Opens in a new tab

LP5562TME/NOPB

4-ch RGB/W LED driver, I2C, 25.5mA/ch, 8-bit PWM+current, DSBGA-12, autonomous patterns

7400

Effective Inventory

Image for reference only

Manufacturer Part:

LP5562TME/NOPB

Package:

DSBGA-12 (1.55 x 1.55 x 0.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LP5562TME/NOPB from Texas Instruments is a 4-channel RGB/White LED driver with internal program memory and independent channel control in a DSBGA-12 package. Each channel provides 8-bit PWM and 8-bit current control (0-25.5mA in 100uA steps), with three programmable execution engines for autonomous lighting patterns.

Key Specifications

Number of Channels 4 (R, G, B, White)
LED Current Range 0 to 25.5 mA per channel (100uA steps)
PWM Resolution 8-bit per channel
Current Matching 1% (typical)
Output Saturation Voltage 60 mV (typical)
Supply Voltage 2.7 V to 5.5 V
Interface I2C (up to 400kHz)
Program Engines 3 independent
Operating Temperature -40C to +85C

Features

  • 4 independently programmable LED channels with 8-bit PWM and 8-bit current control
  • Three program execution engines for autonomous lighting patterns
  • Internal SRAM program memory for pattern storage
  • 60mV typical saturation voltage minimizes headroom requirement
  • 1% current matching between channels for consistent color
  • Automatic power-save mode with external clock

Applications

  • RGB LED lighting and effects in mobile devices
  • Indicator and notification LED control
  • Wearable device RGB illumination
  • Portable electronics ambient lighting
Product Introduction: LP5562TME/NOPB Product Introduction

The LP5562TME/NOPB from Texas Instruments is a 4-channel RGB or White LED driver with internal program memory in an ultra-compact DSBGA-12 (1.55×1.55mm) package. Each of the four channels provides independent 8-bit current control (0 to 25.5mA in 100uA steps) and 8-bit PWM control. Current matching between channels is 1% typical with 60mV saturation voltage. Three program execution engines with flexible instruction sets allow autonomous lighting pattern execution without host processor intervention. Programs are stored in internal SRAM. The device communicates via I2C at up to 400kHz, and enters automatic power-save mode when an external clock is provided.

Working Principle: LP5562TME/NOPB Working Principle

The LP5562TME/NOPB integrates four independent current sinks with PWM modulation and three program execution engines. (1) Current Control: Each channel has an 8-bit current DAC that sets the maximum LED current from 0 to 25.5mA in 100uA steps. The current sink topology allows common-anode LED connection. (2) PWM Control: An 8-bit PWM modulator on each channel controls the duty cycle, enabling 256 brightness levels. The combination of current and PWM control provides over 65,000 color combinations. (3) Program Engines: Three independent execution engines can simultaneously run lighting programs stored in the 48-entry SRAM. Each engine has its own program counter and can control one or more channels with ramp, branch, and delay instructions. (4) I2C Interface: The host writes channel settings and programs via the I2C interface at up to 400kHz. Once programmed, the engines operate autonomously. (5) Power Save: When an external clock is provided on the CLK pin, the device synchronizes its internal oscillator and enters power-save mode during idle periods.

Pin Description: LP5562TME/NOPB Pin Definition and Functions
Pin Name Type Function
A1 SDA I/O I2C data
A2 SCL Input I2C clock
A3 VDD Power Supply voltage (2.7-5.5V)
B1 EN Input Chip enable (active high)
B2 CLK Input External clock input (32kHz)
B3 GND Ground Ground reference
C1 OUTB Output Blue LED current sink
C2 OUTG Output Green LED current sink
C3 OUTR Output Red LED current sink
D1 OUTW Output White LED current sink
Application Scenarios: In which products and applications is LP5562TME/NOPB used
  • RGB LED lighting and effects in smartphones and mobile devices
  • Indicator and notification LED control with autonomous pattern execution
  • Wearable device RGB illumination in ultra-compact DSBGA package
  • Portable electronics ambient and accent lighting with I2C control
Alternative Models: What chips are recommended as replacements for LP5562TME/NOPB
Manufacturer Part Number Package Notes
TI LP5560TMX/NOPB DSBGA-12 3-channel version
TI LP5523TMX/NOPB DSBGA-16 9-channel RGB driver
Analog Devices ADP8866ACPZ WLCSP-12 4-ch LED driver
onsemi CAT3649V-GT2 TQFN-16 4-ch RGB LED driver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1