Opens in a new tab

LAN8710AI-EZK

10/100 Ethernet PHY transceiver, MII/RMII, Auto-MDIX, EEE, QFN-32

5800

Effective Inventory

Image for reference only

Manufacturer Part:

LAN8710AI-EZK

Package:

32-QFN (5.00 x 5.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LAN8710AI-EZK is a Microchip (formerly SMSC) low-power 10BASE-T/100BASE-TX physical layer transceiver with variable I/O voltage, compliant with IEEE 802.3-2005. It supports MII and RMII MAC interfaces, HP Auto-MDIX, auto-negotiation, and flexPWR technology for flexible power management. The industrial-grade version operates from -40°C to +85°C in a 32-pin QFN (5×5 mm) package.

Key Specifications

Standards IEEE 802.3/802.3u
Data Rate 10/100 Mbps
MAC Interface MII / RMII
I/O Voltage 1.6 V to 3.6 V
Auto-MDIX HP Auto-MDIX
Package 32-Pin QFN (5×5)

Features

  • Single-chip 10/100 Ethernet PHY
  • MII and RMII interface support
  • HP Auto-MDIX for cable polarity detection
  • flexPWR technology: 1.6V to 3.6V variable I/O
  • Integrated 1.2V regulator with disable
  • Auto-negotiation and polarity correction
  • Low-power modes with wake-up detection
  • Two status LED outputs

Applications

  • Embedded Ethernet connectivity
  • Set-top boxes and digital TVs
  • Industrial automation networking
  • IoT gateway and router platforms
Product Introduction: LAN8710AI-EZK Product Introduction

The Microchip LAN8710AI-EZK is a single-chip 10/100 Ethernet physical layer transceiver (PHY) supporting both MII and RMII MAC interfaces with HP Auto-MDIX and Energy Efficient Ethernet (EEE). The device integrates the complete PHY layer including 100BASE-TX transmitter and receiver, 10BASE-T transmitter and receiver, auto-negotiation, and HP Auto-MDIX—which automatically detects and corrects for crossover and straight-through cable configurations, eliminating a common installation error. The flexPWR technology supports variable I/O voltages from 1.6V to 3.6V on the digital interface pins, enabling direct connection to 1.8V, 2.5V, or 3.3V MACs without voltage translation. An integrated 1.2V regulator with disable feature allows operation from a single 3.3V supply, simplifying the power tree. The RMII interface reduces the MAC-to-PHY pin count from 16 (MII) to 7, saving valuable MCU/MPU I/O pins. The industrial temperature range (-40C to +85C) supports factory automation, building control, and outdoor networking applications. Power consumption is minimized through multiple low-power modes including EEE (IEEE 802.3az) which reduces power during periods of low data activity. Two LED outputs provide link status and activity indication.

Working Principle: LAN8710AI-EZK Working Principle

The LAN8710AI implements the IEEE 802.3/802.3u physical layer for 10BASE-T and 100BASE-TX Ethernet. In 100BASE-TX mode, the transmitter takes 4-bit nibbles from the MII/RMII interface, performs 4B/5B encoding, scrambles the data, and drives the MLT-3 encoded signal onto the twisted pair through the external magnetics and RJ45 connector. The receiver performs the inverse: MLT-3 decoding, descrambling, 5B/4B decoding, and delivers the data to the MAC via MII/RMII. In 10BASE-T mode, Manchester encoding/decoding is used instead. Auto-negotiation determines the highest common speed and duplex mode between the local and remote PHY by exchanging link pulse sequences. HP Auto-MDIX automatically swaps the transmit and receive pairs to accommodate either straight-through or crossover cables by detecting the signal polarity on the receive pairs during link establishment. The EEE feature enters a low-power idle (LPI) state during periods of no data transmission, waking up periodically to refresh the link state—reducing power consumption by up to 40% compared to continuous active operation. The SMI (Station Management Interface) provides read/write access to the 32 internal management registers for configuration and status monitoring.

Pin Description: LAN8710AI-EZK Pin Definition and Functions
Pin Mnemonic Description
1-2 TXP/TXN Differential transmit output to magnetics
3-4 RXP/RXN Differential receive input from magnetics
5 VDDCR Internal 1.2V regulator output (decoupling cap)
6 CLKIN External 25MHz reference clock input
7 MDIO Management data I/O (SMI)
8 MDC Management clock input (SMI)
9-16 MII/RMII MAC interface signals (TXD, RXD, TXEN, RXER, CRS, etc.)
17 INT Interrupt output (active low)
18 NINT/FX Configurable interrupt or fiber mode select
19-20 LED1/LED2 Link/activity LED outputs
21-32 VDD/GND Power and ground (3.3V analog and 1.8-3.3V digital)
Application Scenarios: In which products and applications is LAN8710AI-EZK used
  • Industrial PLC Ethernet port with RMII interface to ARM Cortex-M MPU, 3.3V single supply, and EEE for power savings
  • Building automation HVAC controller with Auto-MDIX eliminating cable polarity errors during field installation
  • IP camera with 100Mbps PHY feeding H.264 compressed video through RMII to SoC with 1.8V I/O Smart home gateway dual-Ethernet WAN/LAN design using two LAN8710AI devices on a single RMII bus
Alternative Models: What chips are recommended as replacements for LAN8710AI-EZK
Model Manufacturer Key Difference
LAN8720AI Microchip RMII only, smaller QFN-24, lower cost
DP83848JVVB TI 10/100 PHY, MII/RMII, larger LQFP-48
KSZ8041NLIA Microchip 10/100 PHY, RMII, QFN-24
RTL8201F-VB-CG Realtek 10/100 PHY, MII/RMII, LQFP-48

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1