Opens in a new tab

Home » Integrated Circuits ICs » LM2901DR2G

LM2901DR2G

Quad comparator, 3-36V, 25nA Ibias, SOIC-14, ground CM range, 130mV Vsat, automotive

5779

Effective Inventory

Image for reference only

Manufacturer Part:

LM2901DR2G

Package:

SOIC-14 (8.75 x 4.00 x 1.50 mm, 1.27mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2901DR2G from onsemi is a quad single-supply voltage comparator in a SOIC-14 package. Operating from 3V to 36V with low input bias current and common-mode range to ground, it is designed for level detection and signal conditioning in automotive and industrial systems.

Key Specifications

Channels 4 (quad)
Supply Voltage 3 V to 36 V (single) or +/-1.5 V to +/-18 V (split)
Input Bias Current 25 nA typical
Input Offset Voltage 7 mV max
Output Saturation Voltage 130 mV typical at 4 mA
Response Time 1.3 us typical
Operating Temperature -40C to +105C

Features

  • Quad comparator in SOIC-14 with 3V to 36V single or split supply operation
  • 25nA low input bias current for high-impedance sensor interfaces
  • Input common-mode voltage range includes ground for single-supply designs
  • 130mV low output saturation voltage at 4mA for direct logic interface
  • TTL and CMOS compatible open-collector output
  • ESD clamps on inputs increase reliability without affecting operation

Applications

  • Automotive level detection and low-level sensing
  • Industrial signal conditioning and threshold comparison
  • Zero-crossing detection and window comparator circuits
  • Memory and logic interface applications
Product Introduction: LM2901DR2G Product Introduction

The LM2901DR2G from onsemi is a quad single-supply voltage comparator in a SOIC-14 package. The device consists of four independent precision voltage comparators designed to operate from a single 3V to 36V supply or from split supplies of +/-1.5V to +/-18V. The 25nA typical input bias current makes the comparators suitable for high-impedance sensor interfaces without loading the signal source. The input common-mode voltage range extends to ground, enabling true single-supply operation where the inputs can be at or near ground potential. The open-collector output can sink up to 16mA and provides a low 130mV typical saturation voltage at 4mA, allowing direct interface with TTL and CMOS logic levels. The open-collector architecture also enables wired-OR output connections for multi-comparator functions. ESD clamps on the inputs protect against electrostatic discharge without affecting normal device operation. The 1.3us typical response time is adequate for most level detection and signal conditioning applications. The LM2901 is the automotive-grade variant of the industry-standard LM339 comparator family, qualified for operation from -40C to +105C with AEC-Q100 availability (NCV2901).

Working Principle: LM2901DR2G Working Principle

The LM2901DR2G contains four identical comparator circuits. (1) Comparator Core: Each comparator has inverting (-) and non-inverting (+) inputs and an open-collector output. The comparator amplifies the voltage difference between the two inputs. When the non-inverting input voltage exceeds the inverting input, the output transistor turns off (output high via external pull-up). When the inverting input exceeds the non-inverting input, the output transistor turns on (output low, saturating to approximately 130mV at 4mA). (2) Input Stage: The PNP input stage allows the common-mode voltage range to extend to ground, a key advantage over many op-amps used as comparators. The 25nA input bias current flows out of the input pins. (3) Open-Collector Output: The output can only sink current (pull to ground). An external pull-up resistor is required to establish the high-level output voltage. This allows the output to be pulled up to any voltage up to 36V, independent of the comparator supply voltage, enabling level-shifting functions. (4) Wired-OR: Multiple open-collector outputs can be connected together with a single pull-up resistor to implement OR logic functions.

Pin Description: LM2901DR2G Pin Definition and Functions
Pin Name Type Function
1 OUT2 O Comparator 2 output
2 OUT1 O Comparator 1 output
3 VCC Power Positive supply (3-36V)
4 IN1- I Comparator 1 inverting input
5 IN1+ I Comparator 1 non-inverting input
6 IN2- I Comparator 2 inverting input
7 IN2+ I Comparator 2 non-inverting input
8 IN3+ I Comparator 3 non-inverting input
9 IN3- I Comparator 3 inverting input
10 IN4+ I Comparator 4 non-inverting input
11 IN4- I Comparator 4 inverting input
12 GND Ground Ground
13 OUT4 O Comparator 4 output
14 OUT3 O Comparator 3 output
Application Scenarios: In which products and applications is LM2901DR2G used
  • Automotive level detection and low-level sensing with ground CM range
  • Industrial signal conditioning and threshold comparison at 3-36V
  • Zero-crossing detection and window comparator circuits with open-collector
  • Memory and logic interface applications with 25nA input bias current
Alternative Models: What chips are recommended as replacements for LM2901DR2G
Manufacturer Part Number Package Notes
onsemi LM339DR2G SOIC-14 0-70C commercial grade
TI LM2901DR SOIC-14 TI brand equivalent
onsemi NCV2901DR2G SOIC-14 AEC-Q100 automotive
TI LMV339IDR SOIC-14 Low voltage, 2.7-5V

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1