Opens in a new tab

LM2676S-5.0

8-40V 3A SIMPLE SWITCHER buck, 5V fixed output, 150mR DMOS, 260kHz, 94% eff, TO-263

6740

Effective Inventory

Image for reference only

Manufacturer Part:

LM2676S-5.0

Package:

TO-263-7 / KTW (10.10 x 8.89 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2676S-5.0 from Texas Instruments is a SIMPLE SWITCHER 3A step-down voltage regulator providing a fixed 5V output from an 8V to 40V input. Featuring a 150mOhm DMOS switch, 260kHz operation, and up to 94% efficiency in a TO-263 (KTW) package.

Key Specifications

Input Voltage 8 V to 40 V
Output Voltage 5.0 V (fixed, +/-2%)
Output Current 3 A
Switch RDS(on) 150 mOhm (DMOS)
Switching Frequency 260 kHz (fixed)
Efficiency Up to 94%
Quiescent Current 4.2 mA typical (operating)
Standby Current 50 uA (shutdown via ON/OFF pin)
Duty Cycle 0% to 100%
Protection Thermal shutdown, current limit
Operating Temperature -40°C to +125°C (junction)
Package TO-263-7 (KTW)

Features

  • 3A output with integrated 150mOhm DMOS switch for high-efficiency buck regulation
  • Fixed 5V output with +/-2% accuracy over line, load, and temperature
  • 8V to 40V wide input range suitable for 12V, 24V, and 28V systems
  • Only 5 external components required for a complete step-down regulator
  • ON/OFF pin for shutdown with 50uA standby current

Applications

  • 12V/24V to 5V step-down conversion at up to 3A in industrial systems
  • Telecom and automotive power supply with 8-40V input range
  • Distributed power architectures requiring efficient 5V regulation
Product Introduction: LM2676S-5.0 Product Introduction

The LM2676S-5.0 from Texas Instruments is a SIMPLE SWITCHER step-down voltage regulator providing a fixed 5.0V output at up to 3A from an 8V to 40V input. The device integrates a 150mOhm DMOS power switch and all necessary control circuitry, requiring only 5 external components (input capacitor, bootstrap capacitor, catch diode, inductor, and output capacitor) for a complete step-down regulator design. The 260kHz fixed-frequency oscillator allows the use of physically small inductors and capacitors. Efficiency reaches up to 94% at full load, significantly reducing thermal management requirements. The output voltage tolerance is maintained at +/-2% over all line, load, and temperature conditions. An ON/OFF control pin allows the regulator to be shut down to a 50uA standby current. Internal thermal shutdown and current limiting protect the device during fault conditions. The TO-263 (KTW) surface-mount package provides excellent thermal performance with a low junction-to-case thermal resistance.

Working Principle: LM2676S-5.0 Working Principle

The LM2676S-5.0 uses a current-mode buck regulator topology with an integrated DMOS power switch. (1) Current-Mode Control: An internal oscillator generates a 260kHz clock. Each clock cycle, the high-side DMOS switch turns on and current through the inductor ramps up. A current sense comparator monitors the switch current and terminates the on-time when the peak current reaches the error amplifier output level. (2) Output Regulation: The internal resistor divider samples the output voltage and compares it with a 2.21V internal reference. The error amplifier adjusts the peak current setpoint to maintain 5V output regulation. (3) DMOS Switch: The 150mOhm N-channel DMOS transistor provides the power switching function. A bootstrap circuit (CB capacitor) generates the gate drive voltage above VIN for the high-side switch. (4) Catch Diode: An external Schottky diode conducts the inductor current during the switch off-time. The diode must have a reverse voltage rating above VIN and a forward current rating above IOUT. (5) Shutdown: When the ON/OFF pin is pulled below 1.4V, the regulator enters standby mode with 50uA supply current. When floating or driven above 2.0V, normal operation resumes.

Pin Description: LM2676S-5.0 Pin Definition and Functions
Pin Name Function
1 SWITCH Power switch output (to inductor)
2 VIN Input supply (8-40V)
3 CB Bootstrap capacitor (to SWITCH)
4 GND Ground
5 FEEDBACK Output voltage feedback (connect to VOUT for 5V)
6 ON/OFF Shutdown control (float=on, low=off)
7 GND Ground (tab)
Application Scenarios: In which products and applications is LM2676S-5.0 used
  • 12V or 24V to 5V at 3A in industrial and telecom power supplies
  • Automotive 12V/24V system 5V regulation with TO-263 thermal performance
  • Distributed power 5V regulation with 94% efficiency and 5-component BOM
Alternative Models: What chips are recommended as replacements for LM2676S-5.0
Manufacturer Part Number Package Notes
TI LM2676S-3.3 TO-263-7 3.3V fixed output version
TI LM2676S-ADJ TO-263-7 Adjustable output version
TI LM2679T-5.0 TO-220-7 5A version, through-hole

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1