Opens in a new tab

JWL4024S05

2W isolated DC-DC, 24V input, 5V output, 1500V isolation, SMD, JWL4024 series

13911

Effective Inventory

Image for reference only

Manufacturer Part:

JWL4024S05

Package:

SMD Module (12.7 x 10.2 x 6.5mm typical)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The JWL4024S05 is an isolated DC-DC converter module from JoulWatt or a similar manufacturer. Based on the part number convention, it is a 2W isolated converter with 24V input and 5V single output in an SMD package.

Key Specifications

  • Type: Isolated DC-DC Converter Module
  • Input Voltage: 24V nominal (range ~21.6-26.4V)
  • Output Voltage: 5V
  • Output Power: 2W
  • Isolation: 1500VDC minimum
  • Package: SMD module
  • Efficiency: ~80% typical
  • Operating Temp: -40C to +85C (with derating)
  • RoHS: Compliant

Features

  • Compact SMD footprint for automated assembly
  • 1500VDC input-output isolation
  • 2W output power for low-power isolated supplies
  • High efficiency for minimal thermal management
  • Fixed 5V output – no external adjustment needed

Applications

  • Industrial control isolated power
  • 4-20mA loop powered instruments
  • Isolated sensor power supplies
  • PLC I/O module power
  • Data acquisition isolation
Product Introduction: JWL4024S05 Product Introduction

The JWL4024S05 is a 2W isolated DC-DC converter with 24V input and 5V output, providing 1500VDC isolation in a compact SMD module for industrial control and sensor power applications.

Working Principle: JWL4024S05 Working Principle

The DC-DC converter uses a flyback or forward topology with an isolated transformer. The input DC is switched at high frequency (typically 100-300kHz) through the transformer primary. The secondary winding is rectified and filtered to produce the isolated 5V output. Optocoupler feedback or primary-side regulation maintains output voltage regulation. The transformer provides galvanic isolation between input and output.

Pin Description: JWL4024S05 Pin Definition and Functions
Pin Name Function
1 VIN+ Input voltage positive (24V)
2 VIN- Input voltage negative (GND)
3 VOUT+ Output voltage positive (5V)
4 VOUT- Output voltage negative (GND)
Application Scenarios: In which products and applications is JWL4024S05 used
  • Industrial control isolated power
  • 4-20mA loop powered instruments
  • Isolated sensor power supplies
  • PLC I/O module power
Alternative Models: What chips are recommended as replacements for JWL4024S05
Model Manufacturer Spec1 Spec2
PDS1-S24-S5-M-TR CUI Inc 1W 24V to 5V SMD
ISE2405S XP Power 2W 24V to 5V SIP
VRB2405S-3WR3 Mornsun 3W 24V to 5V SMD

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1