Opens in a new tab

LM3880MFX-1AE/NOPB

3-rail power sequencer, 2.7-5.5V, -1AE timing, open-drain, SOT-23-6

5340

Effective Inventory

Image for reference only

Manufacturer Part:

LM3880MFX-1AE/NOPB

Package:

SOT-23-6 (2.9 × 1.6 × 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM3880MFX-1AE/NOPB is a 3-rail simple power sequencer from Texas Instruments, packaged in a 6-pin SOT-23 (DBV) package. It provides controlled power-up and power-down sequencing of three voltage rails through open-drain output flags with fixed timing delays. The -1AE suffix defines the specific timing and sequence configuration, enabling easy cascading for up to 9 rails.

Key Specifications

Function 3-Rail Power Sequencer
Sequenced Rails 3
Supply Voltage 2.7V to 5.5V
IQ 25μA (typical)
Output Type Open-Drain
Sequence Configuration -1AE (factory set)
Cascadable Up to 9 rails (3 devices)
Package 6-pin SOT-23 (2.9 × 1.6 mm)
Operating Temperature -40°C to +125°C

Features

  • Simple 3-rail power sequencing with single enable input
  • Cascadable up to 9 rails using 3 devices
  • Independent power-up and power-down sequence control
  • Ultra-low quiescent current of 25μA
  • Open-drain outputs pull up to different voltage rails
  • EPROM-based timing configuration

Applications

  • FPGA power supply sequencing
  • Multi-rail processor power management
  • DSP and SoC system power control
  • Industrial control module sequencing
  • Telecom card power management
Product Introduction: LM3880MFX-1AE/NOPB Product Introduction

The LM3880 is a simple 3-rail power sequencer that provides controlled power-up and power-down sequencing of multiple voltage rails. When enabled, three open-drain output flags are sequentially released with fixed time delays, allowing connected power supplies to start in order. During power-down, the outputs follow the reverse sequence to avoid latch-up conditions. The -1AE suffix defines a specific timing and sequence configuration set at the factory via EPROM. The open-drain outputs can be pulled up to different voltage rails (up to VDD + 0.3V), providing flexibility in interfacing with various enable logic levels. Multiple LM3880 devices can be cascaded to sequence up to 9 rails.

Working Principle: LM3880MFX-1AE/NOPB Working Principle

The LM3880 operates as a state machine controlling three open-drain output flags (FLAG1, FLAG2, FLAG3). When the EN pin is driven high, the device begins the power-up sequence: FLAG1 releases first after the initial delay, then FLAG2 and FLAG3 release sequentially at their respective fixed timing intervals. Each open-drain output, when released, allows the external pull-up resistor to drive the connected power supply enable pin high. When EN goes low, the power-down sequence executes in reverse order (FLAG3, then FLAG2, then FLAG1) to ensure proper supply discharge and prevent latch-up. The timing delays are stored in internal EPROM, which can be custom-configured by TI for non-standard requirements. The precision enable threshold ensures reliable triggering from logic or resistor-divided voltage sources.

Pin Description: LM3880MFX-1AE/NOPB Pin Definition and Functions
Pin Name Type Function
1 VDD Power Supply voltage (2.7-5.5V)
2 GND Power Ground
3 EN Input Enable — precision threshold, high starts sequence
4 FLAG3 Output Open-drain output flag 3 (last in power-up)
5 FLAG2 Output Open-drain output flag 2
6 FLAG1 Output Open-drain output flag 1 (first in power-up)
Application Scenarios: In which products and applications is LM3880MFX-1AE/NOPB used
  • Sequencing 3.3V, 1.8V, and 1.0V rails for FPGA power
  • Multi-voltage DSP power-up/down control in telecom boards
  • SoC core, I/O, and PLL rail sequencing
  • Industrial controller power supply order management
  • Cascaded 9-rail sequencing for complex processor systems
Alternative Models: What chips are recommended as replacements for LM3880MFX-1AE/NOPB
Manufacturer Part Number Package Notes
TI LM3880MFX-3AE/NOPB SOT-23-6 Different timing configuration
TI TPS386600 VQFN-16 Quad supervisor with sequencing
ADI ADM1186 QSOP-16 4-channel sequencer/monitor
Maxim MAX16029 TDFN-10 Quad sequencer with timeout
Renesas ISL22316 QFN-16 6-channel sequencer

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1