Opens in a new tab

LM386N-3

700mW mono audio amp, Class-AB, gain 20-200, 4-12V, PDIP-8

15000

Effective Inventory

Image for reference only

Manufacturer Part:

LM386N-3

Package:

PDIP-8 (9.81 x 6.35 x 5.08mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM386N-3 from Texas Instruments is a low-voltage audio power amplifier delivering 700mW into 8Ω from a 9V supply, with internally-set gain of 20 (adjustable to 200), 4mA quiescent current, and only a few external components required in a PDIP-8 package.

Key Specifications

Architecture Class-AB
Channels 1 (Mono)
Supply Voltage 4V to 12V (N-3 version)
Output Power 700mW typical @ 9V, 8Ω
Voltage Gain 20 (26dB) default; adjustable 20-200 via pins 1-8
Quiescent Current 4mA typical
Input Impedance 50kΩ
Input Bias Current 250nA typical
THD+N 0.2% @ AV=20, 6V, 8Ω, 125mW
Output Bias Auto-centering to VCC/2
Bandwidth 300kHz @ AV=20; 100kHz @ AV=200
Maximum Output Swing VCC−1.5V peak-to-peak typical
Operating Temperature 0°C to +70°C
Package PDIP-8 (9.81 x 6.35mm)

Features

  • Battery operation with low quiescent current: 4mA
  • Minimal external components (as few as 2)
  • Wide supply range: 4V to 12V
  • Gain adjustable from 20 to 200
  • Ground-referenced inputs
  • Self-centering output quiescent voltage
  • Low distortion: 0.2% at 125mW

Applications

  • Battery-powered audio amplifier
  • Small speaker driver
  • AM/FM radio amplifier
  • Intercom and talk-back
  • Mini guitar amplifier
Product Introduction: LM386N-3 Product Introduction

The LM386N-3 from Texas Instruments is a low-voltage audio power amplifier designed for battery-powered consumer applications. The N-3 variant delivers up to 700mW into an 8Ω speaker from a 9V supply, making it suitable for small portable speakers, radios, and DIY audio projects. The internal gain is set to 20 (26dB) by default, requiring no external components for basic operation. Adding a capacitor between pins 1 and 8 bypasses the internal 1.35kΩ resistor, increasing the gain to 200 (46dB); a series resistor sets any gain between 20 and 200. The inputs are ground-referenced through internal 50kΩ resistors, eliminating the need for external DC biasing. The output automatically biases to half the supply voltage, enabling single-supply operation with an output coupling capacitor. The 4mA quiescent current at 6V means the amplifier draws only 24mW at idle — ideal for battery operation. The LM386 has been in continuous production since the 1970s and remains one of the most popular audio amplifier ICs for hobbyists.

Working Principle: LM386N-3 Working Principle

The LM386 uses a Lin topology: a PNP differential input stage, a common-emitter voltage amplifier stage, and a Class-AB complementary push-pull output stage. The two 50kΩ resistors from each input to ground provide ground-referenced biasing — the inputs sit at approximately 12.5mV above ground due to 250nA input bias current. The gain is set by the feedback network between pins 1 and 8: internally, a 1.35kΩ resistor and a 150Ω resistor form the emitter degeneration of the differential pair, setting the gain to 1 + (15kΩ/1.5kΩ) = 20. Bypassing the 1.35kΩ resistor with a capacitor (pin 1 to pin 8) reduces the degeneration to just 150Ω, increasing the gain to 1 + (15kΩ/150Ω) = 200. A series resistor can set intermediate gains. The output stage is a complementary push-pull pair biased into Class-AB through a VBE multiplier, automatically centering the output at VCC/2. The 250µF output coupling capacitor blocks this DC bias from the speaker while passing the AC audio signal. The capacitor forms a high-pass filter with the speaker impedance: fC = 1/(2π×250µF×8Ω) ≈ 80Hz. The bypass pin (7) connects to an internal 50kΩ/10µF node; adding an external 10µF capacitor from pin 7 to ground improves power supply rejection by bypassing the internal node.

Pin Description: LM386N-3 Pin Definition and Functions
Pin Name Type Description
1 GAIN Input Gain adjust (capacitor/resistor to pin 8)
2 IN− Input Inverting input (usually AC-coupled or grounded)
3 IN+ Input Non-inverting input (signal input)
4 GND Power Ground
5 OUT Output Audio output (via coupling capacitor to speaker)
6 VCC Power Supply voltage (4V to 12V)
7 BYPASS Input Bypass capacitor (10µF to GND for PSRR)
8 GAIN Input Gain adjust (capacitor/resistor to pin 1)

LM386N-3 uses the PDIP-8 package with audio power amplifier pinout: Pin 1 = Gain Set (bypass with 10µF to Pin 8 for 200x gain), Pin 2 = Inverting Input (-), Pin 3 = Non-inverting Input (+), Pin 4 = GND, Pin 5 = Output (to speaker via 250µF coupling cap), Pin 6 = VCC (4-12V for N-3), Pin 7 = Bypass (decouple with 10µF to GND for power supply ripple rejection), Pin 8 = Gain Set. Default gain is 20x (26dB) with pins 1 and 8 open. Adding a 10µF cap between pins 1 and 8 increases gain to 200x (46dB). A series resistor (1.2kΩ) with the 10µF cap sets intermediate gains. The Zobel network (0.05µF + 10Ω from Pin 5 to GND) prevents oscillation with inductive speaker loads.

Application Scenarios: In which products and applications is LM386N-3 used
  • Basic Amp (Gain=20): Signal → 10kΩ pot → 0.05µF cap → pin 3; pin 2 grounded; 250µF cap from pin 5 to 8Ω speaker; 10µF cap pin 7 to GND
  • High Gain (200): Same as above plus 10µF cap between pins 1 and 8; amplifies microphone-level signals directly
  • Gain=50: 1.2kΩ resistor + 10µF cap in series between pins 1 and 8; intermediate gain for line-level signals
  • Mini Guitar Amp: Guitar → 0.05µF → pin 3; gain=200; pin 5 → 250µF → 8Ω speaker; 9V battery power
  • Bass Boost: RC network (0.033µF + 10kΩ) from pin 1 to pin 5 boosts low frequencies; enhances bass response
Alternative Models: What chips are recommended as replacements for LM386N-3
Model Manufacturer Key Difference Package Specs
LM386N-1 TI Lower-power 250mW version with 4-12V supply for headphone and small speaker applications DIP-8 250mW/4-12V
LM386N-4 TI Higher-power 1W version with 5-18V supply range for louder speaker output capability DIP-8 1W/5-18V
TDA7052A NXP 1W mono audio amp with DC volume control in DIP-8 for simple audio output stages DIP-8 1W/DC vol
PAM8302A Diodes Inc Class-D 2.5W audio amplifier with 90% efficiency in SOT-23-6 for portable speakers SOT-23-6 2.5W/Class-D
TDA2030A ST 18W mono Class-AB audio power amplifier for higher-power speaker driver applications PENTAWATT-5 18W/±18V

LM386N-3 is a 325mW low-voltage audio power amplifier in DIP-8 with 4-12V supply and adjustable gain from 20 to 200. The N-1 (250mW) and N-4 (1W) variants scale output power. For modern battery-powered designs, the PAM8302A Class-D amplifier offers 2.5W with 90% efficiency. For higher power, TDA2030A provides up to 18W in a 5-pin TO-220 package.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1