Opens in a new tab

LPC1115FBD48/303

ARM Cortex-M0 MCU, 64KB flash, 8KB SRAM, 50MHz, LQFP-48, XL series

7800

Effective Inventory

Image for reference only

Manufacturer Part:

LPC1115FBD48/303

Package:

LQFP-48 (7.0 × 7.0 × 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LPC1115FBD48/303 from NXP Semiconductors is a 32-bit ARM Cortex-M0 microcontroller in a 48-pin LQFP package, featuring 64 kB flash, 8 kB SRAM, 50 MHz maximum CPU frequency, and a rich peripheral set including UART, I2C, SPI, 10-bit ADC, and 42 GPIO pins. The /303 suffix denotes the LPC1100XL series with windowed watchdog timer and configurable open-drain mode.

Key Specifications

Core ARM Cortex-M0
Max CPU Frequency 50 MHz
Flash Memory 64 kB
SRAM 8 kB
GPIO 42 pins
Serial Interfaces 1× UART, 1× I2C, 2× SPI/SSP
Timers 2× 16-bit, 2× 32-bit
PWM 2× 16-bit
ADC 10-bit, 8-channel
Supply Voltage 1.8 V to 3.6 V
Operating Temperature -40°C to +85°C
Package LQFP-48 (7 × 7 × 1.4 mm)

Features

  • Low-cost 32-bit ARM Cortex-M0 replacement for 8/16-bit MCUs
  • Single power supply operation (1.8 V to 3.6 V)
  • In-System Programming (ISP) and In-Application Programming (IAP)
  • Power profiles for optimized performance/power trade-off
  • Windowed watchdog timer (XL series)
  • Fractional baud rate generator for UART

Applications

  • 8/16-bit MCU replacement
  • Industrial control and automation
  • Consumer electronics
  • White goods and appliance control
  • Remote sensors and IoT edge nodes
Product Introduction: LPC1115FBD48/303 Product Introduction

The NXP LPC1115FBD48/303 is a 32-bit ARM Cortex-M0 microcontroller from the LPC1100XL series, designed as a cost-effective upgrade path from 8-bit and 16-bit architectures. It integrates 64 kB of flash memory, 8 kB of SRAM, and operates at up to 50 MHz with single-supply operation from 1.8 V to 3.6 V. The rich peripheral complement includes one Fast-mode Plus I2C interface, one RS-485 capable UART with fractional baud rate, two SPI/SSP controllers, four general-purpose timers, a 10-bit ADC with 8 input channels, and up to 42 GPIO pins. The /303 XL series variant adds a windowed watchdog timer and configurable open-drain output mode for enhanced system reliability.

Working Principle: LPC1115FBD48/303 Working Principle

The LPC1115 is based on the ARM Cortex-M0 processor core running at up to 50 MHz, executing a subset of the Thumb-2 instruction set for high code density. The integrated Nested Vectored Interrupt Controller (NVIC) handles interrupt priorities with minimal latency. Flash memory is accessible in a single cycle for optimized performance. The power management unit supports sleep, deep-sleep, and deep power-down modes, with wake-up from deep-sleep via start logic on up to 13 pins. The PLL allows CPU operation at maximum frequency from a 12 MHz internal RC oscillator (trimmed to 1% accuracy) or external crystal. ISP enables field firmware updates via UART without a debugger.

Pin Description: LPC1115FBD48/303 Pin Definition and Functions
Pin Name Description
1-4 PIO0_1-PIO0_4 GPIO Port 0
5 VDD Power Supply (1.8-3.6 V)
6 VSS Ground
7-22 PIO0_5-PIO1_10 GPIO Port 0/1 (multiplexed with UART, I2C, SPI, ADC)
23 VDD Power Supply
24 VSS Ground
25-40 PIO1_11-PIO3_5 GPIO Port 1-3 (multiplexed with timers, ADC, SCK)
41 VDD Power Supply
42 VSS Ground
43-48 PIO3_2-PIO0_0 GPIO Port 3/0 (multiplexed with RESET, XTAL)
Application Scenarios: In which products and applications is LPC1115FBD48/303 used
  • 8/16-bit MCU Upgrade: Drop-in ARM Cortex-M0 replacement offering 32-bit performance at 8-bit price points for legacy system modernization
  • Industrial Control: PLC I/O modules with 42 GPIO, 10-bit ADC for sensor acquisition, and RS-485 UART for fieldbus communication
  • White Goods: Motor control and sensor management in washing machines, refrigerators, and air conditioners with low-power modes
  • IoT Edge Nodes: 64 kB flash runs lightweight sensor stacks with ISP enabling over-the-air firmware updates
  • Consumer Electronics: Cost-sensitive human interface devices, remote controls, and smart home peripherals
Alternative Models: What chips are recommended as replacements for LPC1115FBD48/303
Model Brand Core Flash SRAM
LPC1114FBD48/302 NXP Cortex-M0 32 kB 8 kB
LPC1115FBD48/303EL NXP Cortex-M0 64 kB 8 kB
STM32F030K6T6 ST Cortex-M0 32 kB 4 kB
ATSAMD20J18A-AUT Microchip Cortex-M0+ 256 kB 32 kB
MKE02Z64VQH4 NXP Cortex-M0+ 64 kB 8 kB

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1