Opens in a new tab

KSZ8081RNBIA

10/100 Ethernet PHY, RMII/MII, HP Auto-MDIX, EtherCAT, 32-QFN(5×5), -40~85°C

9200

Effective Inventory

Image for reference only

Manufacturer Part:

KSZ8081RNBIA

Package:

32-QFN (5x5mm), Exposed Pad

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The KSZ8081RNBIA is a single-port 10/100 Ethernet PHY transceiver from Microchip with RMII v1.2 MAC interface. It integrates on-chip termination resistors, a 1.2V core regulator, and HP Auto-MDIX for automatic crossover cable detection. The industrial-grade (-40 to +85C) variant is in a 32-pin QFN (5x5mm) package with EtherCAT support.

Key Specifications

Device Type 10/100 Ethernet PHY Transceiver
Line Speed 10/100Mbps (10BASE-T, 100BASE-TX)
MAC Interface MII / RMII v1.2
Auto-MDIX HP Auto-MDI/MDI-X
EtherCAT Support Yes
On-Chip Termination Yes (differential pairs)
Integrated Regulator 1.2V core (single 3.3V supply)
LinkMD Cable Diagnostics Yes (TDR-based)
Supply Voltage 3.3V
Digital I/O Voltage 1.8V / 2.5V / 3.3V
Package 32-QFN (5x5mm, EP)
Operating Temperature -40°C to +85°C

Features

  • Single-chip 10BASE-T/100BASE-TX IEEE 802.3 transceiver
  • RMII v1.2 with 50MHz reference clock output to MAC
  • HP Auto-MDI/MDI-X eliminates crossover cable concerns
  • On-chip termination resistors reduce BOM cost
  • LinkMD TDR cable diagnostics
  • EtherCAT fieldbus support
  • Baseline wander correction
  • Programmable interrupt and LED outputs

Applications

  • Industrial Ethernet and EtherCAT slaves
  • IP cameras and NVRs
  • Printers and multifunction peripherals
  • Game consoles and set-top boxes
  • Embedded Ethernet for MCU/SoC
Product Introduction: KSZ8081RNBIA Product Introduction

The KSZ8081RNBIA is a single-port 10/100Mbps Ethernet PHY transceiver from Microchip with RMII v1.2 and MII MAC-side interface support. It integrates on-chip termination resistors for the differential pairs and a low-noise 1.2V core regulator, enabling single 3.3V supply operation and reduced BOM cost. HP Auto-MDI/MDI-X automatically detects and corrects straight-through and crossover cable connections. LinkMD TDR-based cable diagnostics identify faulty copper cabling. The industrial-grade device in 32-pin QFN (5x5mm) supports EtherCAT fieldbus applications.

Working Principle: KSZ8081RNBIA Working Principle

The KSZ8081 implements 10BASE-T and 100BASE-TX physical layers. For 100BASE-TX, it performs 4B5B encoding/decoding, MLT-3 signaling, and digital adaptive equalization with echo cancellation. For 10BASE-T, Manchester encoding is used. The RMII interface transfers data to the MAC using 2-bit wide TXD/RXD buses at 50MHz reference clock. The 25MHz crystal input is multiplied internally to generate the 50MHz RMII clock output. Auto-negotiation determines the best speed and duplex with the link partner. HP Auto-MDIX detects and corrects MDI/MDI-X polarity, eliminating the need for specific cable types. LinkMD uses TDR to measure distance to cable faults.

Pin Description: KSZ8081RNBIA Pin Definition and Functions
Interface Signals Function
RMII/MII TXD[3:0], RXD[3:0], TXEN, RXDV, REF_CLK MAC data interface
MDIO/MDC 2 pins Management interface
Line Side TXP/TXN, RXP/RXN Twisted-pair signals
Crystal XTAL1/XTAL2 25MHz reference
Application Scenarios: In which products and applications is KSZ8081RNBIA used
  • Industrial EtherCAT slave PHY interface
  • IP camera and NVR 10/100 Ethernet port
  • Printer and MFP embedded LAN
  • Game console and set-top box Ethernet
  • General embedded MCU/SoC Ethernet PHY
Alternative Models: What chips are recommended as replacements for KSZ8081RNBIA
Manufacturer Part Number Speed Notes
Microchip LAN8742A-CZ-TR 10/100 RMII, WoL, 24-QFN
Realtek RTL8201F-CG 10/100 RMII PHY, lower cost
TI DP83848CVV 10/100 MII/RMII, 48-LQFP

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1