Opens in a new tab

ISO7742DBQR

Quad-ch 2/2 reinforced digital isolator, 100Mbps, 3000Vrms, 85kV/us CMTI, SSOP-16

5010

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7742DBQR

Package:

SSOP-16 (4.90 x 3.90 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7742DBQR from Texas Instruments is a quad-channel, 2-forward/2-reverse, 100 Mbps reinforced digital isolator in a 16-SSOP (DBQ) package. With 3000 Vrms isolation, 85 kV/µs CMTI, and 10.7 ns propagation delay, it provides robust EMC performance for high-speed isolated communication interfaces.

Key Specifications

Channels 4 (2 forward / 2 reverse)
Data Rate 100 Mbps
Isolation Voltage 3000 Vrms (DBQ), 5000 Vrms (DW)
CMTI 85 kV/µs (min), 100 kV/µs (typ)
Propagation Delay 10.7 ns (typ @ 5V)
Supply Voltage 2.25 V to 5.5 V
Isolation Rating Reinforced (DBQ and DW packages)
Default Output High (no F suffix)
Operating Temperature -55°C to +125°C
Package 16-SSOP (DBQ)

Features

  • 100 Mbps data rate for high-speed SPI and isolated communication
  • 85 kV/µs minimum CMTI for noisy industrial environments
  • 10.7 ns typical propagation delay at 5V supply
  • Reinforced insulation per VDE, CSA, TUV, and CQC
  • Low 1.5 mA per channel at 1 Mbps
  • Enable pins for output high-impedance and power reduction
  • Level translation between 2.25 V and 5.5 V logic domains

Applications

  • Isolated RS-485, RS-232, and CAN bus
  • Motor drive and inverter isolation
  • Solar inverter communication
  • Medical equipment isolation
  • Industrial automation and PLC I/O
Product Introduction: ISO7742DBQR Product Introduction

The ISO7742DBQR from Texas Instruments is a high-performance quad-channel digital isolator with two forward and two reverse channels in a 16-pin SSOP (DBQ) package. The device provides 3000 Vrms isolation with reinforced insulation rating per VDE, CSA, TUV, and CQC standards, 4242 VPK transient isolation, and up to 10 kV surge capability. The 100 Mbps maximum data rate supports high-speed isolated communication protocols including SPI, UART, and isolated RS-485/RS-232. The device achieves 85 kV/µs minimum CMTI and 10.7 ns typical propagation delay at 5V supply, making it suitable for motor drive and inverter applications with high common-mode noise. The capacitive SiO2 double insulation barrier provides long-term reliability with more than 30-year projected lifetime at 1500 Vrms working voltage. Enable pins (EN1/EN2) allow putting outputs in high-impedance for multi-master bus applications and reducing power consumption.

Working Principle: ISO7742DBQR Working Principle

The ISO7742DBQR uses capacitive coupling through a double silicon dioxide (SiO2) insulation barrier to transfer digital signals across the isolation boundary. Each channel consists of an input buffer, a high-frequency modulator, two series isolation capacitors, a demodulator, and an output buffer. The modulator encodes the input logic state into differential pulses that pass through the capacitive barrier. The demodulator on the output side recovers the original logic level. An internal refresh mechanism periodically updates the output state even when the input is static, preventing the output from drifting. If input power is lost, the output defaults to high (non-F suffix) or low (F suffix). The enable pins (EN1, EN2) control the output buffers on each side independently. The robust EMC design includes system-level ESD protection (8 kV IEC 61000-4-2 contact discharge across barrier), EFT immunity, and surge immunity.

Pin Description: ISO7742DBQR Pin Definition and Functions
Pin Name Function
1 VCC1 Side 1 supply (2.25 V to 5.5 V)
2 IN1 Forward channel 1 input
3 IN2 Forward channel 2 input
4 OUT3 Reverse channel 3 output
5 OUT4 Reverse channel 4 output
6 EN1 Side 1 enable (active high)
7-8 GND1 Side 1 ground
9-10 GND2 Side 2 ground
11 EN2 Side 2 enable (active high)
12 IN4 Reverse channel 4 input
13 IN3 Reverse channel 3 input
14 OUT2 Forward channel 2 output
15 OUT1 Forward channel 1 output
16 VCC2 Side 2 supply (2.25 V to 5.5 V)
Application Scenarios: In which products and applications is ISO7742DBQR used
  • Isolated RS-485: Bidirectional data (TX/RX) plus direction control across isolation barrier in industrial RS-485 networks
  • Motor Drive Isolation: Isolating PWM gate drive signals and fault feedback between control MCU and gate driver
  • Solar Inverter: Isolating communication between MPPT controller and grid-side monitoring in solar inverters
  • Medical Equipment: Patient-connected isolation for ECG and EEG front-end communication with processing unit
  • PLC I/O Modules: Isolating digital input and output channels in programmable logic controller modules
Alternative Models: What chips are recommended as replacements for ISO7742DBQR
Model Manufacturer Ch Rate CMTI VISO Notes
ISO7742FDBQR TI 2/2 100 Mbps 85 kV/µs 3000 Vrms Default-low output
ADuM1402BRWZ ADI 2/2 100 Mbps 75 kV/µs 2500 Vrms ADI alternative
Si8642BB-B-IS Silicon Labs 2/2 150 Mbps 75 kV/µs 5000 Vrms Higher speed, SOIC
ISO7242MDWR TI 2/2 150 Mbps 25 kV/µs 2500 Vrms Older generation
CNL4802M onsemi 2/2 25 Mbps 50 kV/µs 5000 Vrms Lower speed

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1