Opens in a new tab

LM393N

Dual comparator, open-collector, 2-36V, GND input, PDIP-8

18000

Effective Inventory

Image for reference only

Manufacturer Part:

LM393N

Package:

PDIP-8 (9.81 x 6.35 x 5.08mm, 2.54mm pitch, through-hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM393N from Texas Instruments is a dual differential comparator with open-collector outputs, 2V-36V supply range, ground-including common-mode range, and low power consumption in a compact 8-pin PDIP package.

Key Specifications

Number of Comparators 2 (dual, independent)
Supply Voltage 2V to 36V (single) or ±1V to ±18V (dual)
Input Offset Voltage 2mV typical, 5mV max
Input Bias Current 25nA typical
Input Common-Mode Range 0V to V+−1.5V (includes ground)
Output Type Open-collector
Output Sink Current 6mA min, 16mA typical
Response Time 1.3µs typical
Supply Current (both) 0.4mA typical
Operating Temperature 0°C to +70°C
Package PDIP-8 (9.81 x 6.35mm)

Features

  • Two independent comparators in 8-pin DIP
  • Open-collector outputs for wired-AND
  • Input common-mode includes ground
  • Low offset voltage: 2mV typical
  • Low supply current: 0.4mA for both
  • TTL/CMOS compatible output

Applications

  • Voltage threshold detection
  • Window comparator
  • Oscillator circuits
  • Relay and LED driver
  • Sensor signal conditioning
Product Introduction: LM393N Product Introduction

The LM393N from Texas Instruments is the dual version of the LM339N, containing two independent comparators in a compact 8-pin PDIP package. It shares all the key characteristics of the LM339 family: open-collector outputs, ground-including input common-mode range, 2mV typical offset voltage, and 1.3µs response time. The smaller 8-pin package makes the LM393 ideal for applications needing only one or two comparators, saving board space compared to the 14-pin LM339. The open-collector outputs can be tied together for wired-AND logic — useful for window comparators where the output should be HIGH only when the input is within a specified range. The N suffix denotes the commercial temperature range (0°C to +70°C) in PDIP-8. For single-comparator applications, the TL331 (same family, one comparator, SOT-23) saves even more space.

Working Principle: LM393N Working Principle

Each comparator in the LM393N continuously monitors the voltage difference between its non-inverting (+) and inverting (−) inputs. When V+ > V−, the internal output transistor is OFF, and the open-collector output floats (appears HIGH through the external pull-up resistor). When V+ < V−, the output transistor turns ON, sinking current to ground and pulling the output LOW. The comparator has no internal hysteresis; adding positive feedback (a resistor from output to the non-inverting input) creates hysteresis that prevents output oscillation when the input signal is near the threshold. The input common-mode range includes ground, meaning both inputs can be at 0V without causing phase inversion or latch-up. The open-collector output requires a pull-up resistor to a supply voltage (which can be different from the comparator's VCC), enabling level translation: the comparator can run from 12V while the output pulls up to 5V for TTL logic compatibility.

Pin Description: LM393N Pin Definition and Functions
Pin Name Type Description
1 1OUT Output Comparator 1 output (open-collector)
2 1IN− Input Comparator 1 inverting input
3 1IN+ Input Comparator 1 non-inverting input
4 GND Power Ground
5 2IN+ Input Comparator 2 non-inverting input
6 2IN− Input Comparator 2 inverting input
7 2OUT Output Comparator 2 output (open-collector)
8 VCC Power Supply (2V to 36V)

LM393N uses the PDIP-8 package with standard dual comparator pinout: Pin 1 = Output A (open-collector), Pin 2 = Inverting Input A (-), Pin 3 = Non-inverting Input A (+), Pin 4 = GND, Pin 5 = Non-inverting Input B (+), Pin 6 = Inverting Input B (-), Pin 7 = Output B (open-collector), Pin 8 = VCC. The open-collector outputs require external pull-up resistors to VCC or a separate logic supply. This allows output level shifting — the pull-up voltage can differ from VCC. Maximum output sink current is 16mA. Input common-mode range includes ground. Pinout is identical to LM2903, LM393A, and LM2903V comparators. For surface-mount, LM393DR (SOIC-8) provides the same pinout.

Application Scenarios: In which products and applications is LM393N used
  • Window Comparator: Comp1: IN+=signal, IN−=upper limit; Comp2: IN−=signal, IN+=lower limit; outputs wired-AND; HIGH only when within window
  • RC Oscillator: Output feeds back to IN+ through resistor divider; RC on IN−; oscillates at ~1/(2×R×C×ln(3))
  • Sensor Threshold: IN+ = sensor voltage; IN− = reference (TL431 or divider); output drives relay or LED through transistor
  • Overcurrent Detect: IN+ = shunt voltage; IN− = threshold; output trips shutdown circuit when current exceeds limit
  • Level Shifter: Comparator at 12V supply; pull-up to 5V; converts 12V logic to 5V TTL-compatible output
Alternative Models: What chips are recommended as replacements for LM393N
Model Manufacturer Key Difference Package Specs
LM393AN TI Improved version with lower 2mV max offset voltage for precision threshold detection circuits DIP-8 1.3µs/2-36V
LM2903N TI Automotive-grade -40 to +125C version for under-hood and industrial comparator applications DIP-8 1.3µs/-40-125C
LM339N TI Quad comparator version (4 channels) in DIP-14 for multi-channel threshold detection DIP-14 1.3µs/4-ch
TLV3202AIDR TI High-speed 40ns dual comparator with push-pull output for fast signal detection SOIC-8 40ns/2.7-5.5V
LTC6702IS8 ADI Micro-power 18-bit configurable comparator with 200nA supply for battery monitoring SOIC-8 18-bit/200nA

LM393 is the industry-standard dual voltage comparator with open-drain output and 2-36V supply range. The 1.3µs response time suits general-purpose threshold detection. LM393AN offers lower offset voltage. LM339 provides 4 comparators in DIP-14. For high-speed applications, TLV3202 offers 40ns response with push-pull output at 2.7-5.5V supply.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1