Opens in a new tab

LMR33630ADDAR

3.8-36V input, 3A synchronous buck converter, 400kHz/1.4MHz/2.1MHz, SOIC-8

7500

Effective Inventory

Image for reference only

Manufacturer Part:

LMR33630ADDAR

Package:

8-SOIC PowerPAD (4.90 x 3.91 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMR33630ADDAR is a Texas Instruments SIMPLE SWITCHER 3.8 V to 36 V, 3 A synchronous step-down voltage converter. It features integrated 75 mΩ/50 mΩ MOSFETs, peak efficiency >95%, 25 µA operating quiescent current, and switching frequencies of 400 kHz, 1.4 MHz, or 2.1 MHz. The device is packaged in an 8-pin HSOIC (DDA) with thermal pad rated for -40°C to +125°C.

Key Specifications

Input Voltage 3.8 V to 36 V
Output Current 3 A
Output Voltage 1 V to 24 V
RDS(on) (HS/LS) 75 mΩ / 50 mΩ
IQ (operating) 25 µA
Peak Efficiency >95%

Features

  • 3.8 V to 36 V input range
  • 3 A continuous output current
  • 75 mΩ / 50 mΩ integrated MOSFETs
  • Peak efficiency >95%
  • 25 µA operating quiescent current
  • Auto PFM/PWM mode for light-load efficiency
  • Power-good flag and precision enable
  • Internal loop compensation

Applications

  • Industrial 24V power distribution
  • Factory automation and control
  • Test and measurement equipment
  • Battery-powered industrial devices
Product Introduction: LMR33630ADDAR Product Introduction

The Texas Instruments LMR33630ADDAR is a 3A synchronous step-down converter with a wide 3.8V to 36V input range, making it suitable for industrial, automotive, and communications applications powered from 5V, 12V, or 24V bus rails. The integrated 75 mOhm high-side and 50 mOhm low-side MOSFETs achieve peak efficiency above 95%, eliminating external FETs and reducing solution footprint. Three switching frequency options (400 kHz, 1.4 MHz, 2.1 MHz) allow designers to trade off efficiency against inductor size—the 2.1 MHz option enables compact designs with small ceramic capacitors and low-profile inductors. The 68 ns minimum on-time supports high step-down ratios at high frequencies (e.g., 24V to 1V at 2.1 MHz). The HotRod QFN package minimizes EMI by routing the switching current paths internally, reducing the loop area that causes radiated emissions. The 25 uA operating quiescent current in PFM mode maintains high efficiency at light loads. Functional safety documentation is available for systems requiring IEC 61508 compliance. The device includes power-good output, precision enable threshold, and pre-bias start-up capability.

Working Principle: LMR33630ADDAR Working Principle

The LMR33630 uses peak-current-mode control with a high-side current-sense comparator that monitors the inductor current through the integrated high-side MOSFET. The error amplifier compares the output voltage (sensed at the FB pin through a resistor divider) with the internal 1V reference and generates a control voltage that sets the peak inductor current. The internal oscillator generates the switching clock, and the PWM comparator trips when the sensed current reaches the control voltage, turning off the high-side FET and turning on the low-side FET. At light loads, the device automatically enters pulse-frequency modulation (PFM) mode, skipping switching cycles to reduce switching losses and maintain efficiency above 80% at loads below 10 mA. The integrated compensation network eliminates the need for external compensation components, simplifying design. The 68 ns minimum on-time allows high step-down ratios without pulse skipping, even at 2.1 MHz switching frequency. The power-good (PG) flag indicates when the output is within 90-110% of the target voltage, enabling downstream circuits to be released from reset in a controlled sequence.

Pin Description: LMR33630ADDAR Pin Definition and Functions
Pin Mnemonic Description
1 PG Power-good open-drain output
2 RT/SYNC Frequency programming resistor or external clock sync
3 EN Enable input (precision threshold 1.05V)
4 VIN Input supply (3.8-36V)
5 SW Switching node (connect to inductor)
6 GND Ground and PowerPAD
7 FB Feedback input (1V reference)
8 BOOT Bootstrap capacitor for high-side driver
Application Scenarios: In which products and applications is LMR33630ADDAR used
  • 24V industrial bus to 5V/3A power supply with >95% peak efficiency and PFM mode maintaining >80% efficiency at 50mA load
  • Automotive 12V battery to 3.3V MCU supply with 2.1MHz switching frequency minimizing EMI in the AM radio band
  • Functional safety-rated PLC I/O module with power-good monitoring and pre-bias start-up for output voltage sequencing
  • Communications equipment 48V (via pre-regulator) to 1.2V/3A FPGA core supply with 68ns minimum on-time
  • Alternative Models: What chips are recommended as replacements for LMR33630ADDAR
    Model Manufacturer Key Difference
    LMR33620ADDAR TI 2A version, same package and pinout
    LMR36015 TI 1.5A, 4.2-60V input, higher voltage range
    TPS54560BDDA TI 5A, 4.5-60V, larger package, non-synchronous
    MAX17503 Maxim 3.5A, 4.5-36V, integrated inductor option

    Recommend Parts

    TMP275AIDR

    0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

    Brand: TI

    Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

    IN STOCK: 3681pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IL485E

    NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

    Brand: nve

    Package: SOIC-16 WB

    IN STOCK: 5280pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRFS4227TRLPBF

    IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

    Brand: infineon

    Package: D2PAK (TO-263)

    IN STOCK: 4334pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    CD4070BM96

    Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

    Brand: TI

    Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

    IN STOCK: 4245pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AB1526

    Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

    Brand: airoha

    Package: BGA

    IN STOCK: 25000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LP2980IM5-5.0

    50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

    IN STOCK: 2557pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1