Opens in a new tab

L78L08ACZ

100mA LDO, 8V fixed, TO-92

11400

Effective Inventory

Image for reference only

Manufacturer Part:

L78L08ACZ

Package:

TO-92 (5.20 x 4.20 mm, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

L78L08ACZ Overview

The L78L08ACZ is a positive voltage linear regulator from STMicroelectronics with fixed 8V output, maximum 100mA output current, in a TO-92 through-hole package, suitable for low-power analog circuit power supply.

Key Features

  • Fixed output voltage: 8V
  • Maximum output current: 100mA
  • Maximum input voltage: 30V
  • Dropout voltage: 1.7V
  • Line regulation: 200mV
  • Load regulation: 100mV
Product Introduction: L78L08ACZ Product Introduction

The L78L08ACZ is a 100 mA positive voltage regulator from STMicroelectronics in a TO-92 through-hole package, providing a fixed 8 V output with 4 percent tolerance over the 0 C to 125 C temperature range. It features internal current limiting and thermal shutdown for robustness, requires no external components, and operates from an input voltage of 10 V to 30 V. With a quiescent current of 3 mA typical and output noise voltage of 40 uV typical, it serves as a compact and reliable local regulation solution for low-current analog and logic circuits.

Working Principle: L78L08ACZ Working Principle

The L78L08ACZ is a series-pass linear voltage regulator that maintains a constant 8 V output by continuously adjusting the conduction of an internal series pass transistor. A bandgap voltage reference generates a stable internal reference voltage, which is compared against a divided-down sample of the output voltage by an error amplifier. The error amplifier drives the base of the series pass transistor to maintain the output at the regulation setpoint. If the output current exceeds the internal limit (typically 140 mA), the current limit circuit reduces the drive to the pass transistor, preventing damage. If the junction temperature exceeds approximately 150 C, the thermal shutdown circuit turns off the pass transistor until the device cools below the recovery threshold. The dropout voltage is approximately 1.7 V at full load (100 mA), meaning the input must be at least 9.7 V to maintain 8 V regulation. A small bypass capacitor (0.33 uF) on the input is recommended when the regulator is located far from the supply filter, and a 0.01 uF output capacitor improves transient response.

Pin Description: L78L08ACZ Pin Definition and Functions
Pin Name Description
1 OUT Regulated 8 V output; connect 0.01 uF capacitor to GND for stability
2 GND Ground reference
3 IN Unregulated input voltage (10 V to 30 V); connect 0.33 uF capacitor to GND if far from source

Package: TO-92 (3-pin, flat face). Dimensions: 4.58 x 3.86 mm body. The A suffix denotes 4% output voltage tolerance. The C suffix denotes 0 to 125 C operating temperature range. The Z suffix denotes TO-92 package.

Application Scenarios: In which products and applications is L78L08ACZ used
  • Local Board Regulation: Providing a stable 8 V rail from a 12 V or 15 V supply for analog circuits and op-amp power
  • Zener Replacement: Replacing Zener diode-resistor combinations with better regulation and lower noise
  • Logic Supply: Powering 8 V logic families and relay driver circuits from unregulated DC sources
  • Sensor Biasing: Stable reference voltage supply for resistive sensor bridges and transducer excitation
  • Prototype and Hobby Projects: Simple through-hole 8 V regulator for breadboard and educational circuits
Alternative Models: What chips are recommended as replacements for L78L08ACZ
Model Manufacturer Vout Iout Tolerance Package
78L08ACZ onsemi 8 V 100 mA 4% TO-92
MC78L08ACPG onsemi 8 V 100 mA 4% TO-92
L78L08ABD13TR STMicroelectronics 8 V 100 mA 4% SO-8
L78L08ABUTR STMicroelectronics 8 V 100 mA 4% SOT-89
LM2931AZ-8.0 Texas Instruments 8 V 100 mA 4% TO-92

L78L08ACZ is an 8V/100mA positive voltage regulator from ST in TO-92-3 with ±4% tolerance. The MC78L08ACDR2G from onsemi is the SOIC-8 surface-mount equivalent. LM78L08ACZ from TI provides the same function with ±4% A-grade tolerance. For adjustable 100mA output, LM317LZ offers 1.25-37V in the same TO-92 package. For higher current, LM7808CT provides 1A in TO-220. For low-dropout, TLV70008 provides 300mA LDO in SOT-23-5.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1