Opens in a new tab

LAN9252TI/ML

2-port EtherCAT Slave Controller, integrated PHY, SPI/Parallel, 64-QFN, -40~85°C

3200

Effective Inventory

Image for reference only

Manufacturer Part:

LAN9252TI/ML

Package:

64-QFN (9x9mm), Exposed Pad

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LAN9252TI/ML is a 2-port EtherCAT Slave Controller (ESC) from Microchip with integrated FIFOs and DMA, designed for real-time industrial Ethernet communication. It supports distributed clocks, FMMU mapping, and DC sync in a 64-pin QFN package.

Key Specifications

Device Type EtherCAT Slave Controller (ESC)
Ports 2 (EtherCAT ports)
PHY Integration 2 integrated 10/100 PHYs
Distributed Clocks Yes
FMMU Yes (flexible mapping)
SyncManager Yes
Process Data RAM On-chip
Host Interface SPI, Parallel (8/16-bit), I2C
Supply Voltage 3.3V (with 1.2V core)
Package 64-QFN (9x9mm)
Operating Temperature -40°C to +85°C

Features

  • 2-port EtherCAT slave with integrated PHYs
  • Distributed clocks for precise synchronization
  • Flexible FMMU mapping for bit/byte/word access
  • Multiple host interfaces (SPI, parallel, I2C)
  • Integrated FIFOs and DMA
  • On-chip process data memory
  • SyncManager for synchronized data exchange

Applications

  • Industrial automation EtherCAT slaves
  • Servo drive and motor controllers
  • IO modules and fieldbus gateways
  • Robotics and motion control
  • Process control and instrumentation
Product Introduction: LAN9252TI/ML Product Introduction

The LAN9252TI/ML is a 2-port EtherCAT Slave Controller (ESC) from Microchip with two integrated 10/100Mbps Ethernet PHYs, designed for real-time industrial Ethernet communication in EtherCAT networks. It supports distributed clocks for sub-microsecond synchronization, FMMU (Fieldbus Memory Management Unit) for flexible logical-to-physical address mapping, and SyncManager for synchronized data exchange. Multiple host interfaces (SPI, 8/16-bit parallel, I2C) connect to any local MCU/MPU. The 64-pin QFN (9x9mm) package with industrial temperature range suits demanding factory automation environments.

Working Principle: LAN9252TI/ML Working Principle

The LAN9252 implements the EtherCAT slave protocol at the hardware level. Incoming EtherCAT frames are processed on-the-fly by the processing unit: the frame header is read, FMMU mappings translate logical addresses to physical process data RAM locations, and data is read or written without buffering the entire frame. Distributed clocks synchronize the local clock with the master’s reference clock for precise timing of input/output sampling. The SyncManager controls the handshake between the EtherCAT master and the local application, ensuring consistent data access. Integrated PHYs handle 100BASE-TX physical layer encoding/decoding, eliminating external PHY components.

Pin Description: LAN9252TI/ML Pin Definition and Functions
Interface Signals Function
EtherCAT Port 0/1 TXP/TXN, RXP/RXN Integrated PHY line side
SPI Host MOSI/MISO/SCK/CS, IRQ Host MCU interface
Parallel Host DATA[15:0], ADDR[3:0] 16-bit parallel MCU interface
MDIO/MDC 2 pins PHY management
Application Scenarios: In which products and applications is LAN9252TI/ML used
  • Industrial PLC and servo drive EtherCAT slave
  • Motor controller and motion control node
  • Distributed IO module for factory automation
  • Robotics joint controller EtherCAT interface
  • Process control instrumentation EtherCAT port
Alternative Models: What chips are recommended as replacements for LAN9252TI/ML
Manufacturer Part Number Ports Notes
Microchip LAN9253I/ML 3 3-port ESC variant
Beckhoff ET1100 4 Original 4-port ESC
Microchip LAN9250I/ML 2 Reduced feature ESC

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1