Opens in a new tab

LM358ADT

Dual general-purpose op amp, 3-32V, 1.1MHz GBW, ground-sensing, SOIC-8, 0-70C

8653

Effective Inventory

Image for reference only

Manufacturer Part:

LM358ADT

Package:

SOIC-8 (4.90 x 3.90 x 1.27 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM358ADT from STMicroelectronics is a dual general-purpose operational amplifier operating from a single 3V to 32V supply or +/-1.5V to +/-16V dual supplies. Featuring 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and low 300 uA supply current per amplifier, it is one of the most widely used general-purpose op amps. The A suffix denotes commercial temperature range (0-70 C) and DT denotes SOIC-8 package in tape-and-reel.

Key Specifications

Type Dual General-Purpose Op Amp
Channels 2
Supply Voltage 3V – 32V (single) / +/-1.5V – +/-16V (dual)
GBW 1.1 MHz (typical)
Slew Rate 0.6 V/us (typical)
Input Offset Voltage 2 mV (typical), 7 mV (max)
Input Bias Current 20 nA (typical)
Supply Current 0.5 mA per channel (typical)
Output Current 30 mA (typical, short circuit)
Common-Mode Range 0V to VCC-1.5V
CMRR 85 dB (typical)
Package SOIC-8
Operating Temp 0 to 70 C (A suffix)

Features

  • Single or dual supply operation from 3V to 32V
  • Low supply current: 500 uA per amplifier (essentially independent of supply voltage)
  • Input common-mode voltage range includes ground (single-supply operation)
  • 1.1 MHz gain-bandwidth product (temperature compensated)
  • Internal frequency compensation (no external components needed)
  • Large DC voltage gain: 100 dB
  • Large output voltage swing: 0V to VCC-1.5V
  • Industry-standard LM358 pinout compatible with LM258/LM158/LM2904

Applications

  • Battery-powered instruments and portable devices
  • Active filters and signal conditioning
  • Low-frequency oscillator circuits
  • DC gain blocks and buffer amplifiers
  • Transducer amplifier and voltage followers
Product Introduction: LM358ADT Product Introduction

The LM358ADT from STMicroelectronics is a dual general-purpose operational amplifier that operates from a single supply of 3V to 32V (or dual supplies of +/-1.5V to +/-16V). It features 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and low 500 uA per-amplifier supply current essentially independent of supply voltage. The input common-mode voltage range includes ground, enabling single-supply operation without a negative rail. The A suffix denotes commercial temperature range (0 to 70 C) and DT denotes the SOIC-8 package in tape-and-reel packaging.

Working Principle: LM358ADT Working Principle

The LM358ADT uses a bipolar input stage with PNP differential pairs that allow the common-mode input voltage to extend down to ground (0V), making it ideal for single-supply applications. The output stage uses a class AB push-pull topology with active pull-down, enabling the output to swing close to ground without a pull-down resistor. Internal frequency compensation (a 30 pF capacitor) provides unconditional stability for unity-gain operation. The two amplifiers share only the supply pins and are otherwise independent. The output can source 20-40 mA and is short-circuit protected with infinite duration.

Pin Description: LM358ADT Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 GND/V- Power Ground (single supply) / negative supply (dual)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 V+ Power Positive supply (3-32V)
Application Scenarios: In which products and applications is LM358ADT used
  • Single-supply signal conditioning: Ground-sensing input for 0V-referenced signals
  • Active filters: Low-pass, band-pass with 1.1 MHz GBW for audio-range applications
  • Battery instruments: 3V minimum operation with 500 uA per channel
  • Voltage followers: Unity-gain buffers with internal compensation
  • Oscillators: RC and Wien bridge oscillators using dual amplifiers
Alternative Models: What chips are recommended as replacements for LM358ADT
Manufacturer Part Number Package Notes
TI LM358DR SOIC-8 Same function, TI manufacture
ST LM358DT SOIC-8 Industrial grade -40-85 C version
Onsemi LM358DR2G SOIC-8 Equivalent, alternate source
TI LMV358IDR SOIC-8 Low-voltage version, 2.7-5.5V, 1MHz

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1