Opens in a new tab

LM5117PMHX/NOPB

65V sync buck controller, 20A, 3.3A gate, current monitor, HTSSOP-20

3200

Effective Inventory

Image for reference only

Manufacturer Part:

LM5117PMHX/NOPB

Package:

20-Pin HTSSOP (6.5 x 6.4 x 1.0 mm with exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM5117PMHX/NOPB is a Texas Instruments 5.5V to 65V wide-input synchronous buck controller with analog current monitor. It features emulated peak current-mode control, 3.3A peak gate drives, programmable 50kHz-750kHz switching, diode emulation mode, and AEC-Q100 qualification. Packaged in 20-pin HTSSOP, -40C to +125C.

Key Specifications

Input Voltage 5.5 V to 65 V
Output Current Up to 20 A (external MOSFETs)
Switching Freq 50 kHz to 750 kHz
Gate Drive 3.3 A peak
VREF Accuracy 1.5%
Rating AEC-Q100 Grade 1

Features

  • 5.5V to 65V wide input range
  • Emulated peak current-mode control
  • 3.3A peak gate drives
  • Programmable 50kHz-750kHz
  • Analog current monitor output
  • Diode emulation for light-load efficiency
  • Hiccup mode overcurrent protection
  • AEC-Q100 Grade 1 automotive

Applications

  • Automotive and industrial DC-DC
  • Server and telecom POL
  • Battery-powered buck regulators
  • LED driver power supplies
Product Introduction: LM5117PMHX/NOPB Product Introduction

The LM5117PMHX/NOPB is a Texas Instruments wide-input synchronous buck controller designed for step-down regulation from high-voltage or widely varying input supplies. The 5.5V to 65V input range supports automotive 12V/24V/48V bus and industrial 48V systems. The emulated peak current-mode control reduces noise sensitivity while providing inherent line feed-forward and cycle-by-cycle current limiting. The 3.3A peak gate drives external N-channel MOSFETs with adaptive dead-time control for up to 20A output current. The unique analog current monitor output provides real-time average output current telemetry for power management and current limiting. A programmable switching frequency of 50kHz to 750kHz can be synchronized to an external clock. Diode emulation mode improves light-load efficiency. The AEC-Q100 Grade 1 qualification supports automotive applications to 125C. Packaged in 20-pin HTSSOP with exposed thermal pad.

Working Principle: LM5117PMHX/NOPB Working Principle

The LM5117 uses emulated current-mode control where an internal ramp generator emulates the inductor current ramp, eliminating the need for direct current sensing while reducing noise sensitivity at high input voltages. The emulated ramp is combined with the actual current sense signal from the external sense resistor or MOSFET RDS(on) to create a composite PWM comparator input. This allows reliable control of very small duty cycles in high step-down ratio applications. The high-side and low-side gate drivers use adaptive dead-time control, preventing shoot-through while minimizing body diode conduction losses. The analog current monitor (IMON pin) outputs a voltage proportional to average output current, enabling power metering and precision current limiting. The bias regulator generates VCC from VIN, with automatic switchover to an external bias supply for efficiency improvement. Hiccup mode current limit reduces thermal stress during sustained overloads.

Pin Description: LM5117PMHX/NOPB Pin Definition and Functions

20-pin HTSSOP with key pins: VIN (input), VCC (bias output), BOOT (bootstrap), HO/LO (high/low gate drives), SW (switch node), FB (feedback), COMP (error amp output), IMON (current monitor), RT (frequency set), SS (soft-start), UVLO (undervoltage lockout), DEM (diode emulation), EN (enable), AGND/PGND (grounds), and thermal pad. Refer to datasheet for complete 20-pin mapping.

Application Scenarios: In which products and applications is LM5117PMHX/NOPB used
  • Automotive 48V-to-12V buck converter with 65V input and current telemetry
  • Industrial 24V/48V POL regulator with emulated current mode for high step-down
  • Server and telecom 12V-to-1V high-current buck with external MOSFETs
  • Battery-powered buck regulator with diode emulation for light-load efficiency
Alternative Models: What chips are recommended as replacements for LM5117PMHX/NOPB
Model Manufacturer Key Difference
LM5117PSQ/NOPB TI WQFN-24 package
LM5118 TI Dual output version
LM5141 TI Similar, higher voltage
TPS40170 TI Similar wide-Vin controller

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1