Opens in a new tab

LAN9252TI/ML

2-port EtherCAT slave controller with 10/100 PHY, SPI/SQI, 64-QFN

4817

Effective Inventory

Image for reference only

Manufacturer Part:

LAN9252TI/ML

Package:

64-QFN (9×9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Microchip LAN9252TI/ML is a 2-port EtherCAT slave controller with integrated 10/100 Ethernet PHY in a 64-pin QFN (9×9 mm) package. It supports SPI/SQI and MII interfaces for host communication, and provides 16 configurable digital I/O pins for EtherCAT Digital I/O mode. The device operates from 1.8V to 3.3V with built-in JTAG and I2C interfaces for configuration. Supporting IEEE 802.3 and IEEE 802.3u standards with full/half duplex operation, it is rated for the industrial temperature range of -40°C to +85°C.

Key Specifications

Ethernet Standard IEEE 802.3/802.3u (10/100 Base-T/TX)
EtherCAT Ports 2 (for daisy-chain topology)
Host Interface SPI/SQI, MII, I2C, JTAG
Supply Voltage 1.8V to 3.3V
Digital I/O 16 configurable pins
Data Rate 10/100 Mbps
Duplex Full / Half
Operating Temperature -40°C to +85°C
Package 64-QFN (9×9 mm)

Features

  • 2-port EtherCAT slave controller with integrated 10/100 PHY
  • Dual EtherCAT ports for line or daisy-chain topology
  • SPI/SQI slave interface for host processor communication
  • 16 configurable digital I/O lines for EtherCAT Digital I/O mode
  • Supports MII interface for external PHY connection
  • I2C and JTAG interfaces for configuration and test
  • Integrated 10/100 Ethernet PHY with HP Auto MDI/MDI-X
  • SyncManager watchdog for safety-critical applications
  • Distributed Clock support for precise synchronization
  • On-chip EEPROM interface for EtherCAT configuration

Applications

  • Industrial automation and process control
  • EtherCAT I/O slave modules
  • Servo drive and motor control interfaces
  • Factory automation and robotics
  • Programmable Logic Controller (PLC) expansion
Product Introduction: LAN9252TI/ML Product Introduction

The Microchip LAN9252TI/ML is a high-performance 2-port EtherCAT slave controller with integrated 10/100 Ethernet PHY, designed for industrial automation applications. It supports SPI/SQI and MII host interfaces, enabling flexible system design with a wide range of microcontrollers and FPGAs. The device provides 16 configurable digital I/O pins for EtherCAT Digital I/O mode, eliminating the need for an external host processor in simple I/O slave applications. With integrated dual EtherCAT ports, the LAN9252 supports line topology without external switches.

Working Principle: LAN9252TI/ML Working Principle

The LAN9252TI/ML operates as an EtherCAT communication slave node. 1) EtherCAT Processing Subsystem: The EtherCAT core processes incoming EtherCAT frames in hardware, extracting and inserting process data at deterministic sub-cycle times. Distributed Clock support enables precise synchronization across the network. 2) PHY Subsystem: Two integrated 10/100 Ethernet PHY transceivers provide the physical layer for EtherCAT ports, with Auto MDI/MDI-X and LinkMD diagnostics. 3) Host Interface Subsystem: SPI/SQI provides register-level access for host processors; MII interface enables external PHY connection. 4) Digital I/O Subsystem: 16 bidirectional I/O pins can be directly mapped to EtherCAT process data, enabling standalone I/O slave operation without a host MCU. Watchdog and sync managers ensure safe and deterministic data exchange.

Pin Description: LAN9252TI/ML Pin Definition and Functions
Pin Name Type Function
1 VDDCR Power 1.2V core regulator output (decoupling)
2-11 DIGIO[7:0] I/O Digital I/O data bits 0-7
12 SOF Output EtherCAT Start of Frame indicator
13 SO/SIO1 I/O SPI data out / SQI data bit 1
14 VDD33 Power 3.3V supply
15-25 DIGIO/PHY/CTL I/O Digital I/O, PHY, and control pins
26-35 TX/RX pairs I/O Ethernet TX/RX differential pairs for Port 1/2
36-50 LED/SPI/MII I/O LED, SPI, and MII interface pins
51-64 VDD/GND/CFG Power/Config Power, ground, and configuration pins
Application Scenarios: In which products and applications is LAN9252TI/ML used
  • Industrial Automation: EtherCAT I/O modules for PLC expansion
  • Servo Drives: Real-time communication interface for motor control
  • Robotics: Deterministic EtherCAT slave for robotic joint controllers
  • Process Control: Distributed I/O nodes in chemical and manufacturing plants
  • Standalone I/O: Digital I/O mode enables MCU-less EtherCAT slave designs
Alternative Models: What chips are recommended as replacements for LAN9252TI/ML
Manufacturer Part Number Package Notes
Beckhoff ET1100 BGA-128 EtherCAT slave controller, 4-port
Beckhoff ET1200 QFN-64 EtherCAT slave, 2-port, similar function
Microchip LAN9253 QFN-64 Enhanced EtherCAT slave with more features
TI AMIC110 BGA-196 EtherCAT slave on ARM SoC platform
Renesas RZ/T1 BGA-176 ARM Cortex-R4 with EtherCAT slave

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1