Opens in a new tab

IRF540NPBF

100V 33A N-ch MOSFET, 44mΩ, TO-220, HEXFET

58182

Effective Inventory

Image for reference only

Manufacturer Part:

IRF540NPBF

Package:

TO-220AB (15.6 x 10.6 x 4.6mm, through-hole, tab=Drain)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IRF540NPBF from Infineon Technologies is a 100V N-channel HEXFET power MOSFET with 44mΩ on-resistance, 33A continuous drain current, and 130W power dissipation in a TO-220 package — a versatile workhorse for medium-voltage switching applications.

Key Specifications

Type N-Channel Enhancement MOSFET
Drain-Source Voltage (VDSS) 100V
Continuous Drain Current (ID) 33A @ TC=25°C, 23A @ TC=100°C
Pulsed Drain Current (IDM) 110A
On-Resistance (RDS(on)) 44mΩ @ VGS=10V, ID=16A
Gate Threshold Voltage (VGS(th)) 2.0V to 4.0V (3.0V typical)
Forward Transconductance (gfs) 21 S typical
Total Gate Charge (Qg) 71nC typical @ VDS=80V, VGS=10V
Miller Charge (Qgd) 21nC typical
Input Capacitance (Ciss) 1960pF @ VDS=25V
Turn-On Delay Time 11ns typical
Turn-Off Delay Time 39ns typical
Body Diode Forward Voltage (VSD) 1.2V typical @ IF=16A
Reverse Recovery Time (trr) 170ns typical
Avalanche Energy (EAS) 185mJ (single pulse)
Power Dissipation 130W @ TC=25°C
Thermal Resistance (θJC) 1.15°C/W
Operating Temperature -55°C to +175°C
Package TO-220AB (through-hole, tab=Drain)

Features

  • Advanced HEXFET technology with ultra-low RDS(on)
  • 100V drain-source rating for 12V-48V systems
  • Fully avalanche rated
  • Fast switching speed
  • 175°C maximum junction temperature
  • Dynamic dv/dt rating

Applications

  • DC-DC converters
  • Motor drive (H-bridge)
  • Load switching
  • Audio amplifier output stage
  • Solar charge controller
Product Introduction: IRF540NPBF Product Introduction

The IRF540NPBF from Infineon Technologies (formerly International Rectifier) is one of the most widely used N-channel power MOSFETs in the 100V class. With 44mΩ on-resistance at VGS=10V and 33A continuous drain current, it offers an excellent balance of voltage rating, current handling, and low conduction loss. The HEXFET (HEXagonal FET) architecture uses a hexagonal cell layout to maximize the channel width per unit silicon area, achieving low RDS(on) in a compact die. The 100V drain-source rating provides comfortable headroom for 12V, 24V, and 48V systems, where transients and inductive spikes can momentarily exceed the nominal supply. The gate threshold voltage of 2-4V means the device begins to turn on at logic levels but requires 10V for full enhancement (minimum RDS(on)). For 5V logic-level drive, the IRLZ44N (logic-level version) is preferred. The PBF suffix denotes the lead-free (Pb-free) version. The device is fully avalanche rated, meaning it can survive unclamped inductive switching events up to 185mJ without damage.

Working Principle: IRF540NPBF Working Principle

The IRF540NPBF is an N-channel enhancement-mode MOSFET. When VGS exceeds the threshold (2-4V), an inversion layer forms beneath the gate oxide, creating a conductive channel between drain and source. The channel resistance (RDS(on)) decreases as VGS increases: at VGS=4.5V, RDS(on) is typically 70-80mΩ; at VGS=10V, it drops to 44mΩ. For minimum conduction loss, VGS should be 10V or higher. When VGS falls below the threshold, the channel disappears and the MOSFET is OFF, blocking up to 100V between drain and source. The internal body diode (from source to drain) conducts when VDS goes negative, which is useful in half-bridge and H-bridge configurations where the diode carries current during the dead time between switching. However, the body diode is relatively slow (trr=170ns), which can cause losses in high-frequency switching applications. The 71nC total gate charge means the gate driver must supply this charge during turn-on and absorb it during turn-off; a gate driver capable of 1A can switch the MOSFET in approximately 70ns. The turn-on delay (11ns) plus rise time (35ns) give a total turn-on time of ~46ns; turn-off delay (39ns) plus fall time (35ns) give ~74ns turn-off time. For switching frequencies above 100kHz, these transition times contribute significant switching losses, and a MOSFET with lower Qg may be more appropriate.

