Opens in a new tab

LIS2HH12TR

3-axis 16-bit MEMS accelerometer, ±2/4/8g, I2C/SPI, 180µA, 32-level FIFO, LGA-12 2x2mm

12300

Effective Inventory

Image for reference only

Manufacturer Part:

LIS2HH12TR

Package:

LGA-12 (2.0 x 2.0 x 0.7mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LIS2HH12TR is an ultra-low-power 3-axis MEMS accelerometer from STMicroelectronics, featuring 16-bit digital output via I2C/SPI interface. With selectable full-scale ranges of ±2g/±4g/±8g and an integrated 32-level FIFO, it achieves 180µA operating current at 100Hz ODR. The compact LGA-12 package (2x2x0.7mm) is ideal for motion sensing in portable devices, wearables, and IoT applications.

Key Specifications

Number of Axes 3 (X, Y, Z)
Full-Scale Range ±2g / ±4g / ±8g (selectable)
Resolution 16-bit
Sensitivity 0.061 mg/digit (±2g range)
Output Data Rate 1Hz to 800Hz
Interface I2C (up to 1MHz) / SPI (up to 10MHz)
Supply Voltage 1.71V to 3.6V
Current Consumption 180µA @ 100Hz ODR
FIFO 32-level (stores X,Y,Z data)
Package LGA-12 (2.0 x 2.0 x 0.7mm)
Operating Temperature -40°C to +85°C

Features

  • 16-bit resolution with high-precision digital output
  • Ultra-low power: 180µA at 100Hz ODR
  • Integrated 32-level FIFO reduces host processor polling
  • ±2g/±4g/±8g selectable full-scale ranges
  • Dual interface: I2C and SPI on the same pins
  • Self-test function for reliability verification
  • 6D orientation detection
  • Single/double-tap recognition
  • Free-fall detection
  • Wakeup and activity/inactivity detection

Applications

  • Smartphones and tablets (screen rotation, gaming)
  • Wearable fitness trackers and smartwatches
  • IoT motion sensing nodes
  • Industrial vibration monitoring
  • Asset tracking and logistics
  • Drones and robotics (orientation sensing)
Product Introduction: LIS2HH12TR Product Introduction

The LIS2HH12TR is an ultra-low-power 3-axis digital MEMS accelerometer from STMicroelectronics. It features a 16-bit data output with selectable ±2g/±4g/±8g full-scale ranges, accessed via I2C or SPI serial interface. The device integrates a 32-level FIFO buffer that can store acceleration data, reducing the frequency of host processor reads and saving system power. Operating from 1.71V to 3.6V, it consumes only 180µA at 100Hz ODR and as little as 5µA in low-power mode. The 2x2x0.7mm LGA-12 package is among the smallest in its class, fitting into the tightest wearable and IoT designs. Built-in motion features include 6D orientation, tap recognition, free-fall detection, and activity/inactivity interrupts.

Working Principle: LIS2HH12TR Working Principle

The LIS2HH12 uses a capacitive MEMS sensing element with a proof mass suspended by silicon springs. Acceleration displaces the proof mass, changing the capacitance between the fixed and moving plates. A capacitive-to-voltage converter and sigma-delta ADC digitize this capacitance change into a 16-bit acceleration value for each axis. A digital filter with configurable ODR (1-800Hz) processes the output. The 32-level FIFO stores up to 32 sets of X/Y/Z acceleration data, allowing the host MCU to sleep between reads. Built-in state machines detect orientation changes (6D), tap events, free-fall, and activity/inactivity, generating interrupts that can wake the host processor. The self-test function applies electrostatic force to verify sensor functionality.

Pin Description: LIS2HH12TR Pin Definition and Functions
Pin Name Description
1 VDD_IO I/O supply voltage (1.71-3.6V)
2 NC No connect
3 NC No connect
4 SCL/SPC I2C clock / SPI clock
5 SDA/SDI/SDO I2C data / SPI data in/out
6 SDO/SA0 SPI data out / I2C address select
7 CS SPI chip select (active low) / I2C mode select
8 INT1 Interrupt 1 output (configurable)
9 INT2 Interrupt 2 output (configurable)
10 NC No connect
11 RES Reserved (connect to GND)
12 GND Ground
Pad VDD Analog supply (1.71-3.6V)
Application Scenarios: In which products and applications is LIS2HH12TR used
  • Smartphone Screen Rotation: Use the 6D orientation detection to automatically rotate the display between portrait and landscape modes. The interrupt-driven approach consumes minimal power — the host MCU only wakes when orientation changes, not on every data sample. The ±2g range provides the resolution needed for tilt sensing.
  • Wearable Activity Tracking: Configure the FIFO in stream mode to buffer acceleration data at 25Hz ODR. The host MCU wakes every 1.3 seconds (32 samples × 40ms) to read the FIFO in a burst, then returns to sleep. At 180µA, the LIS2HH12 adds minimal drain to a coin-cell battery. Step counting algorithms use the ±4g range to detect walking motion.
  • Industrial Vibration Monitoring: Set the ODR to 800Hz with ±8g range to capture machine vibration signatures. The FIFO ensures no data is lost during MCU interrupt latency. Use double-tap detection to implement a non-mechanical ‘wake-up’ interface on sealed industrial enclosures.
Alternative Models: What chips are recommended as replacements for LIS2HH12TR
Model Axes Range Current Key Difference
LIS2DH12TR 3 ±2/4/8/16g 2µA LP Lower power, 12-bit, wider range
LSM6DS3 6 (acc+gyro) ±2/4/8/16g 560µA Inertial module with gyroscope
BMA456 3 ±2/4/8/16g 140µA Bosch, built-in step counter
ADXL362 3 ±2/4/8g 1.8µA ADI, ultra-low power motion detect

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1