Opens in a new tab

LF356N/NOPB

JFET-input op amp, 5MHz, 12V/us, 30pA Ibias, PDIP-8, ±5-18V

640

Effective Inventory

Image for reference only

Manufacturer Part:

LF356N/NOPB

Package:

PDIP-8 / N-8 (9.81 x 6.35mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LF356N/NOPB from Texas Instruments is a JFET-input operational amplifier in a PDIP-8 through-hole package. Featuring 5MHz bandwidth, 12V/µs slew rate, and ultra-low 30pA input bias current, it is ideal for high-impedance signal conditioning, photodiode amplifiers, and precision integrators.

Key Specifications

Number of Channels 1
Gain Bandwidth Product 5 MHz
Slew Rate 12 V/µs
Supply Voltage Range ±5V to ±18V
Input Offset Voltage 3 mV max (LF356B: 1mV)
Input Bias Current 30 pA typical
Input Impedance 10^12 Ω
Input Noise 15 nV/√Hz @ 1kHz
CMRR 85 dB min
Supply Current 5 mA typical
Operating Temperature 0 to 70°C
Package PDIP-8 (N suffix)

Features

  • JFET input stage: 30pA input bias current
  • 10^12Ω ultra-high input impedance
  • 5MHz bandwidth, 12V/µs slew rate
  • Internally compensated (unity-gain stable)
  • Low input noise: 15nV/√Hz
  • Wide supply range: ±5V to ±18V
  • Pin-compatible with LM741 (upgrade path)
  • Output short-circuit protection

Applications

  • Photodiode and photomultiplier amplifiers
  • Piezoelectric transducer signal conditioning
  • Precision integrators and sample-hold
  • pH and ion-selective electrode amplifiers
  • High-impedance buffer circuits
Product Introduction: LF356N/NOPB Product Introduction

The LF356N/NOPB from TI is a JFET-input op amp in PDIP-8 with 5MHz GBW, 12V/µs slew rate, and ultra-low 30pA input bias current. 10^12Ω input impedance makes it ideal for high-impedance source amplification. ±5V to ±18V supply range. Internally compensated, pin-compatible with LM741. N suffix denotes PDIP-8, NOPB denotes lead-free. Classic JFET op amp for photodiode, piezo, and pH electrode signal conditioning.

Working Principle: LF356N/NOPB Working Principle

The LF356 uses a JFET-input differential pair stage that provides the ultra-low 30pA input bias current and 10^12Ω input impedance. The JFET input also eliminates the input-stage bias current noise that dominates in bipolar op amps at high source impedances. The internal frequency compensation capacitor provides unity-gain stability. The output stage uses a class-AB push-pull configuration with short-circuit current limiting. The 12V/µs slew rate is determined by the ratio of the input stage tail current to the compensation capacitor. Unlike bipolar op amps, the JFET input exhibits essentially no input bias current variation with common-mode voltage.

Pin Description: LF356N/NOPB Pin Definition and Functions
Pin Name Type Function
1 OFFSET NULL 1 Adjust Offset trim terminal 1 (with 25kΩ pot to V-)
2 IN- Input Inverting input
3 IN+ Input Non-inverting input
4 V- Power Negative supply
5 OFFSET NULL 2 Adjust Offset trim terminal 2
6 OUT Output Output
7 V+ Power Positive supply
8 NC – No connect
Application Scenarios: In which products and applications is LF356N/NOPB used
  • Photodiode transimpedance amplifier with 30pA bias current for dark current
  • pH electrode buffer amplifier with 10^12Ω input impedance
  • Piezoelectric accelerometer charge amplifier
  • Precision integrator for analog computing
  • Sample-and-hold circuit with low droop rate
Alternative Models: What chips are recommended as replacements for LF356N/NOPB
Manufacturer Part Number Package Notes
TI LF356DR SOIC-8 SOIC SMD version
TI LF411CN/NOPB PDIP-8 Lower offset, improved JFET amp
ADI AD711JNZ PDIP-8 Higher performance JFET alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1