Pin Description: IRF540NPBF Pin Definition and Functions
Pin Name Type Description
1 Gate Input Gate control terminal. Apply VGS > 4V (10V recommended for lowest RDS(on) of 44mΩ) to fully enhance the MOSFET. Gate charge is 71nC typical. Maximum VGS rating is ±20V. Use a gate resistor (10-47Ω) to control dv/dt and reduce ringing.
2 Drain Power Output Drain terminal connected to the load. Rated for 100V VDS and 33A continuous drain current at TC=25°C. The tab of TO-220 package is electrically connected to Drain. On-resistance is 44mΩ typ at VGS=10V, ID=17A.
3 Source Power Output Source terminal typically connected to ground for low-side switching. Internal body diode has forward voltage VSD ≈ 1.4V and reverse recovery time trr ≈ 340ns. Do not rely on body diode for high-frequency freewheeling.

IRF540NPBF pin assignment (TO-220-3, front view, pins down): Pin 1 (left) = Gate, Pin 2 (center) = Drain/Tab, Pin 3 (right) = Source. The tab is connected to Drain (Pin 2). For high-current applications, mount on heatsink with thermal compound. At ID=20A and VGS=10V, power dissipation can reach 2.5W from RDS(on) alone. For logic-level gate drive (5V), consider IRL540N which is optimized for 5V VGS operation.

Application Scenarios: In which products and applications is IRF540NPBF used
  • Low-Side Switch: Source=GND; Gate from MCU through gate driver (10V); Drain to load; 12V/24V motor, heater, or lamp control
  • H-Bridge Motor: 4× IRF540N; 2 high-side + 2 low-side; 10V gate drive; bidirectional DC motor control
  • Buck Converter: IRF540N as high-side switch; 100kHz max; Schottky freewheel diode; 12V to 5V at 10A
  • Audio Amp: IRF540N in push-pull Class-D output; 100V rating for ±48V rails; gate driver for PWM input
  • Solar Controller: IRF540N as series pass element; PWM controls charge current; 100V rating for 48V battery banks
Alternative Models: What chips are recommended as replacements for IRF540NPBF
Model Manufacturer Key Difference Package Specs
IRLZ44NPBF Infineon Logic-level (VGS=5V for full enhancement), 55V, 47A, TO-220 – –
IRF3205PBF Infineon 8mΩ RDS(on), 55V, 110A, much lower resistance, TO-220 – –
IRF640NPBF Infineon 200V version, 18A, 180mΩ, higher voltage, TO-220 – –
IRF540NS Infineon Same in D2PAK (TO-263) surface-mount – –
FQP30N06L onsemi Logic-level, 60V, 30A, 35mΩ @ 5V, TO-220 – –

IRF540NPBF is a 100V/33A N-channel MOSFET from Infineon in TO-220 with 44mΩ RDS(on). The IRL540N provides logic-level 100V/28A for 5V gate drive. The IRF540ZPBF offers lower 23mΩ in the same package. The FQP30N06L provides 60V/30A with 35mΩ and logic-level drive from onsemi. The IRF640N offers 200V/18A for higher voltage applications. For surface-mount, IRF540NSPBF provides the same in D2PAK. The STD70N02 from ST offers 24V/70A with 7.5mΩ for low-voltage high-current switching.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1