Opens in a new tab

LM48511SQ

2.6W mono Class D audio amp w/ boost, filterless, 2.7-5.5V, WQFN-16

1340

Effective Inventory

Image for reference only

Manufacturer Part:

LM48511SQ

Package:

WQFN-16 (3.0 x 3.0 x 0.8 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM48511SQ from Texas Instruments is a mono 2.6W filterless Class D audio power amplifier with integrated boost converter in a 16-pin WQFN package. The internal boost converter generates the supply voltage from a 2.7V-5.5V input, enabling 2.6W output into 4 Ohm speaker from a single Li-ion cell.

Key Specifications

Topology Class D with Integrated Boost
Output Power 2.6W into 4 Ohm @ 10% THD
Input Voltage 2.7V to 5.5V
Boost Output 5.5V (internal)
Efficiency Up to 87% (Class D)
THD+N 0.05% @ 1W, 1kHz
PSRR 72 dB @ 217Hz
SNR 95 dB
Operating Temperature -40 to +85 C
Package WQFN-16 (3 x 3 mm)

Features

  • 2.6W into 4 Ohm from single Li-ion cell
  • Integrated 5.5V boost converter
  • Filterless Class D output (no LC filter needed)
  • 87% power efficiency
  • 72dB PSRR at 217Hz
  • 95dB SNR
  • 0.05% THD+N at 1W
  • Shutdown mode with 0.01uA current
  • Pop-and-click suppression
  • Short-circuit and thermal protection

Applications

  • Portable speakers
  • Mobile phones and tablets
  • Laptop audio
  • Portable gaming devices
Product Introduction: LM48511SQ Product Introduction

The LM48511SQ from Texas Instruments is a mono 2.6W filterless Class D audio power amplifier with an integrated 5.5V boost converter in a 3x3mm WQFN-16 package. The integrated boost converter generates a 5.5V internal supply from a 2.7V-5.5V input, enabling 2.6W output into a 4 Ohm speaker from a single Li-ion battery. The filterless Class D topology eliminates the external LC output filter, reducing component count and board area. With 87% efficiency, 72dB PSRR, 95dB SNR, and comprehensive protection, it delivers high-quality audio in portable devices.

Working Principle: LM48511SQ Working Principle

The LM48511 operates through four subsystems: (1) Boost Converter: An internal synchronous boost converter steps up the input voltage (2.7-5.5V) to a regulated 5.5V internal supply, providing the headroom needed for 2.6W output. The boost operates at 1.5MHz with internal compensation. (2) Class D Power Stage: A full-bridge Class D output stage switches at 300kHz, modulating the audio signal with PWM. The high switching frequency and integrated output filtering allow filterless operation with the speaker inductance serving as the reconstruction filter. (3) Audio Processing: Differential input architecture provides 72dB PSRR, rejecting supply noise from the boost converter. Pop-and-click suppression eliminates audible transients during power-up/down. (4) Protection: Thermal shutdown, output short-circuit protection, and overcurrent protection ensure reliable operation.

Pin Description: LM48511SQ Pin Definition and Functions
Pin Name Type Description
1 IN+ Input Non-inverting audio input
2 IN- Input Inverting audio input
3 SD Input Shutdown (active low)
4 VDD Power Input supply (2.7-5.5V)
5 SW Power Boost converter switch node
6 PVDD Power Boost output / Class D supply
7 OUT+ Output Bridge output positive
8 OUT- Output Bridge output negative
Application Scenarios: In which products and applications is LM48511SQ used
  • Portable Bluetooth speaker delivering 2.6W from single Li-ion cell with integrated boost
  • Mobile phone speaker amplifier with filterless Class D for compact PCB
  • Laptop audio subsystem with 72dB PSRR rejecting digital supply noise
  • Handheld gaming device audio with 87% efficiency for extended battery life
Alternative Models: What chips are recommended as replacements for LM48511SQ
Model Manufacturer Pout Boost Notes
LM48512SQ TI 2.6W Yes Similar, I2C volume
MAX98390EWJ+ ADI 3.2W Yes Higher power, DSP
TS3A227AE TI — — Audio jack detect
TPA2016D2YZR TI 2.8W No External supply needed

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1