Opens in a new tab

Home » Integrated Circuits ICs, MOSFETs » IRFR5305TRPBF

IRFR5305TRPBF

Infineon P-ch MOSFET, -55V, -31A, 65m ohm RDS(ON), DPAK, avalanche rated

8060

Effective Inventory

Image for reference only

Manufacturer Part:

IRFR5305TRPBF

Package:

DPAK (IRFR suffix, Tab=Drain)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IRFR5305TRPBF from Infineon/IR is a -55V, -31A P-channel enhancement-mode power MOSFET in a DPAK package. With an ultra-low 65m ohm maximum RDS(ON) at VGS=-10V and 50W power dissipation rating, it is designed for high-current load switching, motor drive, and battery management applications requiring efficient high-side control.

Key Specifications

Type P-channel enhancement-mode
Drain-Source Voltage (VDSS) -55V
Continuous Drain Current (ID) -31A (25C, TC)
RDS(ON) 65m ohm max @ VGS=-10V
Gate Threshold (VGS(th)) -2.0V ~ -4.0V
Power Dissipation 50W (25C, TC)
Transconductance 22S typical
Input Capacitance 2800pF typical
Operating Temperature -55C ~ +175C

Features

  • Ultra-low 65m ohm RDS(ON) for minimal conduction losses
  • -31A continuous current rating for high-power loads
  • 50W power dissipation with DPAK thermal pad
  • Fully avalanche rated for rugged inductive switching
  • -55V rating suitable for 48V battery systems

Applications

  • High-side load switching in automotive and industrial systems
  • DC motor drive and direction control
  • Battery management and protection circuits
  • Power tool and UPS inrush current limiting
  • Hot-swap and OR-ing controllers
Product Introduction: IRFR5305TRPBF Product Introduction

The IRFR5305TRPBF from Infineon (formerly International Rectifier) is a -55V, -31A P-channel enhancement-mode power MOSFET in a DPAK surface-mount package. The device features an ultra-low maximum on-resistance of 65m ohm at VGS=-10V, enabling efficient high-side switching with minimal conduction losses even at high load currents. The 50W power dissipation rating (at 25C case temperature) combined with the low thermal resistance of the DPAK package allows effective heat sinking through the PCB copper. The gate threshold voltage range of -2.0V to -4.0V ensures the device can be fully enhanced from 5V logic, though 10V gate drive provides the lowest RDS(ON). The -55V drain-source rating provides adequate margin for 48V battery bus systems including telecommunications (-48V) and automotive (12V/24V/48V) applications. The device is fully avalanche rated, absorbing inductive energy during turn-off without external clamp circuits.

Working Principle: IRFR5305TRPBF Working Principle

The IRFR5305TRPBF operates as a voltage-controlled P-channel switch. When the gate is pulled below the source by more than the threshold voltage (VGS(th) = -2.0V to -4.0V), the MOSFET channel conducts between source and drain. As a P-channel device in the high-side configuration, the source is connected to the positive supply rail, and the gate is pulled to ground (or toward ground) to turn on. The ultra-low 65m ohm RDS(ON) minimizes the voltage drop across the MOSFET during conduction: at 20A, the voltage drop is only 1.3V (20A x 0.065 ohm), and the power dissipation is 26W. The DPAK Tab is connected to the drain, providing a large thermal interface to the PCB for heat removal. During turn-off of inductive loads, the avalanche capability allows the device to absorb the stored energy in the load inductance, clamping the drain voltage until the energy is dissipated in the MOSFET junction.

Pin Description: IRFR5305TRPBF Pin Definition and Functions
Pin Name Function
1 Gate Gate Input
2 Drain Drain (connected to Tab)
3 Source Source Terminal
Tab Drain Drain / Thermal Pad
Application Scenarios: In which products and applications is IRFR5305TRPBF used
  • Automotive high-side switch: Control 12V/24V/48V loads from MCU GPIO with simple gate drive (pull gate to ground to turn on)
  • Motor drive: Implement half-bridge or full-bridge P-channel high-side switches for bidirectional DC motor control
  • Battery management: Disconnect battery from the load during fault conditions with 65m ohm conduction resistance
  • Hot-swap controller: Limit inrush current when plugging in cards or modules, then fully enhance for low-loss operation
  • UPS OR-ing: Combine multiple battery or supply outputs with reverse current blocking through the body diode
Alternative Models: What chips are recommended as replacements for IRFR5305TRPBF
Model Brand VDSS ID RDS(ON)
IRFR5305PBF Infineon -55V -31A 65m ohm
FQP27P06 onsemi -60V -27A 75m ohm
IRF9540N Infineon -100V -23A 117m ohm
AOD4185 AOS -40V -40A 22m ohm
SUD50P06-15L onsemi -60V -50A 15m ohm

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1