Opens in a new tab

ISO7760FDBQ

6-ch 0/6 reinforced digital isolator, 100Mbps, 3kVrms, default low, SSOP-16

10935

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7760FDBQ

Package:

SSOP-16 (DBQ) (4.9 × 3.9 × 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7760FDBQ from Texas Instruments is a robust EMC, six-channel, 0/6 (all reverse), reinforced digital isolator with default output low (F suffix) in a 16-SSOP package. It provides 100 Mbps data rate, 3000 Vrms isolation voltage, and 85 kV/µs minimum CMTI, ideal for high-reliability industrial and automotive applications.

Key Specifications

  • Channels: 6 (0 forward / 6 reverse)
  • Data Rate: 100 Mbps
  • Propagation Delay: 10.7 ns typ @ 5 V
  • Isolation Voltage: 3000 Vrms (DBQ package)
  • Surge Isolation: 10 kVPK
  • CMTI: 85 kV/µs min, ±100 kV/µs typ
  • Supply: 2.25 V to 5.5 V
  • Default Output: Low (F suffix)
  • Creepage/Clearance: 3.7 mm min
  • Operating Temperature: -55°C to +125°C
  • Package: SSOP-16 (DBQ) (4.9 × 3.9 mm), MSL 2

Features

  • Robust EMC performance (IEC 61000-4-2, ±8 kV contact across barrier)
  • Reinforced isolation per DIN EN IEC 60747-17
  • UL 1577, IEC 61010-1/62368-1/60601-1 certified
  • Low power consumption
  • Enable pins for output high-impedance

Applications

  • Industrial automation I/O isolation
  • Motor drive isolation
  • Isolated SPI/UART communication
  • Medical equipment isolation
  • Power supply feedback isolation
Product Introduction: ISO7760FDBQ Product Introduction

The ISO7760FDBQ from Texas Instruments is a six-channel reinforced digital isolator with all six channels configured in the reverse direction (0 forward / 6 reverse), making it ideal for applications requiring multiple return-path signals across an isolation barrier. The device supports data rates up to 100 Mbps with propagation delay of 10.7 ns typical at 5 V supply. The dual-capacitor SiO2 insulation barrier provides 3000 Vrms isolation voltage (DBQ package) with 10 kVPK surge isolation and 85 kV/µs minimum CMTI. The F suffix indicates default output low state during power-up. Robust EMC performance includes ±8 kV IEC 61000-4-2 contact discharge protection across the isolation barrier. Safety certifications include DIN EN IEC 60747-17, UL 1577, IEC 61010-1, IEC 62368-1, and IEC 60601-1 for industrial and medical applications.

Working Principle: ISO7760FDBQ Working Principle

The ISO7760FDBQ uses Texas Instruments’ capacitive isolation technology with SiO2 dielectric barriers between input and output. Each channel consists of an input modulator, two isolation capacitors, and an output demodulator. Digital signals are modulated into high-frequency pulses, transmitted across the capacitive barrier, and demodulated back to the original logic levels. The dual-capacitor architecture provides differential signal transmission that rejects common-mode transients up to 85 kV/µs minimum. The F suffix version includes a default-low output circuit that holds outputs low when input power is lost. UVLO circuits on both sides ensure defined output states during power-up and power-down transitions. The enable pins can place outputs in high-impedance state for bus sharing or power conservation.

Pin Description: ISO7760FDBQ Pin Definition and Functions
Pin Name Description
1 VCC1 Side 1 Supply (2.25-5.5 V)
2-7 OUT1-OUT6 Output Channels 1-6 (default low)
8 GND1 Side 1 Ground
9 GND2 Side 2 Ground
10-15 IN1-IN6 Input Channels 1-6
16 VCC2 Side 2 Supply (2.25-5.5 V)
Application Scenarios: In which products and applications is ISO7760FDBQ used
  • Industrial I/O Modules: 6-channel return-path isolation for PLC digital input modules with reinforced safety ratings
  • Motor Drive Feedback: Encoder and fault signal isolation from high-voltage inverter stage to control logic
  • Isolated SPI Communication: Reverse-channel data return from isolated ADC/sensor nodes to the host MCU
  • Medical Equipment: IEC 60601-1 compliant isolation for patient-connected monitoring equipment
  • Power Supply Feedback: Reinforced isolation for output voltage/current feedback loops in offline converters
Alternative Models: What chips are recommended as replacements for ISO7760FDBQ
Model Brand Channels Speed (Mbps) Viso (Vrms)
ISO7760DBQ TI 6 (0/6) 100 3000
ISO7761FDBQ TI 6 (1/5) 100 3000
ISO7762FDBQ TI 6 (2/4) 100 3000
ADuM7442 ADI 4 (2/2) 25 2500
Si8626 Silicon Labs 6 (0/6) 150 5000

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1