Opens in a new tab

LM317DCYR

TI 1.5A adjustable positive LDO, 1.25V~37V output, SOT-223, 80dB ripple rejection

3824

Effective Inventory

Image for reference only

Manufacturer Part:

LM317DCYR

Package:

SOT-223 (DCY suffix, Tab=VOUT)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM317DCYR from Texas Instruments is a classic 1.5A adjustable positive voltage linear regulator in a SOT-223 package. It provides an output voltage range of 1.25V to 37V set by just two external resistors. With excellent line and load regulation, built-in thermal shutdown, and current limiting, the LM317 remains one of the most versatile linear regulators for adjustable power supply designs.

Key Specifications

Output Voltage Range 1.25V ~ 37V (adjustable)
Max Output Current 1.5A
Dropout Voltage 3V (typical)
Line Regulation 0.01%/V (typical)
Load Regulation 0.1% (typical)
Reference Voltage 1.25V (typical)
Ripple Rejection 80dB (typical)
Operating Temperature 0C ~ +125C
Package SOT-223 (DCY suffix)

Features

  • Output voltage adjustable from 1.25V to 37V via two resistors
  • Built-in thermal shutdown and safe operating area protection
  • Current limit typically 2.2A
  • Excellent 80dB ripple rejection ratio
  • Low quiescent current of 50uA typical
  • Long-established industry standard with wide availability

Applications

  • Adjustable bench power supplies
  • Battery charger circuits
  • Constant current source for LED driving
  • Local on-card regulation in distributed power systems
  • Variable voltage reference generation
Product Introduction: LM317DCYR Product Introduction

The LM317DCYR is a 1.5A adjustable positive voltage linear regulator from Texas Instruments, housed in a SOT-223 surface-mount package. As an industry-standard device, it delivers a continuously adjustable output voltage from 1.25V to 37V using only two external resistors to set the output. The device features excellent line regulation of 0.01%/V and load regulation of 0.1%, making it suitable for precision power supply applications. Internal current limiting, thermal shutdown, and safe operating area compensation provide robust protection against fault conditions. The LM317 maintains a reference voltage of 1.25V between the output and adjustment terminals, with a typical quiescent current of just 50uA flowing through the adjust pin. Its ripple rejection ratio of 80dB makes it effective at cleaning noisy input supplies.

Working Principle: LM317DCYR Working Principle

The LM317DCYR maintains a constant 1.25V reference between the VOUT and ADJ pins. A resistor (R1) connected between VOUT and ADJ sets a constant current, while a second resistor (R2) from ADJ to ground determines the output voltage: VOUT = 1.25V x (1 + R2/R1) + IADJ x R2. The adjustment pin current (IADJ) is typically 50uA and remains constant, minimizing its effect on output accuracy. The internal error amplifier compares the divided output voltage to the internal reference and drives the series pass transistor to maintain regulation. Thermal shutdown activates at approximately 170C junction temperature, while current limiting engages around 2.2A to protect the device during overload conditions.

Pin Description: LM317DCYR Pin Definition and Functions
Pin Name Function
1 ADJ Adjustment Terminal
2 VOUT Output (connected to Tab)
3 VIN Input Supply
Tab VOUT Output / Thermal Pad
Application Scenarios: In which products and applications is LM317DCYR used
  • Adjustable power supplies: Set output from 1.25V to 37V using two external resistors for bench or lab applications
  • Battery chargers: Configure as constant-voltage or constant-current source for NiCd, NiMH, or lead-acid batteries
  • LED drivers: Operate in constant-current mode by placing the load between ADJ and ground with a current-setting resistor
  • Local regulation: Provide clean, regulated voltage on individual PCB cards in distributed power architectures
  • Audio circuits: Use as a low-noise regulated supply for analog signal chains leveraging the 80dB ripple rejection
Alternative Models: What chips are recommended as replacements for LM317DCYR
Model Brand Max Current Package Key Difference
LM317EMP TI 1.5A SOT-223 Same die, different reel
LM317AT onsemi 1.5A TO-220 Through-hole version
LM1117-ADJ TI 800mA SOT-223 Lower current, lower dropout
LT1086CT ADI 1.5A TO-220 Lower dropout (1.5V)
AMS1117-ADJ Advanced Monolithic 1A SOT-223 Lower cost alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1