Opens in a new tab

ISO5852SQDWRQ1

Automotive 5.7kVrms reinforced isolated gate driver, 2.5A/5A, DESAT detection, active Miller clamp, AEC-Q100

3093

Effective Inventory

Image for reference only

Manufacturer Part:

ISO5852SQDWRQ1

Package:

16-SOIC (10.3×7.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO5852SQDWRQ1 from Texas Instruments is an automotive-qualified (AEC-Q100) 5.7kVrms reinforced isolated IGBT/MOSFET gate driver with split outputs. It provides 2.5A source and 5A sink peak current with desaturation detection and active Miller clamp, packaged in a 16-pin SOIC with 5700Vrms isolation.

Key Specifications

Isolation Voltage 5700Vrms (reinforced)
Peak Source Current 2.5A
Peak Sink Current 5A
Propagation Delay 76ns (typ)
CMTI 100kV/us (min)
Input Supply 2.25V to 5.5V
Output Supply 15V to 30V
Package 16-SOIC (10.3×7.5mm)
Operating Temperature -40 to +125 C
Qualification AEC-Q100

Features

  • 5.7kVrms reinforced capacitive isolation
  • Split outputs (OUTH/OUTL) for independent control
  • DESAT fault detection with soft turn-off
  • Active Miller clamp (2A) to prevent parasitic turn-on
  • RDY and FLT pins for status monitoring
  • UL 1577, VDE, CQC, TUV certified

Applications

  • HEV/EV power module IGBT/MOSFET driving
  • Industrial motor control drives
  • Solar inverters
  • Induction heating systems
Product Introduction: ISO5852SQDWRQ1 Product Introduction

The ISO5852SQDWRQ1 is an automotive-qualified, reinforced isolated gate driver for IGBTs and MOSFETs with split outputs (OUTH and OUTL). It provides 2.5A source and 5A sink peak current with 5.7kVrms capacitive isolation and 100kV/us CMTI. Built-in desaturation fault detection identifies overcurrent conditions and initiates a soft turn-off procedure. The active Miller clamp prevents parasitic turn-on during high-voltage transients. The device is AEC-Q100 qualified and certified to UL 1577, VDE, CQC, and TUV standards.

Working Principle: ISO5852SQDWRQ1 Working Principle

The ISO5852S-Q1 uses capacitive SiO2 isolation to separate the input CMOS logic from the output power stage. Two complementary CMOS inputs control the output state. The gate drive encoder transmits signals across the isolation barrier, decoded on the output side. The DESAT detection circuit monitors IGBT collector-emitter voltage; when an overcurrent condition is detected, the mute logic blocks the isolator output and initiates a 2us soft turn-off via OUTL. The active Miller clamp provides a low-impedance path for Miller current during off-state. UVLO on both sides ensures gate drive readiness, indicated by the RDY pin.

Pin Description: ISO5852SQDWRQ1 Pin Definition and Functions
Pin Name Function
1 VCC1 Input-side supply
2 IN+ Non-inverting input
3 IN- Inverting input
4 RST Reset input (active low)
5 RDY Ready output
6 FLT Fault output (active low)
7 GND1 Input-side ground
8 VEE2 Output-side negative supply
9-10 GND2 Output-side ground
11 OUTH Gate drive source output
12 OUTL Gate drive sink output
13 CLAMP Active Miller clamp output
14 DESAT Desaturation detection input
15 VCC2 Output-side supply
16 GND1 Input-side ground
Application Scenarios: In which products and applications is ISO5852SQDWRQ1 used
  • HEV/EV traction inverter IGBT/MOSFET gate driving with reinforced isolation
  • Industrial motor drives requiring DESAT protection and fault reporting
  • Solar inverter power stage with active Miller clamp for reliable switching
  • Induction heating systems needing high CMTI and automotive qualification
Alternative Models: What chips are recommended as replacements for ISO5852SQDWRQ1
Model Manufacturer Key Difference
ISO5852SDWR TI Non-automotive version
Si823x Silicon Labs Dual-channel isolated driver
ADuM4135 ADI Isolated IGBT driver, DESAT
UCC21750 TI Isolated SiC/gate driver with UVLO

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1