Opens in a new tab

LM73606RNPT

6A synchronous buck, 3.5-36Vin, 1-18Vout, 2.2MHz, 25μA IQ, VQFN-HR-16

6123

Effective Inventory

Image for reference only

Manufacturer Part:

LM73606RNPT

Package:

VQFN-HR-16 (4 x 4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM73606RNPT from Texas Instruments is a 6A synchronous buck converter with 3.5V to 36V input range and adjustable output down to 1V. Operating at up to 2.2MHz switching frequency, it delivers high efficiency with integrated MOSFETs in a compact VQFN-HR (RNP) package.

Key Specifications

Input Voltage Range 3.5V to 36V
Output Voltage Range 1V to 18V (adjustable)
Maximum Output Current 6 A
Switching Frequency 200kHz to 2.2MHz (adjustable)
Topology Synchronous Buck
Quiescent Current 25 μA (typical, PFM mode)
Reference Voltage 1V (±1%)
Package VQFN-HR-16 (RNP)
Operating Temperature -40°C to +125°C

Features

  • Wide 3.5V to 36V input range for automotive and industrial power systems
  • 6A continuous output current with integrated high/low-side MOSFETs
  • Adjustable switching frequency from 200kHz to 2.2MHz for design flexibility
  • Ultra-low 25μA quiescent current in PFM mode for light-load efficiency
  • Forced PWM mode for noise-sensitive applications
  • Internal soft-start, power good output, and precision enable

Applications

  • Automotive infotainment and ADAS power supplies
  • Industrial 12V/24V bus point-of-load conversion
  • Embedded computing and FPGA core power
  • Telecom and networking equipment power rails
  • Battery-powered portable instruments
Product Introduction: LM73606RNPT Product Introduction

The LM73606RNPT from Texas Instruments is a 6A synchronous step-down voltage regulator with integrated high-side and low-side MOSFETs. It accepts input voltages from 3.5V to 36V and produces adjustable output voltages from 1V to 18V with ±1% reference accuracy. The device operates at adjustable switching frequencies from 200kHz to 2.2MHz, allowing optimization of efficiency, solution size, and EMI performance. In PFM mode, the quiescent current is only 25μA for high light-load efficiency, while forced PWM mode eliminates frequency variation for noise-sensitive applications. Internal soft-start, power good output, and comprehensive protection features make it a complete power solution for automotive, industrial, and telecom applications.

Working Principle: LM73606RNPT Working Principle

The LM73606 operates as a current-mode synchronous buck converter. (1) The control loop uses peak current-mode modulation where the error amplifier compares the FB pin voltage against the 1V internal reference, driving the COMP pin to control the duty cycle through the PWM comparator. The high-side MOSFET on-time is adjusted based on the inductor peak current sensed through the internal current sense circuit, providing cycle-by-cycle current limiting and fast transient response. (2) The integrated power stage consists of a high-side NMOS switch and a low-side NMOS synchronous rectifier, both optimized for low RDS(on) to minimize conduction losses at 6A output. The bootstrap circuit provides gate drive for the high-side FET. (3) The mode control logic selects between PFM mode for high efficiency at light loads (where switching cycles are skipped and IQ drops to 25μA) and forced PWM mode for constant-frequency operation regardless of load.

Pin Description: LM73606RNPT Pin Definition and Functions
Pin Name Function
1 BOOT Bootstrap capacitor for high-side gate drive
2 VIN Input supply voltage (3.5-36V)
3 EN Enable input (precision threshold)
4 PG Power good open-drain output
5 FB Voltage feedback input (1V reference)
6 AGND Analog ground
7 SS Soft-start programming pin
8 SYNC/MODE Frequency sync or mode selection
9-16 Various SW, PGND, FREQ, BIAS, VCC pins
Application Scenarios: In which products and applications is LM73606RNPT used
  • Automotive 12V/24V bus to 5V/3.3V point-of-load conversion for ADAS and infotainment
  • Industrial 24V to FPGA core voltage (1.0-1.2V) with 6A current capability
  • Telecom -48V (via pre-regulation) to intermediate rail conversion
  • Battery-powered instrumentation requiring wide input range and high efficiency
  • Networking equipment ASIC and processor core power rails
Alternative Models: What chips are recommended as replacements for LM73606RNPT
Model Manufacturer Key Difference
LM73606RRPR TI VQFN-HR package with wettable flanks
LM73605RNPT TI 5A version, same package
LM73606RNPR TI Automotive AEC-Q100 version
TPS54560BDDA TI 5A, 4.5-60V, HSOP-8
MAX17503ATP+ Maxim 2A, 60V, TSSOP-20

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1