Opens in a new tab

ISO3088DWR

20Mbps isolated RS-485 half-duplex, 2.5kVrms, 256 nodes, SOIC-16

5200

Effective Inventory

Image for reference only

Manufacturer Part:

ISO3088DWR

Package:

16-Pin SOIC (10.3 x 7.5 x 2.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO3088DWR is a Texas Instruments 20Mbps half-duplex isolated RS-485/RS-422 transceiver with 2500Vrms isolation. It supports 1/8 unit load (256 nodes), 50kV/us CMTI, fail-safe receiver, and 12kV HBM ESD on bus pins. Packaged in 16-pin SOIC, -40C to +85C.

Key Specifications

Data Rate 20 Mbps
Isolation 2500 Vrms (UL 1577)
Mode Half-duplex
Unit Load 1/8 (256 nodes)
CMTI 50 kV/us typical
ESD (bus to GND2) 12 kV HBM

Features

  • 20Mbps signaling rate
  • 2500Vrms isolation per UL 1577
  • 1/8 unit load, 256 nodes per bus
  • 50kV/us transient immunity
  • Fail-safe receiver (open/short/idle)
  • Thermal shutdown protection
  • 12kV HBM ESD on bus pins
  • 3.3V inputs 5V tolerant

Applications

  • Isolated RS-485 fieldbus
  • Industrial automation networks
  • Security and surveillance systems
  • Long-distance data transmission
Product Introduction: ISO3088DWR Product Introduction

The ISO3088DWR is a Texas Instruments 20Mbps half-duplex isolated RS-485 and RS-422 transceiver providing 2500Vrms galvanic isolation between the bus-side and logic-side circuits. The isolation barrier breaks ground loops, allowing operation with large common-mode voltage differences common in long-distance industrial networks. The 1/8 unit load specification permits up to 256 nodes on a single bus. The 50kV/us typical common-mode transient immunity (CMTI) ensures robust operation in electrically noisy environments near motor drives and power converters. Fail-safe receiver design guarantees a logic-high output when the bus is open, shorted, or idle. The 12kV HBM ESD protection on bus pins and thermal shutdown provide additional fault tolerance. The device meets TIA/EIA RS-485 standards and is VDE, CSA, and UL safety certified. Packaged in 16-pin wide-body SOIC rated for -40C to +85C.

Working Principle: ISO3088DWR Working Principle

The ISO3088 uses capacitive SiO2 isolation technology to separate the bus transceiver from the logic interface. The isolation barrier consists of high-voltage silicon dioxide capacitors that couple digital signals across the barrier while blocking DC and low-frequency common-mode voltages. The driver converts single-ended logic signals (D, DE) into differential RS-485 bus signals (A, B) with controlled slew rate for 20Mbps operation. The receiver converts differential bus signals back to single-ended logic (R). In half-duplex mode, the driver and receiver share the same A/B bus pins, with the driver enable (DE) and receiver enable (RE) controlling direction. The fail-safe receiver biases the inputs so that an idle or open bus produces a logic-high on R, preventing false start bits in UART communication.

Pin Description: ISO3088DWR Pin Definition and Functions
Pin Mnemonic Description
1 VCC1 Logic-side supply (3.3V or 5V)
2,3 D,R Driver input, Receiver output
4 DE Driver enable (active high)
5 RE Receiver enable (active low)
6 GND1 Logic-side ground
7 GND2 Bus-side ground
8 B Bus pin B (inverting)
9 A Bus pin A (non-inverting)
10 VCC2 Bus-side supply (5V)
11-16 NC No connect
Application Scenarios: In which products and applications is ISO3088DWR used
  • Isolated RS-485 Modbus fieldbus in industrial automation with 256-node capacity
  • Long-distance factory communication with 2500Vrms ground loop isolation
  • Security and surveillance camera control with fail-safe receiver
  • Motor drive inverter communication with 50kV/us CMTI noise immunity
Alternative Models: What chips are recommended as replacements for ISO3088DWR
Model Manufacturer Key Difference
ISO3082DWR TI 1Mbps version, slower
ISO3086DW TI Full-duplex, 20Mbps
ADM2587E ADI Similar isolated RS-485
ISL3178E Renesas Non-isolated, 20Mbps

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1