Opens in a new tab

LD1117DT33CTR

800mA LDO, 3.3V fixed, 1V dropout, DPAK

8444

Effective Inventory

Image for reference only

Manufacturer Part:

LD1117DT33CTR

Package:

DPAK (TO-252) (6.60 x 6.20 x 2.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

LD1117DT33CTR Overview

The LD1117DT33CTR is an 800mA fixed 3.3V LDO linear regulator from STMicroelectronics, 1V dropout at 800mA, maximum input voltage 15V, in a DPak (TO-252) package, suitable for embedded system 3.3V power supply.

Key Features

  • Fixed output voltage: 3.3V
  • Maximum output current: 800mA
  • Dropout voltage: 1V at 800mA
  • Maximum input voltage: 15V
  • Line regulation: 0.2%
  • Load regulation: 0.4%
Product Introduction: LD1117DT33CTR Product Introduction

The LD1117DT33CTR is a fixed 3.3 V output, 800 mA low-dropout linear voltage regulator from STMicroelectronics in a DPAK (TO-252) surface-mount package. With a typical dropout voltage of 1 V at full load, it can regulate from a 4.3 V input to deliver a stable 3.3 V supply. The device features internal current limiting and thermal shutdown protection, requiring only a 10 uF output capacitor for stability, making it ideal for cost-sensitive point-of-load regulation.

Working Principle: LD1117DT33CTR Working Principle

The LD1117DT33CTR uses an NPN pass transistor in a Darlington configuration driven by an error amplifier. The error amplifier compares a fraction of the output voltage (sensed through an internal resistor divider) with a precision bandgap reference. When the output drops below the 3.3 V target, the amplifier increases drive to the pass transistor, raising the output. The NPN structure provides lower dropout than conventional PNP LDOs at moderate loads, while maintaining low quiescent current. The current limiter senses pass transistor current and reduces drive when the limit is exceeded. Thermal shutdown disables the output when junction temperature exceeds approximately 150 degrees C.

Pin Description: LD1117DT33CTR Pin Definition and Functions
Pin Name Description
1 GND Ground reference and thermal pad connection
2 VOUT Regulated 3.3 V output; connect 10 uF capacitor to GND
3 VIN Unregulated input supply (4.3 V to 15 V)

Package: DPAK (TO-252), 3 pins. The tab (pin 2) serves as both the output and primary thermal path to the PCB copper pour.

LD1117DT33CTR uses the DPAK (TO-252, SOT-428) surface-mount package with Pin 1 = GND/Adjust, Pin 2 = VOUT (tab), Pin 3 = VIN. The large tab underneath is electrically connected to VOUT (Pin 2) and must be soldered to a PCB copper pour for both electrical continuity and thermal dissipation. Unlike the LD1117DTTR fixed version, the DT33CTR variant has the 3.3V output voltage internally trimmed. The DPAK package provides superior thermal performance compared to SOT-223, with Rth(j-a) ≈ 50°C/W on FR-4 with 1oz copper. Input and output capacitors (10µF tantalum or ceramic) must be placed within 10mm of the device pins for stable operation.

Application Scenarios: In which products and applications is LD1117DT33CTR used
  • 3.3 V Point-of-Load Regulation: Converting 5 V or higher rails to 3.3 V for digital ICs, microcontrollers, and sensors
  • Battery-Powered Devices: Regulation from Li-ion (3.7-4.2 V) to 3.3 V logic supply with low dropout
  • Post-Regulation Filtering: Cleaning switching converter output ripple for noise-sensitive analog circuits
  • Embedded Systems: MCU and peripheral power supply in industrial control boards
  • USB-Powered Peripherals: Regulating 5 V USB bus to 3.3 V for interface ICs
Alternative Models: What chips are recommended as replacements for LD1117DT33CTR
Model Manufacturer Vout Iout Vdo Package
AMS1117-3.3 Advanced Monolithic 3.3 V 800 mA 1.1 V SOT-223
NCV1117-3.3 onsemi 3.3 V 800 mA 1.1 V DPAK
TLV1117-33 Texas Instruments 3.3 V 800 mA 1.1 V SOT-223
LM1117MP-3.3 Texas Instruments 3.3 V 800 mA 1.1 V SOT-223
RT9169-33GB Richtek 3.3 V 500 mA 1.0 V SOT-223

LD1117DT33CTR is a 3.3V/800mA LDO from STMicroelectronics in DPAK package with 1V typical dropout voltage. The AMS1117-3.3 is the most popular budget alternative with identical 3.3V/800mA output and pin-compatible SOT-223/DPAK package. The AZ1117IH-3.3TRG1 from Diodes Inc offers 1A output current with similar dropout. For lower dropout, TLV1117LV33 provides 300mV dropout with ceramic capacitor stability. The MCP1826T-3302E/DC from Microchip guarantees anyCAP stability.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1