Opens in a new tab

Home » Analog Linear ICs, Integrated Circuits ICs » LM4120IM5X-2.5/NOPB

LM4120IM5X-2.5/NOPB

2.5V precision Vref, 0.2% acc, 10ppm/C, 95uA Iq, SOT-23-5, -40 to 85C

15600

Effective Inventory

Image for reference only

Manufacturer Part:

LM4120IM5X-2.5/NOPB

Package:

SOT-23-5 (2.9×1.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Texas Instruments LM4120IM5X-2.5/NOPB is a 2.5V precision voltage reference with 0.2% initial accuracy and 10ppm/C drift. Low 95uA supply current and small SOT-23-5 package for precision measurement circuits.

Key Specifications

Output Voltage 2.5V
Initial Accuracy +/-0.2%
Temperature Drift 10 ppm/C max
Supply Current 95 uA typ
Output Current +/-5 mA
Input Voltage Range 2.8V to 5.5V
Output Noise 15 uVp-p @ 0.1-10Hz
Operating Temperature -40 to +85 C
Package SOT-23-5 (2.9×1.6mm)

Features

  • High precision +/-0.2% initial accuracy
  • Low 10ppm/C temperature drift
  • Ultra-low 95uA supply current
  • Low noise 15uVp-p
  • Output enable/disable pin
  • No external capacitor required

Applications

  • ADC and DAC voltage reference
  • Precision measurement bridge excitation
  • Sensor signal conditioning reference
  • Portable instrument calibration
Product Introduction: LM4120IM5X-2.5/NOPB Product Introduction

The LM4120IM5X-2.5/NOPB from Texas Instruments is a 2.5V precision series voltage reference with +/-0.2% initial accuracy and 10ppm/C maximum temperature drift in a SOT-23-5 surface-mount package. With only 95uA supply current and 15uVp-p low-frequency noise, it is designed for precision ADC/DAC reference and measurement applications. The output enable/disable pin allows power sequencing.

Working Principle: LM4120IM5X-2.5/NOPB Working Principle

The LM4120 uses a buried-zener bandgap reference core with precision laser-trimmed thin-film resistors for +/-0.2% initial accuracy. The curvature-correction circuit compensates for the nonlinear temperature dependence of the bandgap voltage, achieving 10ppm/C max drift. A high-gain error amplifier and series pass element buffer the reference core from load variations.

Pin Description: LM4120IM5X-2.5/NOPB Pin Definition and Functions
Pin Name Type Description
1 EN Input Enable (active high)
2 VOUT Output 2.5V reference output
3 GND Power Ground
4 NC – No connect
5 VIN Input Supply input (2.8-5.5V)
Application Scenarios: In which products and applications is LM4120IM5X-2.5/NOPB used
  • 16-bit ADC reference voltage
  • Precision strain gauge bridge excitation
  • Thermocouple cold-junction compensation
  • Portable multimeter calibration reference
Alternative Models: What chips are recommended as replacements for LM4120IM5X-2.5/NOPB
Model Manufacturer Key Difference
REF3025 TI 2.5V, 50ppm/C, lower cost
ADR381 ADI 2.5V, 9ppm/C, comparable

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1