Opens in a new tab

LM5146RHHR

Sync buck controller, 4.5-65V, 2.2MHz, VQFN-28

2600

Effective Inventory

Image for reference only

Manufacturer Part:

LM5146RHHR

Package:

VQFN-28

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Texas Instruments LM5146RHHR is a Sync buck controller, 4.5-65V, 2.2MHz, VQFN-28. It drives external N-channel MOSFETs for high-efficiency synchronous buck conversion in telecom, industrial, and automotive power systems.

Key Specifications

Input Voltage 4.5-65V
Switching Frequency 2.2MHz
Package VQFN-28

Features

  • External MOSFET drive for design flexibility
  • Current mode control
  • Adjustable switching frequency
  • Power good and enable functions

Applications

  • Telecom base station power
  • Industrial 24V/48V systems
  • Automotive infotainment power
  • Server and storage power supplies
Product Introduction: LM5146RHHR Product Introduction

The LM5146RHHR from Texas Instruments is a synchronous buck controller operating from 4.5-65V input with 2.2MHz switching frequency in a VQFN-28 package. It drives external N-channel MOSFETs for high-efficiency power conversion in telecom, industrial, and automotive applications.

Working Principle: LM5146RHHR Working Principle

The controller uses peak current mode control. An error amplifier compares the output voltage feedback with an internal reference. The error signal controls the peak inductor current through a PWM comparator. The high-side gate driver turns on the external high-side MOSFET, and the low-side driver controls the synchronous MOSFET. Adaptive dead-time control prevents shoot-through current.

Pin Description: LM5146RHHR Pin Definition and Functions
Pin Name Description
VIN Input voltage sense Analog input
SW Switch node Power
BOOT Bootstrap capacitor Supply
HG High-side gate drive Output
LG Low-side gate drive Output
FB Output voltage feedback Analog input
COMP Error amplifier output Analog
SS Soft-start Analog
Application Scenarios: In which products and applications is LM5146RHHR used
  • 48V telecom to point-of-load conversion
  • Industrial 24V bus to 5V/3.3V regulation
  • Automotive 12V battery to logic power
  • Server VRM multi-phase controller
Alternative Models: What chips are recommended as replacements for LM5146RHHR
Model Brand Vin Notes
ISL6520CBZ Renesas 5-12V Single output
NCP51111DR2G onsemi 4.5-65V Automotive grade
BD9G341AEFJ-E2 ROHM 7-36V Integrated driver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1