Opens in a new tab

LM317BTG

1.5A Adjustable LDO Regulator, 1.2-37V Output, TO-220

13456

Effective Inventory

Image for reference only

Manufacturer Part:

LM317BTG

Package:

TO-220-3 (15.0 x 10.4 x 4.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM317BTG from onsemi is a 1.5 A adjustable positive linear voltage regulator with 1.2 V to 37 V output range and 40 V maximum input in a TO-220 through-hole package.

Key Specifications

Type Adjustable Positive Linear Voltage Regulator
Output Voltage Range 1.2 V to 37 V
Output Current 1.5 A
Input Voltage (Max) 40 V
Dropout Voltage 2.5 V (typical) @ Io=1.5A
Line Regulation 0.01%/V (typical)
Load Regulation 0.1% (typical)
Reference Voltage 1.25 V
Package TO-220-3
Operating Temperature 0C to +125C

Features

  • Output adjustable from 1.2 V to 37 V
  • 1.5 A output current
  • 0.1% typical load regulation
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • Output transistor safe-area compensation

Applications

  • Adjustable bench power supplies
  • Battery chargers with constant voltage/current
  • Local on-card voltage regulation
  • Current limiter and constant current source
Product Introduction: LM317BTG Product Introduction

The LM317BTG from onsemi is the industry-standard adjustable positive linear voltage regulator capable of supplying 1.5 A over an output voltage range of 1.2 V to 37 V. The output voltage is set using only two external resistors. The device features excellent 0.01%/V line regulation and 0.1% load regulation. Internal protection circuits include thermal shutdown, current limiting, and safe-area compensation for the output transistor. The TO-220 package allows mounting on a heatsink for high-power dissipation applications. The LM317 is one of the most widely used linear regulators in the industry.

Working Principle: LM317BTG Working Principle

The LM317BTG maintains a constant 1.25 V reference between the output (VOUT) and adjustment (ADJ) pins. This reference voltage drives a constant current through the external resistor R1 (typically 240 Ohm) from VOUT to ADJ. The ADJ pin draws a very small quiescent current (50 uA typical), which also flows through the second resistor R2 from ADJ to ground. The output voltage is calculated as VOUT = 1.25V x (1 + R2/R1) + IADJ x R2. Since IADJ is typically 50 uA, its contribution is negligible for most designs. The internal error amplifier compares the 1.25 V reference with the voltage across R1 and adjusts the pass transistor to maintain regulation. The thermal shutdown circuit monitors junction temperature and shuts down the pass transistor above approximately 170C. The current limiting circuit restricts output current to approximately 2.2 A under short-circuit conditions.

Pin Description: LM317BTG Pin Definition and Functions
Pin Name Type Function
1 ADJ Input Adjustment pin (sets output voltage)
2 VOUT Output Regulated output (1.2-37V)
3 VIN Input Unregulated input (up to 40V)
Application Scenarios: In which products and applications is LM317BTG used
  • Adjustable bench power supply 1.2-30V at 1.5A
  • Constant current battery charger with current-set resistor
  • On-card 5V to 3.3V regulation with heatsink
  • Variable speed DC motor controller power stage
Alternative Models: What chips are recommended as replacements for LM317BTG
Manufacturer Part Number Package Notes
TI LM317T TO-220 Industry standard equivalent
ST LM317T TO-220 Industry standard equivalent
onsemi LM317BD2TG D2PAK SMD version, same function
TI LM317HV TO-220 High-voltage version (57V max input)
TI LM338T TO-220 5A version, same topology

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1