Opens in a new tab

LSF0108PWR

8-ch bidirectional level translator, 0.95-5V, auto-direction, I2C/GPIO, TSSOP-20

5715

Effective Inventory

Image for reference only

Manufacturer Part:

LSF0108PWR

Package:

TSSOP-20 (6.5 x 4.4 x 1.2 mm, PW package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LSF0108PWR from Texas Instruments is an 8-channel bidirectional multi-voltage level translator supporting open-drain and push-pull signals, with auto-direction sensing and no DIR pin required, in a 20-pin TSSOP package.

Key Specifications

Channels 8
Direction Bidirectional (auto-sensing, no DIR pin)
VCCA Range 0.95V to 4.5V
VCCB Range 1.8V to 5.5V
Max Data Rate (Up) 100 MHz @ CL=30pF
Max Data Rate (Down) >100 MHz @ CL=30pF
Propagation Delay 1.5 ns (typ)
Ron Low (minimizes signal distortion)
Output Type Open Drain / Push-Pull
Enable Pin Yes (EN, active high)
I/O Tolerance 5V tolerant
ESD Protection HBM >2000V, CDM >1000V
Package TSSOP-20 (4.4 x 6.5mm)
Operating Temperature -40 to +125 C

Features

  • Bidirectional translation without direction pin
  • Supports voltage pairs: 0.95/1.2/1.8/2.5/3.3V to 1.8/2.5/3.3/5V
  • Each channel can have different translation levels
  • Supports I2C, SMBus, PMBus, MDIO, SDIO, UART, GPIO
  • 5V tolerant I/O for TTL compatibility
  • Low standby current
  • Flow-through pinout for easy PCB routing
  • Hot insertion capable
  • Latch-up >100mA per JESD 78

Applications

  • I2C/SMBus level translation between 1.8V and 3.3V/5V
  • GPIO expansion across voltage domains
  • SDIO/UART interface voltage adaptation
  • Industrial and telecom board-level interfacing
Product Introduction: LSF0108PWR Product Introduction

The LSF0108PWR from Texas Instruments is an 8-channel bidirectional multi-voltage level translator that automatically senses signal direction without requiring a direction (DIR) control pin, greatly simplifying system design for buses like I2C, SMBus, and PMBus where both master and slave can drive the same line. The device supports voltage translation between a wide range of voltage domains on the A-side (0.95V to 4.5V) and B-side (1.8V to 5.5V), including common pairs such as 1.8V-to-3.3V, 2.5V-to-3.3V, and 3.3V-to-5V. Each of the 8 channels can be configured with different translation levels independently, providing exceptional flexibility for multi-voltage system designs. The LSF0108 supports both open-drain (for I2C/SMBus) and push-pull (for SPI/UART) signal types. At capacitive loads of 30pF, up-translation supports 100MHz and down-translation exceeds 100MHz, enabling use with high-speed interfaces like SDIO and MDIO. The 5V-tolerant I/O pins are compatible with TTL levels found in industrial and telecom applications. The enable (EN) pin provides a low-power standby mode with high-impedance I/O pins when disabled. The flow-through pinout (A pins on one side, B pins on the other) simplifies PCB routing by allowing clean signal traces between voltage domains. The device is available in a 20-pin TSSOP package specified from -40 to +125C.

Working Principle: LSF0108PWR Working Principle

The LSF0108PWR operates as a passive bidirectional voltage translator using auto-sensing pass-gate architecture. Key subsystems include: (1) Pass-Gate Architecture – each channel consists of an N-channel MOSFET pass transistor connecting the A-side and B-side I/O pins; the gate of each pass transistor is biased to a voltage determined by the VREF_A and VREF_B reference inputs, typically connected to VCCA and VCCB respectively; this sets the pass transistor threshold to allow conduction when either side drives the signal; (2) Auto-Direction Sensing – when the A-side driver pulls a line low, the pass gate conducts and the B-side follows; when the B-side driver pulls low, the same conduction occurs in reverse; no direction control is needed because the pass gate conducts in both directions; for open-drain buses, external pull-up resistors on both sides restore the high level after the driver releases; (3) Voltage Translation – when one side drives low, the pass gate conducts and the other side is pulled to the low level (plus a small Ron drop); when neither side drives, the pull-up resistors on each side pull the line to that side’s supply voltage; this creates the voltage translation; (4) Reference Biasing – the VREF_A and VREF_B pins set the gate bias voltage; the gate is biased to VREF_A + Vth (approximately) ensuring the pass transistor is on when both sides are high and off when EN is low; (5) Enable Control – when EN is low, all pass gates are turned off, presenting high impedance on all I/O pins; this allows the device to be disabled for hot-insertion or power sequencing.

Pin Description: LSF0108PWR Pin Definition and Functions
Pin Name Function
1 VREF_A A-side reference voltage (connect to VCCA)
2-5 A1-A4 A-side I/O channels 1-4
6 GND Ground
7 EN Enable (high=enabled, low=all I/O high-Z)
8-11 A5-A8 A-side I/O channels 5-8
12 VCCA A-side supply (0.95V to 4.5V)
13-16 B5-B8 B-side I/O channels 5-8
17 VCCB B-side supply (1.8V to 5.5V)
18 VREF_B B-side reference voltage (connect to VCCB)
19-20 B1-B2 B-side I/O channels 1-2
Application Scenarios: In which products and applications is LSF0108PWR used
  • I2C bus translation: 1.8V MCU I2C to 3.3V/5V sensor without DIR pin, open-drain compatible
  • Multi-voltage GPIO: translate 8 GPIO lines between 2.5V FPGA and 3.3V peripheral
  • SDIO interface: 1.8V processor SDIO bus to 3.3V SD card connector at up to 100MHz
  • Industrial backplane: translate control signals between 3.3V logic and 5V TTL bus
Alternative Models: What chips are recommended as replacements for LSF0108PWR
Manufacturer Part Number Package Notes
TI LSF0108BQRUPRQ1 DHVQFN-20 Automotive QFN version
Nexperia LSF0108PW-Q100 TSSOP-20 Automotive qualified version
TI LSF0102PWR VSSOP-8 2-channel version
TI TXB0108PWR TSSOP-20 8-ch auto-direction, push-pull only
NXP PCA9306DCUR VSSOP-8 2-channel I2C level translator

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1