Opens in a new tab

LM7912CT

-12V 1A negative linear regulator, TO-220, thermal/SCP protection

4969

Effective Inventory

Image for reference only

Manufacturer Part:

LM7912CT

Package:

TO-220-3 (15.6 x 10.6 x 4.6mm, through-hole, tab=GND)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM7912CT from onsemi/TI is a 3-terminal 1A negative voltage regulator providing a fixed -12V output with internal thermal shutdown, short-circuit protection, and safe operating area compensation in a TO-220 package.

Key Specifications

Output Voltage -12V fixed (±4% tolerance)
Output Current 1A continuous (1.5A peak)
Input Voltage Range -14.5V to -27V (for regulation)
Maximum Input Voltage -35V
Dropout Voltage 1.1V typical @ 1A (TI version)
Line Regulation 10mV typical (TI version)
Load Regulation 12mV typical (5mA to 1A)
Quiescent Current 1-2mA typical
Ripple Rejection 54-60dB typical @ 120Hz
Short-Circuit Current 300mA typical
Peak Output Current 2.2A typical
Operating Temperature 0°C to +125°C (junction)
Package TO-220-3 (through-hole)

Features

  • Fixed -12V output
  • 1A continuous output current
  • Internal thermal shutdown protection
  • Internal short-circuit current limiting
  • Safe operating area compensation
  • High ripple rejection: 54-60dB
  • Complements LM7812 for ±12V supplies

Applications

  • Negative 12V power supply rail
  • Op-amp dual supply (with LM7812)
  • Analog circuit negative rail
  • RS-232 negative supply generation
  • Audio amplifier split supply
Product Introduction: LM7912CT Product Introduction

The LM7912CT from onsemi/Texas Instruments is a 3-terminal negative voltage regulator providing a fixed -12V output at up to 1A load current. It is the negative-voltage complement to the LM7812CT, and together they form a complete ±12V split power supply from a center-tapped transformer. The LM7912 requires an input bypass capacitor (2.2µF tantalum or 25µF aluminum) at the input and a 1µF output capacitor for stability—larger values than the LM7812 due to the negative regulator architecture. Internal protection includes thermal shutdown, short-circuit current limiting, and safe operating area compensation. The pinout differs from the 78xx series: pin 1 is Ground (tab), pin 2 is Input, and pin 3 is Output. The CT suffix denotes the TO-220 through-hole package. Note: TI lists this part as Last Time Buy; the MC7912CTG from onsemi is the current production equivalent.

Working Principle: LM7912CT Working Principle

The LM7912CT uses a series pass transistor between the negative input and the output, controlled by a feedback loop that maintains VOUT = -12V. The error amplifier compares a divided version of the output voltage with an internal reference. When the output becomes less negative (rises toward 0V), the error amplifier drives the pass transistor harder, pulling the output more negative. When the output becomes too negative, the drive is reduced. The negative regulator architecture requires the tab to be connected to ground (not the output), which simplifies heatsink mounting since the tab can be directly attached to the chassis ground. The larger required bypass capacitors (2.2µF input, 1µF output, both tantalum recommended) are needed because the negative regulator has different loop dynamics than the positive 78xx series. The quiescent current flows from the output through the ground pin to the reference, which is why the ground pin current varies with load. The thermal shutdown activates at approximately 170°C junction temperature, and the current limit is approximately 300mA during a short circuit, significantly lower than the 78xx series.

Pin Description: LM7912CT Pin Definition and Functions
Pin Name Type Description
1 GND Ground Common ground reference. The TO-220 tab is electrically connected to this pin. Note: 79xx negative regulators have GROUND on Pin 1 (opposite to 78xx where Input is Pin 1). Heatsink tab must be insulated when not at ground potential.
2 INPUT Power Input Negative unregulated input voltage. Must be more negative than -1.2V – Vdropout (at least -3.2V input). Maximum -35V. Bypass with 2.2µF electrolytic or 0.33µF ceramic capacitor to GND.
3 OUTPUT Power Output Regulated -1.2V DC output at up to 1.5A continuous current with ±4% tolerance. Bypass with 1µF tantalum or 10µF electrolytic capacitor to GND for stability. Do not apply positive voltage to output to prevent damage.

Critical note: 79xx negative regulators have DIFFERENT pin assignments from 78xx positive regulators. Pin 1 = GND (not Input), Pin 2 = Input (not GND), Pin 3 = Output. This pin swap is a common source of design errors. The tab is connected to GND (Pin 1). Always verify pinout against the datasheet before PCB layout.

Application Scenarios: In which products and applications is LM7912CT used
  • ±12V Split Supply: Center-tapped transformer → bridge rectifier → LM7812CT (+12V) and LM7912CT (-12V); dual rail for op-amps
  • Op-Amp Rail: -12V rail for NE5532/LM358 circuits; 54dB ripple rejection ensures clean analog supply
  • RS-232 Supply: -12V rail for MAX232 V- pin (if not using charge pump); or as -12V reference
  • Audio Amp: -12V rail for TDA2030A negative supply; paired with LM7812CT for ±12V
  • Test Equipment: Negative rail for DAC/ADC reference circuits; stable -12V with 12mV load regulation
Alternative Models: What chips are recommended as replacements for LM7912CT
Model Manufacturer Key Difference Package Specs
LM7912ACT onsemi Tighter output tolerance: ±2% vs ±4% for precision negative supply rails TO-220-3 -1.2V/1A
L7912CV STMicroelectronics Direct equivalent with 1.5A output current and internal thermal/current protection TO-220-3 -1.2V/1.5A
MC7912CTG onsemi Current production replacement with RoHS compliance and identical specifications TO-220-3 -1.2V/1A
KA7912 onsemi/Fairchild Budget-friendly version with ±4% tolerance for cost-sensitive negative supply designs TO-220-3 -1.2V/1A
LM337T TI Adjustable -1.25V to -37V version providing flexible output voltage with two external resistors TO-220-3 -1.25 to -37V adj

LM7912CT is a -1.2V fixed negative voltage regulator in TO-220-3 with 1A output and ±4% tolerance. For adjustable negative voltage, the LM337T provides -1.25V to -37V output. All 7912 variants share the same pinout (GND-IN-OUT) and are complementary to the 7812 positive regulators for split-rail supplies.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1