Opens in a new tab

LM2936MP-5.0

50mA 5V LDO, 9uA IQ, SOT-223, 40V input, reverse polarity protection, automotive

6630

Effective Inventory

Image for reference only

Manufacturer Part:

LM2936MP-5.0

Package:

SOT-223 (6.50 x 3.50 x 1.60 mm, DCY package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2936MP-5.0 from Texas Instruments is a 50mA, 5V fixed-output ultra-low quiescent current LDO voltage regulator in a SOT-223 package. With 15uA maximum IQ at 100uA load and reverse battery protection, it is specifically designed for automotive and battery-operated systems.

Key Specifications

Output Voltage 5.0 V fixed (+/-3% over line, load, temperature)
Output Current 50 mA
Input Voltage Range 5.5 V to 40 V (60V for HV version)
Quiescent Current 9 uA typical (100uA load), 15 uA max
Dropout Voltage 200 mV typical at 50 mA
Reverse Polarity Protection -50V transient, -24V continuous
Operating Temperature -40C to +125C

Features

  • Ultra-low quiescent current of 9uA typical at 100uA load for battery longevity
  • +/-3% output voltage tolerance over line, load, and temperature
  • 200mV typical dropout at 50mA for wide input-to-output differential
  • -24V reverse battery and -50V transient input protection
  • Internal short-circuit current limit and thermal shutdown
  • SOT-223 surface-mount package for compact layouts

Applications

  • Automotive ECU 5V standby power with ultra-low IQ
  • Battery-powered instrument 5V regulation
  • Industrial control 5V supply with reverse polarity protection
  • Always-on automotive accessory power with 15uA max IQ
Product Introduction: LM2936MP-5.0 Product Introduction

The LM2936MP-5.0 from Texas Instruments is a 50mA, 5V fixed-output ultra-low quiescent current low-dropout voltage regulator in a SOT-223 (DCY) surface-mount package. With less than 15uA quiescent current at a 100uA load, the LM2936 is specifically designed for automotive and battery-operated systems where standby power consumption must be minimized. The device features a low-dropout PNP pass element with 200mV typical dropout at 50mA, allowing operation from input voltages as low as 5.5V while maintaining 5V output regulation. The input operating voltage range extends to 40V (60V for the LM2936HV variant), providing adequate margin for automotive load dump transients. The LM2936 retains all features common to LDO regulators including reverse battery protection (-24V continuous, -50V transient), short-circuit current limiting, and thermal shutdown. The +/-3% output voltage tolerance is guaranteed over the full output current, input voltage, and temperature range. The SOT-223 package provides a compact footprint with the exposed tab serving as both the ground connection and the primary thermal path.

Working Principle: LM2936MP-5.0 Working Principle

The LM2936MP-5.0 uses a PNP pass transistor LDO topology optimized for ultra-low quiescent current. (1) PNP Pass Element: The PNP transistor is connected between the input and output. Unlike NPN-pass regulators that require base drive current proportional to the load current (increasing IQ), the PNP pass element draws minimal base current. The quiescent current remains nearly constant regardless of load, achieving the ultra-low 9uA typical IQ even at 100uA load. (2) Voltage Regulation: An internal bandgap reference generates a stable voltage. The error amplifier compares a fraction of the output voltage with the reference and adjusts the PNP base drive to maintain regulation. (3) Reverse Polarity Protection: An internal circuit detects negative input voltages and turns off the pass transistor, preventing reverse current flow and protecting the powered circuitry. (4) Thermal Shutdown: When the junction temperature exceeds approximately 150C, the pass transistor is turned off. After the device cools, regulation resumes. (5) Current Limiting: The output current is limited to approximately 120mA (short-circuit) to protect against fault conditions.

Pin Description: LM2936MP-5.0 Pin Definition and Functions
Pin Name Type Function
1 OUT Output Regulated 5V output
2 GND Ground Ground (tab, thermal contact)
3 IN Power Input supply (5.5-40V)
Application Scenarios: In which products and applications is LM2936MP-5.0 used
  • Automotive ECU 5V standby power with 9uA ultra-low IQ for battery longevity
  • Battery-powered instrument 5V regulation with reverse polarity protection
  • Industrial control 5V supply with -50V transient protection in SOT-223
  • Always-on automotive accessory power with 15uA max quiescent current
Alternative Models: What chips are recommended as replacements for LM2936MP-5.0
Manufacturer Part Number Package Notes
TI LM2936HVMP-5.0 SOT-223 60V input version
TI LM2936MX-5.0 SOIC-8 Same function, larger pkg
onsemi NCV4275CDT50RKG DPAK 50mA, 5V, automotive
ST LF50CV TO-220 500mA, higher current

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1