Opens in a new tab

L6203

DMOS full-bridge motor driver, 52V 5A, MULTIWATT-11

3556

Effective Inventory

Image for reference only

Manufacturer Part:

L6203

Package:

MULTIWATT-11 (20×9.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The L6203 from ST is a DMOS full-bridge motor driver with 52V 5A rating, PWM current control, and over-temperature protection in MULTIWATT-11 for DC and stepper motor driving.

Key Specifications

Package MULTIWATT-11 (20×9.4mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: L6203 Product Introduction

The L6203 from ST is a DMOS full-bridge motor driver with 52V 5A rating, PWM current control, and over-temperature protection in MULTIWATT-11 for DC and stepper motor driving.

Working Principle: L6203 Working Principle

The L6203 is a DMOS full-bridge motor driver from ST in MULTIWATT-11, rated at 52V and 5A continuous (peak 5A). It integrates four N-channel DMOS power transistors in an H-bridge configuration, driven by internal charge-pump gate drivers. The charge pump (VCP pin with external capacitor) generates a voltage above VS to drive the high-side N-channel MOSFET gates, enabling 100% duty cycle operation. The IN1 and IN2 inputs control the bridge state: IN1=H/IN2=L drives current from OUT1 to OUT2; IN1=L/IN2=H reverses; IN1=IN2 drives both low (fast decay brake). PWM speed control is achieved by alternating between drive and brake states at 20-30kHz. The SENSE1 pin provides a current-sense output proportional to the bridge 1 current (ratio 1:4000 typical), enabling external current-limit circuitry. The RDS(on) of each MOSFET is 0.3Ohm typical, giving 0.6Ohm total bridge resistance. The EN pin enables/disables all outputs. Thermal shutdown at 150C protects the die. The MULTIWATT-11 package with exposed tab provides 2C/W thermal resistance on a heatsink, essential for dissipating the 15W conduction loss at 5A. The device supports step-direction driving for stepper motors when two L6203 are used (one per phase).

Pin Description: L6203 Pin Definition and Functions
Pin Name Type Function
1 OUT1 Output Bridge output 1 (connects to motor terminal A)
2 SENSE1 Output Bridge 1 current sense (connect to sense resistor)
3 GND Power Ground
4 IN1 Input Bridge 1 logic input
5 EN Input Enable (active high)
6 IN2 Input Bridge 2 logic input
7 VCP Analog Charge pump output (bootstrap cap for high-side drive)
8 VREF Analog Internal reference (connect 100nF to GND)
9 VDD Power Logic supply (5V, connect 100nF to GND)
10 GND Power Ground
11 OUT2 Output Bridge output 2 (connects to motor terminal B)
Application Scenarios: In which products and applications is L6203 used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for L6203
    Manufacturer Part Number Package Notes
    STMicroelectronics L6205PD PowerDIP-24 Dual full-bridge, 2.8A per bridge
    Texas Instruments DRV8801PWPR HTSSOP-16 2.8A brushless DC motor driver
    Allegro A4954KJPTR-T TSSOP-16 Full-bridge, 3.5A, automotive
    Infineon BTN8982TA TO-263-7 Half-bridge, 55V 30A (x2 for H-bridge)
    onsemi NCV5421DR2G SOIC-16 Brushless DC motor pre-driver

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1