Opens in a new tab

LMZ34002RKGR

4.5-40V Input, 2A Negative Output Power Module, -3V to -17V, QFN-41

4521

Effective Inventory

Image for reference only

Manufacturer Part:

LMZ34002RKGR

Package:

B1QFN-41 (9 x 11 x 2.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMZ34002RKGR from Texas Instruments is a SIMPLE SWITCHER negative output power module that integrates a 15W DC-DC converter with a shielded inductor in a compact QFN-41 package. It supports an input voltage range of 4.5 V to 40 V and provides an adjustable negative output voltage from -3 V to -17 V at up to 2 A output current. The module requires only five external components, simplifying design.

Key Specifications

Topology Buck-Boost (Inverting)
Input Voltage 4.5 V to 40 V
Output Voltage -3 V to -17 V (Adjustable)
Output Current 2 A
Switching Frequency 800 kHz (typical)
Efficiency Up to 86%
Surge Voltage 45 V
Package B1QFN-41 (9 x 11 x 2.8 mm)
Operating Temperature -40°C to 85°C
Thermal Impedance 14°C/W

Features

  • Complete integrated power solution with shielded inductor
  • Wide 4.5 V to 40 V input voltage range with 45 V surge capability
  • Adjustable negative output from -3 V to -17 V
  • Output current up to 2 A (15W)
  • Synchronization with external clock
  • Adjustable slow start
  • Programmable undervoltage lockout (UVLO)
  • Output overcurrent protection
  • Overtemperature protection with thermal shutdown
  • EN55022 Class B radiated emissions compliance

Applications

  • Negative voltage rails for op-amps and data converters
  • Industrial and medical instrumentation
  • Test and measurement equipment
  • Telecom power distribution
  • Optical module bias supplies
Product Introduction: LMZ34002RKGR Product Introduction

The LMZ34002RKGR is a SIMPLE SWITCHER power module from Texas Instruments designed to generate negative output voltages with minimal external components. It integrates a complete DC-DC converter including a shielded inductor in a compact 9 x 11 mm QFN package. The module accepts 4.5 V to 40 V input and produces an adjustable negative output from -3 V to -17 V at up to 2 A. Only five external components are required, eliminating loop compensation and magnetic component selection challenges. The integrated shielded inductor ensures EN55022 Class B EMI compliance and simplifies PCB layout.

Working Principle: LMZ34002RKGR Working Principle

The LMZ34002RKGR operates as a buck-boost (inverting) converter. The input voltage is applied across an internal power MOSFET and the integrated shielded inductor. During the ON-time, current builds in the inductor through the high-side switch. During the OFF-time, the inductor current flows through the low-side switch to the output capacitor and load, generating a negative output voltage. The controller uses voltage-mode control with input voltage feedforward for line regulation. An internal oscillator runs at 800 kHz (typical), and the device can be synchronized to an external clock. Protection circuits include cycle-by-cycle current limiting, output overcurrent protection, undervoltage lockout, and overtemperature shutdown.

Pin Description: LMZ34002RKGR Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input voltage supply
2 EN Input Enable (active high)
3 SS/TRK Input Soft-start / tracking
4 SYNC Input External clock synchronization
5 PGOOD Output Power good indicator
6 VADJ Input Output voltage adjust feedback
7 GND Ground Signal ground
8-41 OUT/GND/PAD Power/Ground Output, ground, and thermal pad connections
Application Scenarios: In which products and applications is LMZ34002RKGR used
  • Negative supply rails for precision op-amps and ADCs/DACs
  • Industrial control systems requiring bipolar supplies
  • Medical instrumentation with isolated negative outputs
  • Telecom line driver bias supplies Optical transceiver and RF amplifier bias
Alternative Models: What chips are recommended as replacements for LMZ34002RKGR
Manufacturer Part Number Package Notes
Texas Instruments LMZ34003RKGR QFN-41 3A version, same footprint
TI LMZ13610 TO-PMOD-7 10A positive output module
Analog Devices LTM8045 BGA-25 Inverting uModule, 2.8V to 18V out
Monolithic Power MPM3632C QFN-22 3A, 3.3V to 21V in, positive output
CUI Inc PQB10-S5-DIN DIP Isolated DC-DC, 5V output

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1