Opens in a new tab

KSZ8863RLL

3-port 10/100 managed Ethernet switch, 2x PHY + RMII, QoS/VLAN/RSTP, 48-LQFP

2500

Effective Inventory

Image for reference only

Manufacturer Part:

KSZ8863RLL

Package:

48-LQFP (7x7mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The KSZ8863RLL from Microchip Technology is a 3-port 10/100 managed Ethernet switch IC with two integrated 10/100BASE-T/TX PHY transceivers and one RMII MAC interface. It features QoS packet prioritization, per-port power management, and Rapid Spanning Tree Protocol support in a 48-pin LQFP package.

Key Specifications

  • Port Configuration: 2x 10/100BASE-T/TX PHY + 1x RMII MAC interface
  • Switching: 3-port managed switch
  • Speed: 10/100 Mbps
  • MAC Interface: RMII (Reduced MII)
  • Management: SPI / I2C / SMI (MDC/MDIO)
  • QoS: 4 priority queues, IPv6 classification
  • RSTP: Rapid Spanning Tree Protocol support
  • VLAN: Port-based and 802.1Q tag-based
  • MIB: RMON and MIB counters per port
  • Rate Limiting: Per-port ingress and egress
  • Power Management: Software power-down, per-port power-down, energy detect mode
  • Bypass Mode: Keeps switching alive when host sleeps
  • Internal LDO: Yes (single 3.3V supply)
  • I/O Voltages: 1.8V, 2.5V, 3.3V
  • Cable Diagnostics: LinkMD (TDR-based)
  • Operating Temperature: -40°C ~ 85°C (industrial)
  • Package: 48-LQFP (7x7mm)

Features

  • Fully integrated 3-port switch with 2 PHYs and RMII uplink
  • Managed switch features: QoS, VLAN, RSTP, rate limiting
  • IPv6 priority classification support
  • Internal LDO for single 3.3V supply operation
  • Energy detect mode for green power savings
  • Bypass mode for host processor sleep
  • LinkMD cable diagnostics
  • Comprehensive MIB counters for network monitoring

Applications

  • VoIP phones and IP-PBX
  • Industrial Ethernet switches
  • Set-top boxes and IPTV
  • Residential gateways
  • Automotive Ethernet
Product Introduction: KSZ8863RLL Product Introduction

The KSZ8863RLL from Microchip Technology is a highly integrated 3-port managed Ethernet switch IC. The RLL variant provides two copper 10/100BASE-T/TX PHY ports and one RMII host-side MAC interface, making it ideal for adding Ethernet switching capability to a processor-based system. The managed switch features include QoS with 4 priority queues and IPv6 classification, 802.1Q VLAN support, Rapid Spanning Tree Protocol (RSTP), and per-port rate limiting — features typically found only in larger enterprise switches. The internal LDO allows operation from a single 3.3V supply. The energy detect mode automatically powers down idle PHY ports, and the bypass mode maintains switch operation when the host processor is in sleep mode, reducing overall system power consumption.

Working Principle: KSZ8863RLL Working Principle

The KSZ8863RLL integrates three switch ports connected through an internal non-blocking switch fabric with shared packet buffer memory. The two copper PHY ports include 10/100BASE-T/TX transceivers with integrated MDI termination resistors and auto-MDIX crossover capability. The RMII port connects to the host processor’s MAC through a reduced-pin-count MII interface at 50MHz (100Mbps) or 5MHz (10Mbps). Incoming packets are stored in the shared buffer, classified by the QoS engine (based on 802.1p, DSCP, or IPv6 priority), and forwarded to the destination port(s) based on the MAC address table (self-learning with up to 1K entries). The management interface (SPI, I2C, or SMI) allows the host to configure VLANs, QoS policies, RSTP parameters, and read MIB counters. The internal LDO generates the 1.2V core supply from the 3.3V input, simplifying the power supply design.

Pin Description: KSZ8863RLL Pin Definition and Functions
Pin Group Function
RMII Interface TXD[1:0], RXD[1:0], TXEN, CRS_DV, REF_CLK, RXER
PHY Port 1/2 MDI TXP/N, RXP/N (4 differential pairs to magnetics)
Management SPI/I2C/SMI config interface
LED Per-port LED indicators (link/activity/speed)
Control RESET#, STRAP config pins
Power VDD (3.3V), VDDIO (1.8/2.5/3.3V), GND
Application Scenarios: In which products and applications is KSZ8863RLL used

The KSZ8863RLL is used in VoIP desk phones where the two copper ports daisy-chain the PC connection through the phone, and the RMII port connects to the VoIP processor. In industrial Ethernet, the managed features (RSTP, VLAN, QoS) enable deterministic communication for factory automation. For set-top boxes, the switch provides one port for the WAN uplink and one for the home network, with the RMII connecting to the SoC. The bypass mode allows the processor to sleep while the switch continues forwarding packets between the two copper ports, saving power in always-on applications.

Alternative Models: What chips are recommended as replacements for KSZ8863RLL
Model Manufacturer Key Difference
KSZ8863MLL Microchip MII interface instead of RMII
KSZ8863FLL Microchip 1x 100BASE-FX + 1x Copper + MII
KSZ8895MQXIA Microchip 5-port 10/100 switch, QFN-128

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1