Opens in a new tab

LM26480SQ-AA/NOPB

Quad PMU: 2x 1.5 A buck + 2x 300 mA LDO, 2.8–5.5 V, 2 MHz, 24-WQFN

8236

Effective Inventory

Image for reference only

Manufacturer Part:

LM26480SQ-AA/NOPB

Package:

24-WQFN (RTW) — 4.0 x 4.0 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM26480SQ-AA/NOPB is a multi-function power management IC (PMU) from Texas Instruments that integrates two 1.5 A step-down DC-DC converters and two 300 mA LDOs. Packaged in a 24-pin WQFN (RTW), it operates from 2.8 V to 5.5 V and is optimized for powering advanced application processors and FPGAs. Each output features individual enable and power good for flexible power sequencing.

Key Specifications

Topology 2x Buck + 2x LDO (4-output PMU)
Input Voltage Range 2.8 V to 5.5 V
Buck1 Output 0.8 V to 2 V at 1.5 A
Buck2 Output 1 V to 3.3 V at 1.5 A
LDO Output 1 V to 3.5 V at 300 mA each
Buck Switching Frequency 2 MHz
Package 24-WQFN (RTW) — 4.0 x 4.0 mm
Operating Temperature -40°C to +85°C

Features

  • Integrated dual 1.5 A buck converters with up to 96% efficiency
  • Dual 300 mA LDOs with 25 mV typical dropout
  • 2 MHz PWM switching with automatic PFM mode at light loads
  • Individual enable and power good for each output
  • Internal power-on-reset monitors both buck outputs

Applications

  • Application processor and FPGA power supplies
  • Portable and handheld computing devices
  • Smartphones and tablets
  • Wireless communication modules
  • SSD and storage controller power
Product Introduction: LM26480SQ-AA/NOPB Product Introduction

The LM26480 is a multi-functional power management unit (PMU) from Texas Instruments, optimized for low-power digital applications. The device integrates two highly efficient 1.5 A step-down DC-DC converters and two 300 mA linear regulators in a compact 24-WQFN package. The DC-DC buck converters provide typical efficiencies up to 96%, with automatic PWM-to-PFM mode change under light loads for optimal efficiency across the load range. Features include soft start, undervoltage lockout, current overload protection, thermal overload protection, and an internal power-on-reset (POR) circuit.

Working Principle: LM26480SQ-AA/NOPB Working Principle

The LM26480 integrates four independent power rails in a single IC. The two buck converters use a constant-frequency PWM architecture at 2 MHz, automatically transitioning to PFM mode at light loads to maintain high efficiency. Each buck uses an internal PMOS high-side switch and NMOS synchronous rectifier. The two LDOs use PMOS pass transistors for low dropout (25 mV typical) and low quiescent current. The power-on-reset circuit monitors the buck outputs and asserts the nPOR flag when either output falls below the threshold. Each output has an independent enable pin for flexible power-up sequencing, and power good outputs indicate regulation status.

Pin Description: LM26480SQ-AA/NOPB Pin Definition and Functions
Pin Name Type Function
1 VIN Input Main input supply (2.8–5.5 V)
2 SW1 Output Buck1 switch node
3 PGND1 Power Buck1 power ground
4 FB1 Input Buck1 feedback voltage
5 EN1 Input Buck1 enable
6 PG1 Output Buck1 power good
7 EN3 Input LDO1 enable
8 VIN3 Input LDO1 input supply
9 VOUT3 Output LDO1 output
10 FB3 Input LDO1 feedback
11 VOUT4 Output LDO2 output
12 FB4 Input LDO2 feedback
13 VIN4 Input LDO2 input supply
14 EN4 Input LDO2 enable
15 PG2 Output Buck2 power good
16 EN2 Input Buck2 enable
17 FB2 Input Buck2 feedback voltage
18 AGND Power Analog ground
19 PGND2 Power Buck2 power ground
20 SW2 Output Buck2 switch node
Application Scenarios: In which products and applications is LM26480SQ-AA/NOPB used
  • Multi-rail power for ARM-based application processors
  • FPGA core and I/O voltage generation from single supply
  • Smartphone and tablet PMIC solution
  • Wireless module power management
  • Portable industrial instrument power supply
Alternative Models: What chips are recommended as replacements for LM26480SQ-AA/NOPB
Manufacturer Part Number Package Notes
TI TPS65218B0RSLR 28-VQFN 4-rail PMIC for processors
TI TPS6508640RSKR 56-VQFN Multi-rail PMIC, higher integration
Richtek RT5759AHGF 24-WQFN Dual buck + dual LDO PMU
Maxim MAX77620EWTP+T 42-WLP Multi-rail PMIC for mobile
ROHM BD71815AMWEVK 56-QFN Multi-rail PMIC alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1