Opens in a new tab

LM7912CT

-12V 1A negative linear regulator, TO-220, thermal/SCP protection

8000

Effective Inventory

Image for reference only

Manufacturer Part:

LM7912CT

Package:

TO-220-3 (10.16 x 4.7 x 20.4mm, through-hole, tab=GND)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM7912CT from onsemi is a 3-terminal 1A negative voltage regulator providing a fixed -12V output with internal thermal shutdown and short-circuit protection in a TO-220 package — the negative complement to the LM7812CT for split-rail supplies.

Key Specifications

Output Voltage -12V fixed (±4% at 25°C)
Output Current 1A continuous
Input Voltage Range -14.5V to -35V
Dropout Voltage 2V typical @ 1A
Line Regulation 10mV typical
Load Regulation 15mV typical
Quiescent Current 3mA typical
Ripple Rejection 60dB typical @ 120Hz
Operating Temperature -40°C to +125°C (junction)
Package TO-220-3 (through-hole, tab=GND)

Features

  • Fixed -12V output
  • 1A continuous output current
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • 60dB ripple rejection
  • Complement to LM7812CT (+12V)

Applications

  • ±12V split power supply
  • Op-amp negative rail
  • RS-232 negative supply
  • Audio amplifier ±12V
Product Introduction: LM7912CT Product Introduction

The LM7912CT from onsemi is the negative-voltage counterpart of the LM7812CT, providing a fixed -12V output at up to 1A. Together, the LM7812 (+12V) and LM7912 (-12V) form a complete ±12V split power supply, which is the standard supply voltage for operational amplifiers (NE5532, TL072, LM741), analog switches, and many other linear ICs. The negative regulator operates with a negative input voltage: the input must be more negative than -14.5V (at least 2.5V below -12V) to maintain regulation. The pinout differs from the 78XX: pin 1 is GND (not input), pin 2 is input (not GND), pin 3 is output. This pinout difference is critical — inserting a 7912 in a 7812 socket will damage the device. The tab is connected to GND (same as 7812), so both can share a common heatsink without electrical isolation. The CT suffix denotes the TO-220 package.

Working Principle: LM7912CT Working Principle

The LM7912CT operates identically to the LM7812CT but with all voltages negated. It uses a series pass transistor between the negative input and the -12V output, controlled by a feedback loop comparing the output voltage with an internal reference. When the output rises above -12V (toward 0V), the pass transistor is driven harder to pull the output more negative. When the output drops below -12V, the drive is reduced. The thermal protection disables the output when the junction temperature exceeds ~175°C. The current limiting restricts output during a short circuit. The 60dB ripple rejection attenuates input ripple by a factor of ~1000. Power dissipation: Pd = |VIN − VOUT| × IOUT = |-18V − (-12V)| × 1A = 6W, requiring a heatsink similar to the LM7812. Important: both input and output capacitors are required for stability — a 2.2µF tantalum at the input and 1µF at the output are recommended, placed close to the regulator.

Pin Description: LM7912CT Pin Definition and Functions
Pin Name Type Description
1 GND Ground Common ground reference. The TO-220 tab is electrically connected to this pin. Note: 79xx negative regulators have GROUND on Pin 1 (opposite to 78xx where Input is Pin 1). Heatsink tab must be insulated when not at ground potential.
2 INPUT Power Input Negative unregulated input voltage. Must be more negative than -1.2V – Vdropout (at least -3.2V input). Maximum -35V. Bypass with 2.2µF electrolytic or 0.33µF ceramic capacitor to GND.
3 OUTPUT Power Output Regulated -1.2V DC output at up to 1.5A continuous current with ±4% tolerance. Bypass with 1µF tantalum or 10µF electrolytic capacitor to GND for stability. Do not apply positive voltage to output to prevent damage.

Critical note: 79xx negative regulators have DIFFERENT pin assignments from 78xx positive regulators. Pin 1 = GND (not Input), Pin 2 = Input (not GND), Pin 3 = Output. This pin swap is a common source of design errors. The tab is connected to GND (Pin 1). Always verify pinout against the datasheet before PCB layout.

Application Scenarios: In which products and applications is LM7912CT used
  • ±12V Op-Amp Supply: Transformer center-tap → GND; positive winding → bridge+filter → LM7812CT (+12V); negative winding → bridge+filter → LM7912CT (-12V); clean ±12V for NE5532, TL072, LM741
  • RS-232 Supply: LM7912CT provides -12V for MAX232 charge pump; combined with LM7812CT +12V
  • Audio Amplifier: ±12V rails from LM7812+LM7912; Class-AB push-pull output stage; symmetrical clipping
Alternative Models: What chips are recommended as replacements for LM7912CT
Model Manufacturer Key Difference Package Specs
LM7912ACT onsemi Tighter output tolerance: ±2% vs ±4% for precision negative supply rails TO-220-3 -1.2V/1A
L7912CV STMicroelectronics Direct equivalent with 1.5A output current and internal thermal/current protection TO-220-3 -1.2V/1.5A
MC7912CTG onsemi Current production replacement with RoHS compliance and identical specifications TO-220-3 -1.2V/1A
KA7912 onsemi/Fairchild Budget-friendly version with ±4% tolerance for cost-sensitive negative supply designs TO-220-3 -1.2V/1A
LM337T TI Adjustable -1.25V to -37V version providing flexible output voltage with two external resistors TO-220-3 -1.25 to -37V adj

LM7912CT is a -1.2V fixed negative voltage regulator in TO-220-3 with 1A output and ±4% tolerance. For adjustable negative voltage, the LM337T provides -1.25V to -37V output. All 7912 variants share the same pinout (GND-IN-OUT) and are complementary to the 7812 positive regulators for split-rail supplies.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1