floating supply for the high-side driver. During low-side on-time, the bootstrap capacitor charges from VCC through the bootstrap diode. During high-side on-time, the bootstrap capacitor supplies the gate charge current to the high-side MOSFET. (4) Dead Time: The independent HIN/LIN inputs allow the MCU to implement dead time control, ensuring both MOSFETs are never on simultaneously.

Pin Description: IR2181STRPBF Pin Definition and Functions
Pin Name Type Function
1 VCC Power Logic and low-side supply (10-20V)
2 HIN Input High-side logic input
3 LIN Input Low-side logic input
4 COM Ground Logic and low-side ground
5 LO Output Low-side gate drive output
6 VS Power High-side floating supply return
7 HO Output High-side gate drive output
8 VB Power High-side floating supply (bootstrap)
Application Scenarios: In which products and applications is IR2181STRPBF used
  • Half-bridge DC-DC converters and motor drives at 600V/2A
  • Switch-mode power supply bridge converters with bootstrap supply
  • Induction heating and welding equipment with independent HIN/LIN
  • Lamp ballast and HID lighting drivers with UVLO protection
Alternative Models: What chips are recommended as replacements for IR2181STRPBF
Manufacturer Part Number Package Notes
Infineon IR2184STRPBF DIP-8 Single input, half-bridge
Infineon IR2110PBF DIP-14 2A, 500V, more features
TI LM5106MAX/NOPB SOIC-8 1A, 100V, SMD version
Infineon 2ED21821S06JXUMA1 DSO-14 2A, 600V, EMI improved

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1