Opens in a new tab

LD1117ADT18TR

1.8V Fixed LDO, 800mA, 1.1V Dropout, DPAK, ST LD1117A

9876

Effective Inventory

Image for reference only

Manufacturer Part:

LD1117ADT18TR

Package:

DPAK (TO-252-3, 6.5 x 5.5 x 2.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LD1117ADT18TR from STMicroelectronics is a 1.8 V fixed-output low-dropout (LDO) voltage regulator with 800 mA output current and 1.1 V maximum dropout in a DPAK surface mount package.

Key Specifications

Type Fixed 1.8V LDO Linear Voltage Regulator
Output Voltage 1.8 V (+/-1%)
Output Current 800 mA
Dropout Voltage 1.1 V (max) @ Io=800mA
Input Voltage Range 2.9 V to 15 V
Line Regulation 0.2% (typical)
Load Regulation 0.4% (typical)
Quiescent Current 5 mA (typical)
Package DPAK (TO-252)
Operating Temperature -40C to +125C

Features

  • 1.8 V fixed output with +/-1% accuracy
  • 800 mA output current capability
  • Low 1.1 V dropout voltage at full load
  • Internal current limit and thermal shutdown
  • 2.2 uF minimum output capacitor
  • DPAK surface mount package

Applications

  • 1.8V logic rail from 3.3V supply
  • Microcontroller and FPGA I/O power
  • DDR memory termination voltage
  • Post-regulation for switching supplies
Product Introduction: LD1117ADT18TR Product Introduction

The LD1117ADT18TR from STMicroelectronics is a 1.8 V fixed-output low-dropout linear voltage regulator capable of delivering up to 800 mA. The device features a maximum dropout voltage of 1.1 V at full load, enabling efficient regulation from a 3.3 V input to a 1.8 V output. Internal current limiting and thermal shutdown protect against fault conditions. The LD1117A series improves upon the original LD1117 with better accuracy (+/-1% vs +/-2%) and lower dropout voltage. Only a 2.2 uF output capacitor is required for stability. The DPAK package provides excellent thermal performance with low junction-to-ambient thermal resistance.

Working Principle: LD1117ADT18TR Working Principle

The LD1117ADT18TR uses a PNP pass transistor in a common-emitter configuration to achieve low dropout voltage. The error amplifier compares a fraction of the output voltage (sensed through an internal resistor divider) with an internal 1.25 V bandgap reference. The amplifier output drives the PNP pass transistor to maintain regulation. When the output voltage drops below 1.8 V, the error amplifier increases the base drive to the PNP transistor, increasing output current and restoring the output voltage. The dropout voltage is the minimum input-to-output differential required for regulation, determined by the VCE(sat) of the PNP pass transistor plus the ballast resistor voltage drop. At 800 mA, this is typically 1.1 V. The internal current limit circuit senses the voltage across a ballast resistor and reduces the pass transistor drive when the current exceeds approximately 1.2 A. The thermal shutdown activates at approximately 150C junction temperature.

Pin Description: LD1117ADT18TR Pin Definition and Functions
Pin Name Type Function
1 GND/ADJ Ground Ground (fixed version)
2 VOUT Output Regulated 1.8V output
3 VIN Input Unregulated input (2.9-15V)
Application Scenarios: In which products and applications is LD1117ADT18TR used
  • 1.8V FPGA I/O bank power from 3.3V rail
  • DDR2/DDR3 VTT termination voltage regulator
  • Low-voltage MCU core power from single 3.3V supply
  • Post-regulation of switching converter output for clean 1.8V rail
Alternative Models: What chips are recommended as replacements for LD1117ADT18TR
Manufacturer Part Number Package Notes
ST LD1117ADT33TR DPAK 3.3V version, same family
TI TLV1117LV18DCYT SOT-223 1.8V, 1A LDO, similar
onsemi NCP1117DT18RKG DPAK 1.8V, 1A, pin-compatible
Diodes Inc AZ1117CH-1.8TRG1 DPAK 1.8V, 1A, similar specs
Microchip TC1117-1.8VCTTR SOT-223 1.8V, 800mA LDO

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1