Opens in a new tab

LM5155XSS

65V boost/flyback/SEPIC controller, 2.2MHz, spread-spectrum, 100V/2A gate, ±1% Vref, WQFN-16

4500

Effective Inventory

Image for reference only

Manufacturer Part:

LM5155XSS

Package:

WQFN-16 (4.0 x 4.0 x 0.8mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM5155XSS is a 2.2MHz automotive-grade boost/flyback/SEPIC controller from Texas Instruments with 3.5V to 65V input range and 100V/2A gate driver. The spread-spectrum option (X suffix) reduces EMI. With 1µA shutdown current, ±1% reference accuracy, programmable soft start, and slope compensation, it supports high-power non-isolated and isolated power supply designs in a WQFN-16 (4x4mm) package.

Key Specifications

Topology Boost / Flyback / SEPIC Controller
Input Voltage 3.5V to 65V
Gate Drive Voltage 100V maximum / 2A peak
Switching Frequency 100kHz to 2.2MHz (resistor programmable)
Spread Spectrum Yes (X suffix, ±7% frequency dithering)
Reference Voltage 1V (±1% over temperature)
Quiescent Current (ON) 500µA typical
Shutdown Current 1µA typical
Duty Cycle Up to 92%
Control Mode Current mode (peak)
Slope Compensation Internal, programmable with Rslope
Soft Start Programmable (external capacitor)
VCC LDO 7.2V internal, bypassable for external bias
Enable/UVLO Adjustable with hysteresis
Protection OCP, OVP, thermal shutdown
Package WQFN-16 (4.0 x 4.0mm)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100

Features

  • 3.5V to 65V wide input voltage range
  • 100V/2A gate driver for external N-FET
  • Up to 2.2MHz switching frequency
  • Spread-spectrum frequency dithering (±7%) for EMI reduction
  • ±1% reference voltage accuracy
  • Current-mode control with programmable slope compensation
  • 1µA shutdown current
  • Adjustable UVLO with hysteresis
  • Programmable soft start
  • Output overvoltage and cycle-by-cycle overcurrent protection
  • Internal 7.2V VCC LDO (bypassable)
  • AEC-Q100 qualified

Applications

  • Automotive LED headlight boost drivers
  • Industrial PLC power supplies
  • Telecom 48V isolated flyback
  • SEPIC converters for battery-powered systems
  • Boost converters for automotive ADAS
  • Multi-output flyback for IGBT gate drivers
Product Introduction: LM5155XSS Product Introduction

The LM5155XSS is a high-performance non-synchronous boost/flyback/SEPIC controller from Texas Instruments designed for automotive and industrial power supply applications. It features a 3.5V to 65V input range and drives an external N-channel MOSFET with a 100V/2A gate driver, supporting output voltages up to 100V. The X suffix denotes the spread-spectrum feature, which dithers the switching frequency by ±7% to reduce peak EMI emissions — critical for passing automotive CISPR 25 radiated emissions tests. The 2.2MHz maximum switching frequency allows small inductors and places switching harmonics above the AM radio band. Current-mode control with programmable slope compensation ensures stable operation across wide input/output ranges. The ±1% reference accuracy provides tight output regulation. The 1µA shutdown current preserves battery life in always-connected automotive systems.

Working Principle: LM5155XSS Working Principle

The LM5155XSS uses peak current-mode control. In each switching cycle, the oscillator sets the RS flip-flop, turning on the external N-channel MOSFET. Current ramps in the inductor (boost) or primary winding (flyback), sensed by the CS pin through an external sense resistor. When the sensed current reaches the error amplifier’s command level (plus slope compensation), the flip-flop resets and the MOSFET turns off. The inductor current then flows through the output diode to the load. The error amplifier compares a fraction of the output voltage (via the FB pin) with the internal 1V reference, adjusting the peak current command to maintain regulation. Slope compensation (programmable via an external resistor from COMP to SLOPE) prevents sub-harmonic oscillation at duty cycles above 50%. The spread-spectrum feature modulates the oscillator frequency with a pseudo-random pattern, spreading the switching energy across a wider bandwidth and reducing peak EMI at any single frequency. The internal 7.2V VCC LDO can be bypassed by connecting an external supply to VCC for higher efficiency at high input voltages.

Pin Description: LM5155XSS Pin Definition and Functions
Pin Name Description
1 VIN Input supply (3.5V to 65V)
2 EN/UVLO Enable/UVLO adjust
3 RT Switching frequency programming resistor
4 SS Soft start capacitor
5 COMP Error amplifier output / loop compensation
6 SLOPE Slope compensation resistor
7 FB Feedback voltage (target 1V)
8 AGND Analog ground
9 CS Current sense input
10 PGND Power ground
11 GATE Gate driver output (to external N-FET)
12 VCC Internal 7.2V LDO output (bypass cap)
13 OV Output overvoltage sense
14 NC No connect
15 NC No connect
16 PG Power good output (open drain)
Application Scenarios: In which products and applications is LM5155XSS used
  • Automotive LED Headlight Boost: Boost the 12V battery to 48V at 2A for an LED headlight string. The 2.2MHz switching frequency places harmonics above the AM band, and the spread-spectrum feature reduces EMI peaks to pass CISPR 25 Class 5. The 100V gate driver supports the 48V output with margin. Current-mode control provides fast LED current regulation during automotive transients (ISO 7637 pulse testing).
  • 48V Telecom Isolated Flyback: Generate isolated ±12V at 1A from a 48V telecom bus using a flyback topology. The LM5155 drives the primary MOSFET; a coupled inductor provides isolation and multiple outputs. The ±1% reference ensures tight primary-side regulation. The 65V input rating accommodates the 48V ±20% input range (38V to 72V including transients).
  • SEPIC for Wide Input Battery: Build a SEPIC converter that accepts 6V to 36V (2S to 8S Li-ion) and delivers a regulated 12V at 2A. The SEPIC topology handles input voltages both above and below the output, unlike a boost converter. The spread-spectrum option reduces EMI that could interfere with sensitive RF circuits in the same enclosure.
Alternative Models: What chips are recommended as replacements for LM5155XSS
Model Vin Topologies Key Difference
LM5155SS 3.5-65V Boost/Flyback/SEPIC No spread spectrum
LM5156 3.5-65V Boost/Flyback/SEPIC Higher gate drive, HV start-up
LM5180 4-65V Flyback (integrated FET) Integrated 1.5A FET, lower power
MAX17597 4.5-60V Boost/Flyback ADI/Maxim, no spread spectrum

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1