Opens in a new tab

IRF540NPBF

100V N-ch MOSFET, 33A, 44mΩ Rds, 130W, TO-220AB

58000

Effective Inventory

Image for reference only

Manufacturer Part:

IRF540NPBF

Package:

TO-220AB (3-pin, through-hole, 15.6 x 10.6 x 4.6mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IRF540NPBF is a 100V N-channel power MOSFET from Infineon (formerly International Rectifier) with 33A drain current, 44mΩ RDS(on), and 130W power dissipation in a TO-220AB through-hole package.

Key Specifications

VDS (Drain-Source Voltage) 100V
ID (Continuous Drain Current) 33A @ TC=25°C, 23A @ TC=100°C
RDS(on) (Static On-Resistance) 44mΩ max @ VGS=10V, ID=16A
VGS(th) (Gate Threshold) 2.0V to 4.0V @ ID=250µA
VGS (Gate-Source Voltage) ±20V max
PD (Power Dissipation) 130W @ TC=25°C
Qg (Total Gate Charge) 71nC max @ VDS=80V, VGS=10V
Ciss (Input Capacitance) 1960pF @ VDS=25V, VGS=0V
gfs (Forward Transconductance) 21S typical @ VDS=50V, ID=16A
Body Diode Forward Voltage 1.2V max @ IS=16A
dv/dt (Diode Recovery) 7V/ns max
Switching Times (td(on)/tr/td(off)/tf) 11/35/39/35ns typical
RθJC (Junction-to-Case) 1.15°C/W
Operating Junction Temperature -55°C to +175°C
Package TO-220AB (through-hole)

Features

  • 100V N-channel HEXFET power MOSFET
  • Ultra-low RDS(on) of 44mΩ for high efficiency
  • 33A continuous drain current
  • 130W power dissipation capability
  • Fully avalanche rated
  • Dynamic dv/dt rated
  • Fast switching with low gate charge
  • 175°C maximum junction temperature

Applications

  • DC motor and stepper motor drivers
  • Switching power supplies and converters
  • Load switches and relay replacements
  • Inverter and H-bridge circuits
  • Audio amplifier output stages
Product Introduction: IRF540NPBF Product Introduction

The IRF540NPBF from Infineon Technologies (formerly International Rectifier) is a 100V N-channel power MOSFET utilizing the advanced HEXFET planar cell structure to achieve 44mΩ maximum on-resistance at VGS=10V. The device is rated for 33A continuous drain current at TC=25°C and 130W power dissipation, making it one of the most widely used general-purpose power MOSFETs in the industry. The 2.0V to 4.0V gate threshold makes it compatible with 5V logic-level gate drive, though 10V gate drive is recommended for minimum RDS(on). The device is fully avalanche rated, meaning it can withstand repetitive energy pulses from inductive loads without external clamp circuits. The TO-220AB package provides easy through-hole mounting with heatsink attachment capability. The PBF suffix indicates the lead-free (Pb-free) version.

Working Principle: IRF540NPBF Working Principle

The IRF540NPBF is an enhancement-mode N-channel MOSFET. When VGS exceeds the threshold voltage (2-4V), an inversion layer forms under the gate oxide, creating a conductive channel between drain and source. At VGS=10V, the channel is fully enhanced, and the on-resistance drops to 44mΩ or less. The power dissipation is I²×RDS(on); at 10A, this is only 4.4W (10² × 0.044), allowing significant current without excessive heating. However, at higher currents (20A+), careful thermal management is essential: P = 20² × 0.044 = 17.6W requires a heatsink with RθSA < (175 – Tamb)/17.6 – 1.15°C/W. The body diode (inherent PN junction from source to drain) conducts when VDS goes negative, making the device suitable for half-bridge and H-bridge topologies where freewheeling current flows through the body diode during dead time. The 71nC total gate charge determines the drive power: P_drive = Qg × VGS × f_sw. At 100kHz switching, P_drive = 71nC × 10V × 100kHz = 71mW. The 11ns turn-on delay and 35ns rise time enable switching frequencies up to several hundred kHz in hard-switched applications.

Pin Description: IRF540NPBF Pin Definition and Functions
Pin Name Type Description
1 Gate Input Gate terminal (drive with 5-10V relative to Source)
2 Drain Output Drain terminal (tab is also connected to Drain)
3 Source Power Source terminal (reference for gate drive)

IRF540NPBF follows the standard TO-220-3 MOSFET pinout: Pin 1 = Gate, Pin 2 = Drain (tab), Pin 3 = Source. The metal tab on the back of the package is electrically connected to Drain (Pin 2) and must be electrically isolated from the heatsink when the heatsink is not at drain potential, using a mica or silicone insulator and a shoulder washer. For low-side switching applications (Source to GND), the tab can be directly mounted to a grounded heatsink. The Gate is ESD-sensitive — handle with proper antistatic precautions. Gate charge of 71nC requires adequate gate driver capability for fast switching to minimize transition losses.

Application Scenarios: In which products and applications is IRF540NPBF used
  • DC Motor Driver: Low-side switch with VGS=10V gives 44mΩ; at 10A motor current, conduction loss is only 4.4W
  • H-Bridge: Four IRF540NPBF in full-bridge configuration drive bidirectional DC motors at up to 24V
  • Load Switch: 100V rating allows switching 48V telecom rails; gate pull-down ensures off-state during MCU reset
  • SMPS Switch: 71nC gate charge supports 100kHz+ switching; 130W rating handles flyback/forward converter primary
  • Audio Amplifier: Linear operation with 175°C Tj max; heatsink required for class-AB output stages
Alternative Models: What chips are recommended as replacements for IRF540NPBF
Model Manufacturer Key Difference Package Specs
IRF540NSPBF Infineon Same in D2PAk (TO-263) surface-mount – –
IRF540NLPBF Infineon Same in I2PAK (TO-262) low-profile – –
IRF3205PBF Infineon 55V, 110A, 8mΩ, higher current alternative – –
IRLZ44NPBF Infineon Logic-level gate (VGS=5V for full enhancement) – –
FQP30N06L onsemi 60V, 30A, logic-level, TO-220 – –

IRF540NPBF is a 100V/33A N-channel MOSFET from Infineon in TO-220 with 44mΩ RDS(on). The IRL540N provides logic-level 100V/28A for 5V gate drive. The FQP30N06L provides 60V/30A with 35mΩ and logic-level drive. The IRF640N offers 200V/18A for higher voltage. For surface-mount, IRF540NSPBF provides the same in D2PAK. Complementary P-channel: IRF9540NPBF (-100V/-19A). For synchronous rectification, IRFB4110 offers 100V/180A with 3.7mΩ.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1