Opens in a new tab

LM3914N

10-LED dot/bar display driver, 3-20V, programmable current, PDIP-18

5000

Effective Inventory

Image for reference only

Manufacturer Part:

LM3914N

Package:

PDIP-18 (23.5 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM3914N from Texas Instruments is a monolithic dot/bar display driver that senses an analog voltage and drives 10 LEDs in either bar-graph or moving-dot mode — the classic VU meter and battery indicator IC in an 18-pin PDIP package.

Key Specifications

Function Dot/Bar display driver (10-LED analog meter)
LED Channels 10 (independently driven)
Supply Voltage 3V to 20V (typical 5V-15V)
Internal Reference 1.25V (adjustable from 1.2V to 12V)
LED Current 2mA to 30mA (programmable via 1 resistor)
Input Voltage Range 0V to ±35V (protected)
Linearity 0.5% typical
Input Impedance >10MΩ (buffer input)
Display Mode Dot or Bar (pin 9 selects)
Cascading Up to 100 LEDs (10 chips)
Operating Temperature 0°C to +70°C
Package PDIP-18 (23.5 x 6.35mm)

Features

  • 10 independently driven LED outputs (current-regulated, open-collector)
  • Dot or Bar mode selectable via single pin
  • Internal precision voltage reference (adjustable)
  • Input buffer accepts signals down to ground (0V)
  • No LED resistors needed — current programmable
  • Cascadable for 20, 30, … 100 LED displays
  • Input withstands ±35V without damage

Applications

  • VU meters and audio level displays
  • Battery voltage indicators
  • Temperature gauges
  • Analog meter replacements
  • Expanded-scale meters
Product Introduction: LM3914N Product Introduction

The LM3914N from Texas Instruments is the industry-standard analog display driver that senses an analog voltage level and drives 10 LEDs to form a bar-graph or moving-dot display. A single pin (pin 9) selects the display mode: tied to V+ for bar mode (all LEDs up to the signal level light), or left open for dot mode (only one LED at the signal level lights). The internal 1.25V reference and precision 10-step resistor divider create 10 equally-spaced comparison thresholds. The LED current is set by a single external resistor connected to the reference output — no individual LED resistors needed. The reference voltage is adjustable from 1.2V to 12V using two external resistors, setting the full-scale input voltage. The input buffer has high impedance (>10MΩ) and accepts signals down to ground, making it compatible with single-supply systems. The LM3914 is incredibly easy to use: a basic 1.2V meter needs only 1 resistor, 10 LEDs, and a power supply. For battery indicators: connect input to battery voltage through a voltage divider; adjust reference for full-scale at the desired voltage. Multiple LM3914s can be cascaded for 20, 30, or more LED displays. The N suffix denotes the PDIP-18 package. Status: Discontinued (TI recommends checking alternatives).

Working Principle: LM3914N Working Principle

The LM3914N operates as follows: An input buffer (high-impedance voltage follower) receives the analog signal and drives 10 comparators. Each comparator has its inverting input connected to a different tap on an internal 10-step resistor divider. The resistor divider is biased by the internal 1.25V reference (adjustable via external resistors). When the input voltage exceeds a comparator’s threshold, that comparator’s output activates, sinking current through the corresponding LED. In bar mode (pin 9 tied to V+), all comparators below the signal level activate, creating a bar of lit LEDs. In dot mode (pin 9 open), only the highest activated comparator drives its LED, creating a single moving dot. The LED current is proportional to the current flowing out of the reference output pin: I_LED ≈ 10 × I_REF. By choosing the reference resistor, LED brightness is controlled without individual resistors. The internal reference develops 1.25V between REF OUT (pin 7) and REF ADJ (pin 8). Adding resistors from pin 8 to ground and pin 7 to pin 8 sets the reference voltage: V_REF = 1.25 × (1 + R2/R1) + 120µA × R2. This sets the full-scale voltage. The floating resistor divider means both ends (Rhi and Rlo) are accessible, allowing expanded-scale or zero-center meter configurations.

Pin Description: LM3914N Pin Definition and Functions
Pin Name Type Description
1 LED 1 Output LED 1 driver (open collector, current regulated)
2 V− Power Negative supply / Ground
3 V+ Power Positive supply (3V to 20V)
4 Rlo Input Lower end of resistor divider (connect to GND or offset voltage)
5 SIG Input Signal input (high impedance, accepts 0V to V+)
6 Rhi Input Upper end of resistor divider (connect to REF OUT for basic use)
7 REF OUT Output Reference output (1.25V, adjustable)
8 REF ADJ Input Reference adjust (connect resistor to GND)
9 MODE Input Mode select: tied to V+ = bar, open = dot
10 LED 10 Output LED 10 driver (open collector)
11 LED 9 Output LED 9 driver
12 LED 8 Output LED 8 driver
13 LED 7 Output LED 7 driver
14 LED 6 Output LED 6 driver
15 LED 5 Output LED 5 driver
16 LED 4 Output LED 4 driver
17 LED 3 Output LED 3 driver
18 LED 2 Output LED 2 driver
Application Scenarios: In which products and applications is LM3914N used
  • Simple VU Meter: Audio signal → rectifier → SIG (pin 5); Rhi to REF OUT; Rlo to GND; 10 LEDs on pins 1,18-10; MODE pin 9 to V+ (bar) or open (dot); 1 resistor sets LED current
  • Battery Indicator: Battery voltage → voltage divider → SIG; REF set for full-scale at charged voltage; LEDs: green=charged, yellow=mid, red=low
  • 20-LED Display: Two LM3914s; SIG of #2 = SIG of #1 (shifted by resistor divider); pin 9 of #1 → pin 1 of #2 for dot carry; bar mode for bar display
  • Expanded-Scale Meter: Rhi and Rlo set to a narrow voltage window (e.g., 11V-13V for 12V battery); 10 LEDs span only 2V range for high resolution
Alternative Models: What chips are recommended as replacements for LM3914N
Model Manufacturer Key Difference Package Specs
LM3915N TI Logarithmic version with 3dB/step for audio VU metering and signal strength displays DIP-18 3V-25V/log
LM3916N TI Semi-logarithmic version designed specifically for standard VU scale audio metering DIP-18 3V-25V/VU
LM3914V TI Same device in 20-pin PLCC surface-mount package for compact PCB assembly PLCC-20 3V-25V/linear
MAX7219 ADI SPI-controlled 8-digit LED display driver with individual segment dimming for multiplexed displays DIP-24 2.7-5.5V/SPI
HT16K33 Holtek I2C LED matrix driver with 16×8 multiplex for 7-segment and dot-matrix displays DIP-28 4.5-5.5V/I2C

LM3914N is a linear-scale dot/bar display driver that drives 10 LEDs proportional to an analog input voltage. LM3915 (logarithmic 3dB/step) and LM3916 (VU scale) are audio-optimized variants. All share the same DIP-18 pinout and support both dot and bar display modes. For digital control, MAX7219 and HT16K33 provide SPI/I2C LED driver alternatives with individual LED addressing.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1