Opens in a new tab

LM2675MX-3.3

SIMPLE SWITCHER buck, 8-40V in, 3.3V/1A out, 96% eff, SOIC-8

26767

Effective Inventory

Image for reference only

Manufacturer Part:

LM2675MX-3.3

Package:

SOIC-8 (4.9×3.9×1.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2675MX-3.3 from Texas Instruments is a SIMPLE SWITCHER® step-down voltage regulator providing a fixed 3.3V output at up to 1A from an 8V to 40V input. Built with LMDMOS process, it achieves up to 96% efficiency with only 5 external components. The 260 kHz fixed-frequency oscillator enables small filter components, while internal frequency compensation, thermal shutdown, and current limit provide a robust and easy-to-use buck converter solution in an SOIC-8 package.

Key Specifications

Topology Step-Down (Buck)
Output Voltage 3.3V (fixed)
Input Voltage Range 8V to 40V
Output Current 1A (maximum)
Efficiency Up to 96%
Switching Frequency 260 kHz (fixed)
Output Voltage Tolerance ±1.5% over line and load
Quiescent Current 2.5 mA (typical)
Standby Current 50 µA (shutdown mode)
Duty Cycle (max) 95%
Control Mode Voltage mode with internal compensation
Operating Temperature -40°C to +125°C
Package SOIC-8 (4.9×3.9 mm)

Features

  • SIMPLE SWITCHER: only 5 external components needed
  • Fixed 3.3V output with ±1.5% tolerance
  • Up to 96% efficiency — PCB traces provide sufficient heatsinking
  • 260 kHz fixed frequency for small filter components
  • Internal frequency compensation — no external compensation network
  • TTL-compatible shutdown/enable pin (50 µA standby)
  • Thermal shutdown and current limit protection
  • Also available in 5V, 12V, and adjustable output versions

Applications

  • 3.3V logic power from 12V or 24V industrial bus
  • Automotive battery to 3.3V microcontroller power
  • Telecom distributed power architecture
  • Industrial control and automation power
  • Battery-powered high-voltage to 3.3V conversion
Product Introduction: LM2675MX-3.3 Product Introduction

The LM2675MX-3.3 from Texas Instruments is a SIMPLE SWITCHER step-down regulator providing fixed 3.3V output at up to 1A from 8V to 40V input. Achieving up to 96% efficiency with only 5 external components, its 260 kHz fixed frequency and internal compensation simplify design. With thermal shutdown, current limit, and TTL shutdown in an SOIC-8 package, it is ideal for 3.3V logic power from 12V/24V industrial supplies, automotive systems, and telecom power.

Working Principle: LM2675MX-3.3 Working Principle

The LM2675MX-3.3 uses a voltage-mode buck converter topology with a fixed 260 kHz oscillator and patented internal frequency compensation. The LMDMOS power switch (0.25 Ω RDS(ON)) is integrated on-chip. During each switching cycle, the high-side switch connects the input voltage to the inductor, ramping up inductor current. When the switch turns off, the external Schottky catch diode conducts and inductor current ramps down, delivering energy to the output. The error amplifier compares an internal resistor divider tap (set to 3.3V) with a 1.21V reference, adjusting PWM duty cycle to maintain regulation. The voltage-mode control with internal compensation ensures stability across the specified input/output range and inductor values. The ON/OFF pin provides TTL-compatible shutdown: pulling it low enables normal operation, while pulling it high or leaving it open puts the device in standby (50 µA).

Pin Description: LM2675MX-3.3 Pin Definition and Functions
Pin Name Type Function
1 CB I/O Boot capacitor connection for high-side driver
2 VIN Power Input supply voltage (8-40V)
3 SW Output Switch output to inductor
4 GND Power Ground
5 FB Input Feedback (connect to output for fixed 3.3V version)
6 ON/OFF Input Shutdown control (LOW=on, HIGH/open=off)
7 NC — No connect
8 NC — No connect
Application Scenarios: In which products and applications is LM2675MX-3.3 used
  • 12V/24V industrial bus to 3.3V microcontroller and logic power
  • Automotive 12V battery to 3.3V MCU and sensor supply
  • Telecom -48V to 3.3V via intermediate bus converter
  • Industrial automation and PLC 3.3V power rails
  • Battery-powered portable instruments needing 3.3V from high voltage
Alternative Models: What chips are recommended as replacements for LM2675MX-3.3
Manufacturer Part Number Package Notes
TI LM2675MX-5.0 SOIC-8 5V fixed output version
TI LM2675MX-12 SOIC-8 12V fixed output version
TI LM2675MX-ADJ SOIC-8 Adjustable 1.21V-37V output
TI LM2679MX-3.3 TO-263-7 5A version, higher current
Monolithic Power MP8759GD SOIC-8 4A, 4.5-55V, newer alternative

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1