Opens in a new tab

ISO7762FQDBQQ1

Automotive 6-ch digital isolator, 5kVrms, 150Mbps, 12uA/ch, SOIC-16

8900

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7762FQDBQQ1

Package:

16-Pin SOIC Wide Body (7.5 x 10.3 x 2.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7762FQDBQQ1 is a Texas Instruments AEC-Q100 qualified automotive-grade 6-channel digital isolator with 5000Vrms isolation. It provides 5 forward and 1 reverse (5/1) channels, 150Mbps data rate, and ultra-low 12uA per channel quiescent current. Packaged in 16-pin SOIC wide body, -40C to +125C.

Key Specifications

Channels 6 (5 forward, 1 reverse)
Isolation 5000 Vrms
Data Rate 150 Mbps
Propagation Delay 12 ns typical
IQ per channel 12 uA typical
CMTI +/-75 kV/us

Features

  • AEC-Q100 Grade 1 qualified
  • 6 channels: 5 forward, 1 reverse
  • 5000Vrms isolation rating
  • 150Mbps data rate per channel
  • 12uA per channel quiescent current
  • +/-75kV/us CMTI
  • 12ns propagation delay
  • Automotive -40C to +125C

Applications

  • Automotive EV inverter isolation
  • Industrial motor drive gate drivers
  • Isolated SPI communication
  • EV battery management systems
Product Introduction: ISO7762FQDBQQ1 Product Introduction

The ISO7762FQDBQQ1 is a Texas Instruments AEC-Q100 Grade 1 qualified automotive-grade 6-channel digital isolator providing 5000Vrms galvanic isolation. The 5/1 channel directionality (5 forward, 1 reverse) is optimized for isolated SPI applications where clock and data flow in one direction and chip select or fault feedback returns in the opposite direction. The 150Mbps data rate supports high-speed digital communication. The 12uA per channel quiescent current is among the lowest in the industry, minimizing power dissipation in multi-isolator systems. The +/-75kV/us common-mode transient immunity (CMTI) ensures reliable operation in noisy motor drive and EV inverter environments. Propagation delay is 12 ns typical with 2.5 ns channel-to-channel skew. Packaged in 16-pin SOIC wide body rated for -40C to +125C.

Working Principle: ISO7762FQDBQQ1 Working Principle

The ISO7762 uses TI’s capacitive SiO2 isolation technology. Each channel consists of a high-voltage silicon dioxide capacitor barrier between two dies. The input die modulates the digital signal into high-frequency pulses that cross the capacitive barrier. The output die demodulates the pulses back to the original digital level. The single-ended capacitor topology with differential sensing provides high CMTI of +/-75kV/us. The 5 forward channels pass signals from side 1 to side 2, while the 1 reverse channel passes a signal from side 2 to side 1. The default output state (high or low) when input power is lost is determined by the F suffix (failsafe high). The low 12uA per channel IQ is achieved through an efficient modulation scheme and CMOS circuit design.

Pin Description: ISO7762FQDBQQ1 Pin Definition and Functions
Pin Mnemonic Description
1 VCC1 Side 1 supply (2.25-5.5V)
2-6 IN1-IN5 Forward channel inputs
7,8 GND1,OUT6 GND1, reverse output
9 GND2 Side 2 ground
10 IN6 Reverse channel input
11-15 OUT5-OUT1 Forward channel outputs
16 VCC2 Side 2 supply
Application Scenarios: In which products and applications is ISO7762FQDBQQ1 used
  • Automotive EV inverter isolated SPI with 5 data/clock channels and 1 fault feedback
  • Industrial motor drive gate driver isolation with 75kV/us CMTI
  • EV BMS cell monitoring with 5kVrms isolation and 12uA power
  • Isolated CAN/LIN communication in automotive power train systems
Alternative Models: What chips are recommended as replacements for ISO7762FQDBQQ1
Model Manufacturer Key Difference
ISO7762DWR TI Non-automotive, SOIC-16
ISO7763FDW TI Triple channel, 3/0
ADuM346 ADI Similar 6-ch, iCoupler
Si8660 Silicon Labs Similar 6-ch isolator

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1