Opens in a new tab

LM7809CT

9V 1A fixed positive voltage regulator, TO-220, thermal/short protection

8000

Effective Inventory

Image for reference only

Manufacturer Part:

LM7809CT

Package:

TO-220-3 (10.4 x 4.6 x 15.75mm, 2.54mm pitch, through-hole, metal tab for heatsink)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM7809CT from onsemi/Fairchild is a 3-terminal 1A positive voltage regulator that provides a fixed 9V output from an unregulated input — the 9V sibling in the LM78XX series in a TO-220 package.

Key Specifications

Output Voltage 9V (fixed, ±4% tolerance)
Output Current 1A (with heatsink)
Input Voltage Range 11.5V to 24V (recommended)
Maximum Input Voltage 35V
Dropout Voltage 2V @ IO = 1A
Quiescent Current 5-8 mA
Ripple Rejection 55-68 dB @ 120Hz
Short Circuit Current 230 mA
Peak Current 2.2A
Thermal Resistance RθJC = 5°C/W, RθJA = 65°C/W
Operating Temperature -40°C to +125°C
Package TO-220-3 (10.4 x 4.6mm, tab)

Features

  • Fixed 9V output, no external components needed
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • Output transistor safe-area compensation
  • Dropout voltage only 2V at full load

Applications

  • 9V power supply for battery-powered equipment
  • Guitar pedal power
  • Audio preamplifier supply
  • 9V logic supply from 12V battery
Product Introduction: LM7809CT Product Introduction

The LM7809CT from onsemi (formerly Fairchild) is a 3-terminal fixed positive voltage regulator providing a regulated 9V output at up to 1A. It is part of the industry-standard LM78XX family, sharing the same TO-220 package, pinout, and internal protection circuitry as the LM7805 and LM7812. The 9V output is particularly useful for powering 9V battery-operated equipment from a 12V supply (common in automotive and battery-backed systems), guitar effects pedals, and audio preamplifiers. Like all 78XX regulators, it requires only two external capacitors (0.33µF input, 0.1µF output) for stable operation. The 2V dropout voltage means the input must be at least 11V to maintain regulation at full load. The internal thermal shutdown protects against overheating (activates at ~150°C junction), and the short-circuit current limiter restricts output current to ~230mA during a fault. The TO-220 package with its metal tab can be heatsink-mounted for continuous 1A operation; without a heatsink, the package dissipates about 2W in free air. The CT suffix denotes the TO-220 package from onsemi.

Working Principle: LM7809CT Working Principle

The LM7809CT uses an internal bandgap reference, error amplifier, and series pass transistor to maintain a constant 9V output. The error amplifier compares a fraction of the output voltage (via an internal resistor divider) with the bandgap reference (~1.25V). If the output voltage drops below 9V, the error amplifier increases drive to the pass transistor, raising the output. If the output rises above 9V, the drive is reduced. The thermal protection circuit monitors the junction temperature: when it exceeds approximately 150°C, the pass transistor is turned off, preventing damage. The current limiter senses the voltage across an internal sense resistor in series with the pass transistor: when the voltage exceeds ~0.6V (corresponding to ~230mA in short-circuit condition), the drive is reduced to limit current. The safe-area protection reduces current limit as the input-output differential increases, keeping the pass transistor within its safe operating area. Input capacitor (0.33µF) prevents oscillation when the input source has high impedance; output capacitor (0.1µF) improves transient response.

Pin Description: LM7809CT Pin Definition and Functions
Pin Name Type Description
1 INPUT Power Input Unregulated input voltage. Must be at least 3.4V (Vout + Vdropout ≈ 3.4V) for proper regulation. Maximum 35V. Bypass with 0.33µF ceramic capacitor to GND if supply is more than 6 inches from the regulator.
2 GND Ground Common ground reference. The TO-220 tab is electrically connected to this pin and serves as the primary heat dissipation path. Use thermal compound and heatsink for currents above 500mA.
3 OUTPUT Power Output Regulated 0.9V DC output at up to 1A continuous current with ±4% tolerance. Bypass with 0.1µF ceramic capacitor to GND to improve transient response and output impedance. Do not apply external voltage higher than 0.9V to prevent reverse bias damage.

Pin assignment follows standard TO-220-3 layout: Pin 1 (left) = Input, Pin 2 (center) = Ground/Tab, Pin 3 (right) = Output, when viewed from the front with pins pointing down. The metal tab on the back is electrically connected to Pin 2 (GND) and must be insulated from the heatsink when the heatsink is not at ground potential. Output capacitance of 0.1µF is required for stability; input capacitance of 0.33µF is recommended when the input supply is remote.

Application Scenarios: In which products and applications is LM7809CT used
  • Basic 9V Supply: 12V battery → INPUT; GND to ground; 0.33µF input cap, 0.1µF output cap; OUTPUT = 9V regulated for guitar pedals
  • 12V to 9V Converter: 12V automotive → INPUT; OUTPUT = 9V for 9V-rated equipment; dropout 2V allows regulation from 12V (9V + 2V = 11V minimum)
  • Split Supply (±9V): LM7809CT for +9V; LM7909CT for -9V; center-tapped transformer; dual supply for op-amp circuits
  • Adjustable Output: Add resistor between GND and ground: VOUT = 9V + (IQ × R); or use LM317T for full adjustability
Alternative Models: What chips are recommended as replacements for LM7809CT
Model Manufacturer Key Difference Package Specs
LM7809ACT onsemi Tighter output tolerance: ±2% vs ±4% for precision power supply applications TO-220-3 0.9V/1A
L7809CV STMicroelectronics Direct equivalent with 1.5A output current, internal thermal shutdown and current limiting TO-220-3 0.9V/1.5A
MC7809CTG onsemi Current production replacement with identical electrical specifications and RoHS compliance TO-220-3 0.9V/1A
KA7809 onsemi/Fairchild Budget-friendly version with ±4% tolerance and standard 1A output current rating TO-220-3 0.9V/1A
MC7809ABD2TG onsemi Surface-mount DPAK version with ±2% A-grade tolerance for compact PCB layouts DPAK-3 0.9V/1A
LM2940CT-0.9 TI Low-dropout version with 0.5V max dropout at 1A for battery-powered and automotive systems TO-220-3 0.9V/1A LDO

LM7809CT is a 0.9V fixed positive voltage regulator in TO-220-3 with 1A output and ±4% tolerance. The ACT suffix offers ±2% precision. For surface-mount designs, use MC7809ABD2TG (DPAK). For battery-powered systems, the LM2940CT-0.9 LDO version reduces dropout to 0.5V. All 7809 variants are pin-compatible (IN-GND-OUT) and require only input/output capacitors.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1